Full description
GuliKit SD05 joystick: replacing a drifting stick on Steam Deck OLED
Analogue stick drift most often comes from wear on the potentiometer tracks. The GuliKit SD05 module replaces this mechanism with a Hall effect sensor: a magnet and a probe measure the stick position without friction. It is designed for the Steam Deck OLED and fits in place of the original joystick.
What it does
- Contactless measurement: the Hall effect eliminates the friction of resistive tracks, the leading cause of drift in conventional sticks.
- Replacement module: it takes the place of the original Steam Deck OLED joystick, screwed in and connected, without soldering.
- Three pack sizes: standard, pack of 5 or pack of 10 for a repair workshop.
What it doesn't do
- It is not suitable for the Steam Deck LCD: the SD05 module is designated for the OLED version.
- If the drift comes from a damaged ribbon cable or from the motherboard, changing the stick will not fix it.
- The console is not included, and opening the Steam Deck is done at your own risk.
- Plan to recalibrate the sticks after fitting.
Compatibility
Steam Deck OLED. Not covered: the Steam Deck LCD, controllers and other handheld consoles.
Skill level required
No soldering. You need to remove the back shell of the Steam Deck, disconnect the battery, then unscrew and disconnect the joystick module before fitting the new one. Have a precision Phillips screwdriver, a plastic spudger and fine-nose pliers ready. Intermediate level. After reassembly, recalibrate the sticks in the SteamOS settings.
In the box
- GuliKit SD05 joystick module(s): standard pack, pack of 5 or pack of 10 depending on the variant.
Tools not included.
Delivery in 10 to 18 days · dispatched within 3 to 5 days · 2-year legal guarantee · 14-day returns.
GuliKit SD05 Hall effect joystick for Steam Deck OLED — contactless sensor
GuliKit Hall effect joystick module for Steam Deck OLED, to put an end to stick drift.
In stock
📦Dispatched within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The job: getting rid of drift
A character moving on its own, a camera turning without touching the stick: that is drift. On the Steam Deck OLED, the joystick is a module that can be replaced without soldering. You open the back shell, disconnect the battery, change the module and recalibrate. The console gets a stable neutral point back.
The part: a friction-free sensor
A conventional stick measures its position with resistive tracks that wear with every movement. The GuliKit SD05 uses the Hall effect: a magnet and a probe, with no contact between them. GuliKit is a manufacturer known to repairers for its Hall effect sticks, and the SD05 is its model for the Steam Deck OLED.
Our support: repairing without risk
Before opening, check that your console really is a Steam Deck OLED: this module is not designed for the LCD version. Always disconnect the battery before touching the ribbon cables. If in doubt about the cause of the drift, write to us: our customer service replies within 1 business day.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- Hall effect sensor, contactless measurement
- Eliminates track wear, the usual cause of drift
- Solder-free fitting: module screwed in and connected
- Packs of 5 and 10 for workshops
Ce qu’il ne fait pas
- For Steam Deck OLED only, not the LCD version
- Does not fix drift caused by a ribbon cable or the motherboard
- Opening the console required
- Recalibration needed after fitting
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Replacement joystick
Compatible avec
- Steam Deck OLED
Dans la boîte
- GuliKit SD05 joystick module(s) — standard pack, pack of 5 or pack of 10 depending on the variant
Informations et sécurité
Consignes d'utilisation et informations légales du produit
Pièces détachées et modding : installation et sécurité
- Installation réalisée par l'utilisateur. Elle demande des compétences en démontage ou en électronique et peut annuler la garantie constructeur de la console d'origine.
- Éteignez l'appareil et retirez piles et batterie avant de l'ouvrir.
- Composants sensibles à l'électricité statique : touchez une surface métallique reliée à la terre ou portez un bracelet antistatique avant de les manipuler.
- Écrans et vitres : en cas de casse, le verre peut couper.
- Respectez la tension indiquée sur la fiche : une mauvaise alimentation détruit le module.
- Contient des petites pièces : ne convient pas aux enfants de moins de 3 ans.
Origine, responsable et contact
- Produit et emballage d'origine fabricant : les inscriptions peuvent être en chinois ou en anglais. Les caractéristiques du produit sont décrites en français sur cette page.
- Utilisez ce produit uniquement pour l'usage décrit sur cette page, en suivant les consignes ci-dessous.
- Responsable de la mise sur le marché dans l'UE : JMR-Service (Fun-Esports). Pour ses coordonnées complètes, reportez-vous à nos CGV.
- Un problème de sécurité (surchauffe, odeur de brûlé, pièce cassée) ? Arrêtez d'utiliser le produit et écrivez-nous à contact@fun-esports.com.
- Garantie, retours et rétractation : voir notre page Garantie et retours.
Frequently Asked Questions
🔧 Do I need to solder to install this joystick?
No. The module is screwed in and connected in place of the original joystick, after opening the back shell and disconnecting the battery.
🎮 Is it compatible with the Steam Deck LCD?
No. The SD05 module is intended for the Steam Deck OLED only.
🧲 What does the Hall effect bring?
The stick position is measured by a magnet and a probe, without contact. There are therefore no tracks wearing out through friction, which is the usual cause of drift.
📦 What is in the box?
The GuliKit SD05 module(s) according to the chosen variant: standard pack, pack of 5 or pack of 10. Tools are not included.
🧰 What tools do I need?
A precision Phillips screwdriver, a plastic spudger for the back shell and fine-nose pliers for the connectors.
🎯 Do I need to recalibrate after fitting?
Yes, recalibrate the sticks in the SteamOS settings after reassembly, so that the neutral point and the extremes are correctly recognised.
🚚 What are the delivery times?
Delivery in 10 to 18 days, dispatched within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Customer service replies within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le