Full description
3.5-inch IPS screen kit for Sega Nomad: the portable Mega Drive finally readable
The original Sega Nomad screen is blurry and leaves trails in fast scenes. This kit replaces it with a 3.5-inch IPS panel at 640 × 480, driven by an RGB board and adjustable through an OSD menu. This is an advanced modification that requires soldering.
What it does
- 640 × 480 IPS panel: sharp, high-contrast picture, wide viewing angles.
- Dedicated RGB board: the screen receives the console's video signal through a supplied conversion board.
- OSD menu: MODE + A + B for one second opens the menu; 15 brightness levels, 8 colour modes, retro pixel effects and scanlines.
- Screen lens included: a new protective lens comes with the screen.
What it doesn't do
- This is not a no-solder kit. Several wires need to be soldered to the Nomad's motherboard.
- It is suitable neither for the Game Gear nor for the PC Engine GT.
- It does not fix the Nomad's original capacitors, which are known to leak: replacing them at the same time is recommended.
- Mounting the screen in the shell requires a suitable bracket, often 3D-printed, to be sourced separately.
Compatibility
Sega Nomad (1995) only. Not compatible with the Game Gear, the PC Engine GT or other handheld consoles.
Skill level required
Advanced level. You need to disassemble the Nomad, remove the original screen, then solder several wires between the kit board and the motherboard following a reliable wiring diagram. Have a fine-tip soldering iron, thin wire, a security screwdriver suited to the shell and some patience ready. At first power-on, brightness may be set to minimum: open the OSD menu before concluding there is a fault.
In the box
- 1 3.5-inch IPS screen (640 × 480).
- 1 RGB conversion board.
- 1 protective lens.
- 1 double-sided adhesive.
- Connection wires.
Delivery in 10 to 18 days · dispatched within 3 to 5 days · 2-year legal guarantee · 14-day returns.
3.5-inch IPS screen kit for Nomad — 640 × 480, OSD menu
640 × 480 IPS panel with RGB board and OSD menu to replace the original Sega Nomad screen.
In stock
📦Dispatched within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: modernising a Nomad
The Nomad runs Mega Drive cartridges on the go, but its original screen is blurry and smears. You disassemble the console, replace its tired capacitors, remove the old screen and solder the kit board. Once closed, the console displays a sharp picture at 640 × 480.
The part: a 3.5-inch IPS screen with RGB board
The kit pairs a 3.5-inch 640 × 480 IPS panel with an RGB conversion board that receives the console's signal. Its OSD menu offers 15 brightness levels, 8 colour modes, retro pixel effects and scanlines. A new protective lens is included.
Before soldering: preparing the job
This is an advanced modification: have a fine-tip soldering iron, a reliable wiring diagram, a mounting bracket suited to the Nomad and, ideally, a set of new capacitors ready. If the screen stays black, remember the OSD menu. A question during installation? Our customer service replies within 1 business day.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- 3.5-inch IPS panel at 640 × 480
- OSD menu: 15 brightness levels, 8 colour modes
- Retro pixel effects and scanlines
- New protective lens included
What it doesn’t do
- Several wires to solder on the motherboard
- Mounting bracket to be sourced separately
- Sega Nomad only, not the Game Gear
- Capacitor replacement recommended at the same time
See full specifications+
Material and size
- Accessory type
- IPS screen
Compatible with
- Sega Nomad (1995)
In the box
- 1 3.5-inch 640 × 480 IPS screen
- 1 RGB conversion board
- 1 protective lens
- 1 double-sided adhesive
- Connection wires
Information and safety
Instructions for use and legal information about the product
Spare parts and modding: installation and safety
- Installation is carried out by the user. It requires disassembly or electronics skills and may void the original console manufacturer's warranty.
- Switch the device off and remove batteries before opening it.
- Components sensitive to static electricity: touch a grounded metal surface or wear an antistatic wrist strap before handling them.
- Screens and glass: if broken, the glass can cut.
- Respect the voltage stated on the product page: the wrong power supply destroys the module.
- Contains small parts: not suitable for children under 3.
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔧 Do I need to solder to install this kit?
Yes. Several wires need to be soldered between the kit board and the Nomad's motherboard. Follow a reliable wiring diagram and work with a fine-tip soldering iron.
🎮 Is it compatible with the Game Gear?
No. This kit is designed for the Sega Nomad only. It is not suitable for the PC Engine GT either.
🔩 How do I mount the screen in the shell?
With a bracket suited to the Nomad, often 3D-printed, to be sourced in addition to the kit. The supplied double-sided adhesive holds the screen in place.
💡 The screen stays black after installation, what should I do?
First open the OSD menu (MODE + A + B for one second): brightness may be set to minimum out of the factory. Then check your solder joints.
📦 What is in the box?
A 3.5-inch 640 × 480 IPS screen, an RGB conversion board, a protective lens, a double-sided adhesive and connection wires.
🧰 What tools do I need?
A fine-tip soldering iron, thin wire, a security screwdriver suited to the Nomad's shell, fine tweezers and ideally a magnifier. Also plan for new capacitors if the original ones have never been replaced.
🚚 What are the delivery times?
Delivery in 10 to 18 days, dispatched within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Our customer service replies within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on