Soldering & desoldering

Soldering and desoldering gather here everything that is worked with an iron on a retro console: stations and irons, wire, flux and braid, but also the parts that call for soldering such as 0.5 mm FFC connectors, SMD LEDs, Game Boy speakers and USB-C charging modules.

46 items46 available right now
46 products
RMA-223 solder flux in a 10 cc syringe — with needle
Fun-Esports RMA-223 solder flux in a 10 cc syringe — with needleAvailable
$24.63
Silicone soldering mat — 14 sizes, magnetic compartments on selected models
Fun-Esports Silicone soldering mat — 14 sizes, magnetic compartments on selected modelsAvailable
$36.94
2-in-1 soldering station with iron and hot air — SMD, BGA and PCB rework
Fun-Esports 2-in-1 soldering station with iron and hot air — SMD, BGA and PCB reworkAvailable
$102.23
2032 Coin Cell Holder to Solder for Dreamcast or GameCube — with Optional LED
Fun-Esports 2032 Coin Cell Holder to Solder for Dreamcast or GameCube — with Optional LEDAvailable
$23.39
Capacitor and Inductor Kit for the Original Game Boy DMG — JCD
Fun-Esports Capacitor and Inductor Kit for the Original Game Boy DMG — JCDAvailable
$27.09
JCD Capacitor Kit for Game Boy Pocket, Color, Light, Advance and SP — One Kit per Console
Fun-Esports JCD Capacitor Kit for Game Boy Pocket, Color, Light, Advance and SP — One Kit per ConsoleAvailable
$23.39
Game Gear Capacitor Kit — 25 Parts for Main, Power and Sound Boards
Fun-Esports Game Gear Capacitor Kit — 25 Parts for Main, Power and Sound BoardsAvailable
$30.78
RGB mod kit for N64 NTSC — solder-in RGB output, optional RGB cable
Fun-Esports RGB mod kit for N64 NTSC — solder-in RGB output, optional RGB cableAvailable
$36.94
Ceramic or Steel Tip Precision Tweezers — Straight, Curved, for Soldering
Fun-Esports Ceramic or Steel Tip Precision Tweezers — Straight, Curved, for SolderingAvailable
$24.63
6-Piece Stainless Steel Precision Tweezer Set — Straight and Curved Tips
Fun-Esports 6-Piece Stainless Steel Precision Tweezer Set — Straight and Curved TipsAvailable
$29.55
13 cm Anti-Static Precision Tweezers — Fine Tips for Components and Ribbon Cables
Fun-Esports 13 cm Anti-Static Precision Tweezers — Fine Tips for Components and Ribbon CablesAvailable
$25.86
0.5 mm flip-lock FFC / FPC connectors — pack of 50, 6 to 40 pins
Fun-Esports 0.5 mm flip-lock FFC / FPC connectors — pack of 50, 6 to 40 pinsAvailable
$32.02
3.5-inch IPS screen kit for Lynx II — 640×480 and 720p HDMI output
Fun-Esports 3.5-inch IPS screen kit for Lynx II — 640×480 and 720p HDMI outputAvailable
$157.99
Precision side cutters — flush cut for soldering and modding
Fun-Esports Precision side cutters — flush cut for soldering and moddingAvailable
$22.16
ESD precision tweezers — stainless steel, extra-fine tip
Fun-Esports ESD precision tweezers — stainless steel, extra-fine tipAvailable
$22.16
12 V DC Power Connectors — 5 Screw-On Male/Female Pairs
Fun-Esports 12 V DC Power Connectors — 5 Screw-On Male/Female PairsAvailable
$20.93
28-pin FRAM memory chip FM1808, FM18W08 or FM16W08 — battery-free
Fun-Esports 28-pin FRAM memory chip FM1808, FM18W08 or FM16W08 — battery-freeAvailable
$25.86
Electrolytic capacitor kit 16-50 V — through-hole retro recap
Fun-Esports Electrolytic capacitor kit 16-50 V — through-hole retro recapAvailable
$25.86
Replacement speaker for Game Boy, GBC, GBA and GBA SP — solder-in
Fun-Esports Replacement speaker for Game Boy, GBC, GBA and GBA SP — solder-inAvailable
$22.16
Pack of 100 SMD LEDs, 0402 to 1206 — modding and backlighting
Fun-Esports Pack of 100 SMD LEDs, 0402 to 1206 — modding and backlightingAvailable
$20.93
USB-C charging module for Game Boy Advance SP — solder-in
Fun-Esports USB-C charging module for Game Boy Advance SP — solder-inAvailable
$30.78
Double-headed ESD anti-static brush — PCB and console cleaning
Fun-Esports Double-headed ESD anti-static brush — PCB and console cleaningAvailable
$24.63
PCB soldering holder with magnetic pins — workshop platform
Fun-Esports PCB soldering holder with magnetic pins — workshop platformAvailable
$24.63
T12 soldering station DIY kit — OLED display, 200 to 480 °C
Fun-Esports T12 soldering station DIY kit — OLED display, 200 to 480 °CAvailable
$44.33

Knowing in advance which retro repairs have to go through the iron

Three levels of difficulty on the same page

Soldering two wires to a Game Boy speaker takes ten minutes with a back-up iron. Fitting a USB-C charging module or a power board already means removing an original connector cleanly. Replacing a 0.5 mm pitch FFC connector, the pack of fifty covering 6 to 40 pins, or an SMD LED in a 0402 package is another matter and belongs to micro-soldering: at that scale, the 1080p digital microscope and its eight LEDs stop being a luxury.

Desoldering does more damage than soldering

It is prolonged heat that lifts the pads, not the iron itself. Hence the use of flux, braid and, where possible, hot air rather than pulling a part off mechanically. The 33 m polyimide tape is used to mask the neighbouring areas while heating, and the PCB holder with magnetic posts saves holding the board in your hand.

What it doesn't do

These products make no repair certain: a torn trace has to be bridged with wire, not with the iron alone. The 3.5-inch IPS screen kit for the Lynx II on this page calls for soldering and is nothing like a fit with no cutting. And no tool removes the need to check a pinout before heating.

Soldering irons and stations · Soldering consumables · Capacitors and recapping · Batteries and save batteries · Charging modules · Measurement and inspection · Workshop tools

Questions fréquentes

Where should you start if you have never soldered?
With a temperature-controlled iron, 0.8 mm wire, flux and braid. Practise on a dead board before touching a console. Replacing a speaker or a wire makes an accessible first job; micro-soldering comes much later.
Do you need a microscope to solder SMD?
For 0805 or 1206 packages, a good magnifying lamp is often enough. Below that, in particular for the 0402 LEDs in the pack of a hundred or 0.5 mm pitch FFC connectors, the digital microscope really does help to spot solder bridges. It is a convenience that becomes a necessity depending on the size.
What is the difference between a ribbon cable and an FFC connector?
The ribbon cable is the flexible strip; the FFC connector is the part soldered to the board that receives it. The pack of fifty flip-lock connectors at 0.5 mm pitch covers 6 to 40 pins. When a ribbon no longer holds, it is often the connector's flip-lock that has broken, not the ribbon.