Full description
Polyimide tape: the area you heat is the only one that gets hot
As soon as a soldering iron or a hot air gun gets near a console, everything around it becomes vulnerable: shell plastic, screen ribbon cable, polarising film, battery wrap. This amber polyimide tape, 0.05 mm thick, withstands reflow and rework temperatures, doesn't melt and then comes off without leaving adhesive on the part.
What it does
- Masks the area to protect: cover the ribbon cable, connector, screen panel or plastic before heating, then remove the tape once the solder has cooled.
- Insulates electrically: the 0.05 mm polyimide film is used to insulate a repaired trace, a jumper wire or the back of a board against a shield.
- Holds a part in place: temporarily holds a ribbon cable, a wire or a module while you solder, without a permanent dab of glue.
- Five widths: 5, 10, 20, 30 or 40 mm, depending on whether you are masking a single pin or the whole back of a board. 33 m roll in every case.
What it doesn't do
- It is not high-voltage insulating tape: it insulates console voltages, not mains.
- It does not protect against direct, prolonged contact with the iron tip — it is a heat screen, not a shield.
- It does not stick durably to a greasy, dusty or silicone-coated surface: degrease with isopropyl alcohol before applying.
- It is not a permanent mounting adhesive: to reattach a screen panel or a battery, you need a dedicated double-sided adhesive.
- One colour only, the original translucent amber of polyimide: don't count on it for a visible cosmetic finish.
Compatibility
Universal workshop tape: it does not depend on any particular console. It is used on the motherboards and ribbon cables of retro handheld consoles (Game Boy, Game Boy Advance, PSP, DS), on home consoles being recapped, on controllers and arcade sticks, as well as on Li-ion batteries and 3D prints. It replaces no original part and is not a substitute for the seals or foam padding fitted by the manufacturer.
Skill level required
No soldering and no tools needed to use it: cut the length you need with scissors or a craft knife and apply. The tape is, however, aimed at people who already open consoles: have the right screwdriver for your machine, an opening spudger and isopropyl alcohol to prepare the surface. Remove the tape while the part is still warm, it peels off more cleanly.
In the box
- 1 roll of amber polyimide tape, 33 m long, 0.05 mm thick
- Width depending on the variant chosen: 5, 10, 20, 30 or 40 mm
Listing verified on 19 August 2026. Read before ordering: Retro peripherals
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
High-temperature polyimide tape 33 m — soldering and rework
33 m roll, five widths: mask, heat, peel off without a trace.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
ℹFrom 150 €, delivery is made to a pickup point.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: protect before you heat
The critical moment in a repair isn't the soldering itself, it's what happens next to it. A hot air gun warps a shell in a few seconds, a slipping tip marks a polarising film. The workshop reflex is to cover the neighbouring area with polyimide tape before switching anything on. Once the part has cooled, the tape comes off in one piece and the console shows no trace of the work.
The material: why polyimide
Polyimide is the amber film used in electronics because it combines three properties rarely found together: it withstands heat, it insulates electrically and its silicone adhesive comes off without residue. Ordinary sticky tape does two out of three, then melts and leaves a sticky film you have to scrape off. Here, a thickness of 0.05 mm is enough to slide the tape under a shield or between two ribbon cables.
The limit: choosing the right width
A roll that is too wide is hard to cut and wastes material, a roll that is too narrow forces you to apply three overlapping strips. Allow 5 or 10 mm to mask pins and traces, 20 mm for a ribbon cable or a connector, 30 and 40 mm for the back of a board or a battery. And know what this tape is not: neither mains insulation nor permanent mounting adhesive. It is a protective consumable, nothing more.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Withstands soldering and rework temperatures
- Comes off without leaving sticky residue
- 0.05 mm electrically insulating film
- Five widths from 5 to 40 mm
- 33 m roll
What it doesn’t do
- Does not replace high-voltage insulating tape
- Does not protect against direct contact with the iron tip
- Does not stick to greasy, dusty or silicone-coated surfaces
- Not a permanent mounting adhesive
- One colour only: translucent amber
See full specifications+
Material and size
- Accessory type
- Heat protection tape
Compatible with
- Retro handheld consoles
- Retro home consoles
- Motherboards and printed circuit boards
- Ribbon cables and connectors
- Controllers and arcade sticks
- Li-ion batteries
In the box
- 1 roll of amber polyimide tape, 33 m
- Thickness 0.05 mm
- Width depending on variant: 5, 10, 20, 30 or 40 mm
Information and safety
Instructions for use and legal information about the product
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔥 Up to what temperature does this tape hold?
Polyimide film is designed for soldering and rework operations: it doesn't melt or shrink when exposed to hot air. However, it does not replace a metal shield in the event of direct, prolonged contact with the iron tip.
🧷 Does it leave adhesive behind when you remove it?
No. The silicone adhesive peels off cleanly, especially if you remove the tape while the part is still warm. If any residue remains, a cotton bud soaked in isopropyl alcohol is enough.
🎮 Which consoles can I use it on?
All of them. It is a universal workshop consumable: motherboards, ribbon cables, connectors, shells, controllers, arcade sticks, batteries. It is not tied to any model or revision.
⚡ Is it really electrically insulating?
Yes, for the voltages found in a console: insulating a repaired trace, a jumper wire or the back of a board against a shield. It is not insulating tape approved for household mains wiring.
📏 Which width should I choose?
5 and 10 mm to mask pins and traces, 20 mm for a ribbon cable or a connector, 30 and 40 mm for the back of a board, a shield or a battery. All widths come on a 33 m roll.
📦 What's in the box?
One 33 m roll of amber polyimide tape, 0.05 mm thick, in the width chosen when ordering. No tools are supplied.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days. French customer service, reply within 1 business day.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Listing verified on 19 August 2026.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on




