Full description
TrimUI Brick Pro: the vertical form factor, with the screen resolution it was missing
The Brick Pro keeps the vertical form factor of the original Brick and makes it bigger: 3.95 inches at 1024 × 768, fully laminated IPS panel, battery raised from 3,000 to 5,000 mAh, and two analog sticks where the Brick had none. The chip, however, stays the same: this is an 8/16-bit and PlayStation 1 console, not a PlayStation 2 machine.
What it does
- Laminated 4:3 screen, 1024 × 768: 324 pixels per inch on 3.95 inches. SNES, Genesis and Game Boy Advance games display at an integer scale, with no interpolation blur.
- Two Hall effect analog sticks: symmetrical layout below the D-pad. They make Dreamcast and N64 titles that require a proportional axis playable — something the original Brick couldn't do.
- Hall effect analog L2/R2 triggers: no mechanical contact to wear out, and progressive travel that's useful in racing games.
- 5,000 mAh: 5 to 10 hours of play depending on the emulated system and brightness. USB-C charging at 5 V / 2 A.
- Interchangeable shoulder buttons included: two sets of triggers come in the box, to swap according to your grip.
What it doesn't do
- No PlayStation 2, no GameCube. The Allwinner A133 Plus is exactly the same as in the original Brick: there's no performance gain between the two models, only a screen and a battery.
- N64, Dreamcast, Nintendo DS and PSP: partial. Some titles run, others don't, and the result depends on the firmware as much as on the game.
- 3D Saturn, Wii, 3DS, Wii U and Switch: out of reach. No setting will change that.
- 1 GB of RAM and 8 GB of internal storage. A microSD card isn't a nice-to-have, it's a necessity — and it isn't included.
- Supplied without games, in compliance with the law. You play what you own.
What it emulates
Out of the box: NES, Master System, SNES, Genesis, Game Boy, Game Boy Color, Game Boy Advance, PlayStation 1, Neo Geo, PC Engine and classic arcade (CPS-1/2/3, MAME 2003 Plus).
With compromises: Nintendo 64, Dreamcast, Nintendo DS, PSP — title by title.
Not supported: 3D Sega Saturn, GameCube, PlayStation 2, Wii, Nintendo 3DS, Wii U, Switch.
On delivery
The console arrives with its TrimUI Linux firmware already installed and working. There's nothing to flash to get started: add a microSD card and your own files, and play. Community firmwares (CrossMix, muOS) can then be installed on the card, without touching the internal memory.
In the box
- 1 TrimUI Brick Pro console
- 1 USB-C charging cable
- 1 set of interchangeable shoulder buttons
- 1 user manual
No microSD card, no wall charger, no games.
Read before ordering: all TrimUI consoles · the handheld console comparison tool · where to play legally
TrimUI Brick Pro — Vertical Retro Handheld, 3.95" 1024×768 Screen and Dual Hall Sticks
TrimUI Brick Pro — écran 3,95 pouces 4:3 laminé, double stick à effet Hall, firmware Linux prêt à l'emploi.
What it means for you
- Your SNES et antérieur library in your pocket
- 10.0 h of play on a single charge
- Nothing to set up, it just works
What’s inside
- Allwinner A133 Plus - 1 Go LPDDR3
- 3.95 inches - IPS entièrement laminé
- 8 Go eMMC + microSD jusqu'à 1 To - Wi-Fi 4
In stock
📦Ships within 3 to 5 working days · Delivered in 10 to 18 working days · Console shipping: from €6.90, calculated at checkout, not covered by free shipping from €69.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
Ce qu'elle fait tourner, et ce qu'elle ne fera pas
L'Allwinner A133 Plus du Brick Pro est le même que celui du Brick sorti l'an dernier : la génération 8 et 16 bits, la Game Boy Advance et la PlayStation 1 tournent sans y penser. Le Nintendo 64, la Dreamcast, la DS et la PSP passent selon les titres. La PlayStation 2 et la GameCube, non — et aucun firmware ne changera cela.
324 pixels par pouce sur une dalle 4:3
C'est là que se joue la différence avec le Brick d'origine : 1024 × 768 sur 3,95 pouces, entièrement laminé, sans lame d'air entre la dalle et la vitre. Le format 4:3 accueille la SNES et la Mega Drive sans bandes noires latérales, et la définition permet un agrandissement en multiple entier — l'image reste nette au lieu d'être interpolée.
Prête à jouer, rien à flasher
Le firmware Linux de TrimUI est installé et fonctionnel à la sortie de la boîte. Vous ajoutez une carte microSD — elle n'est pas fournie — vos propres fichiers, et vous jouez. Les firmwares communautaires comme CrossMix ou muOS s'installent plus tard sur la carte, sans jamais toucher à la mémoire interne : la console reste récupérable.
What this console runs
Specifications verified on the original firmware · verified on
Smooth, no tweaking · 2 systems
- SNES et antérieur
- PlayStation 1
Playable, with some tinkering
- Nintendo 64
- Dreamcast
- Nintendo DS
- PSP
Out of reach
- Sega Saturn
- GameCube
- PlayStation 2
- Nintendo Wii
- Nintendo 3DS
- Wii U
- Switch
See full specifications+
Screen
- Screen size
- 3.95 inches
- Aspect ratio
- 4:3
- Resolution
- 1024 × 768
- Panel type
- IPS entièrement laminé
- Refresh rate
- 60 Hz
Performance and memory
- Chip (SoC)
- Allwinner A133 Plus
- Processor
- ARM Cortex-A53 — 4 cœurs, 1.8 GHz
- GPU
- PowerVR GE8300 — 660 MHz
- RAM
- 1 Go LPDDR3
- Storage
- 8 Go eMMC + microSD jusqu'à 1 To
- Operating system
- Linux (firmware TrimUI)
- Battery
- 5000 mAh
Controls
- Croix directionnelle en haut
- Sticks doubles symétriques
- Sticks à effet Hall
- L1/R1
- L2/R2 à effet Hall
- L3/R3
- Gâchettes analogiques
- Boutons de volume
- Boutons d'épaule interchangeables fournis
Ports
- Wi-Fi 4
- Bluetooth 4.2
- USB-C
- Sortie vidéo
- Prise casque
- Lecteur de carte microSD
- Lecture depuis clé USB (FAT32)
Format
- Weight
- 236 g
- Dimensions
- 129,9 × 86,6 mm
- Material
- Plastique (ABS + PC)
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🎮 Jusqu'où émule-t-elle vraiment ?
Sans réglage : NES, Master System, SNES, Mega Drive, Game Boy, Game Boy Color, Game Boy Advance, PlayStation 1, Neo Geo, PC Engine et l'arcade classique. Avec des compromis et titre par titre : Nintendo 64, Dreamcast, Nintendo DS, PSP. La PlayStation 2, la GameCube, la Wii, la 3DS et la Switch sont hors de portée.
🔍 Quelle différence avec le TrimUI Brick d'origine ?
L'écran passe de 3,2 à 3,95 pouces et du format 1:1 au 4:3 en 1024 × 768, la batterie de 3 000 à 5 000 mAh, et deux sticks analogiques à effet Hall apparaissent. La puce Allwinner A133 Plus, elle, est identique : aucun gain de puissance.
💾 Une carte microSD est-elle fournie ?
Non. La console dispose de 8 Go de mémoire interne, occupés par le système. Prévoyez une carte microSD — jusqu'à 1 To sont reconnus, mais 128 ou 256 Go suffisent largement pour les systèmes qu'elle émule.
🕹️ Des jeux sont-ils inclus ?
Non. La console est livrée sans jeux, conformément à la loi. Vous y placez les contenus que vous possédez ou que vous obtenez légalement.
🔋 Quelle autonomie réelle ?
Le constructeur annonce 5 à 10 heures selon le système émulé et la luminosité. Comptez le haut de la fourchette en 8/16 bits, le bas en PSP ou Dreamcast. Recharge USB-C en 5 V / 2 A.
🐧 Peut-on installer un autre firmware ?
Oui. CrossMix et muOS s'installent sur la carte microSD, sans modifier la mémoire interne. Le firmware TrimUI d'origine reste disponible en retirant simplement la carte.
🚚 Quels sont les délais de livraison ?
Livraison en 10 à 18 jours, expédition sous 3 à 5 jours.
🛡️ Quelle garantie s'applique ?
Garantie légale de conformité de 2 ans. Retour sous 14 jours. SAV français, réponse sous 1 jour ouvré.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: chip, screen, systems actually emulated, condition on delivery. Many models that come out never make it into the catalogue.
A question, a firmware problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to this console and to what it runs.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on





