Description complète
Game Gear USB-C power board: bring a console that no longer starts back to life
On a Game Gear, the most common fault is not the screen but the power board: leaking capacitors, a tired regulator, a console that shuts down after a few seconds or refuses to switch on. This replacement board takes over the role of the original unit and switches the power input to USB-C. It is a bare part that has to be soldered in.
What it does
- Replaces the original power unit: you start again from a new board instead of attempting a capacitor replacement on an already corroded board.
- USB-C input: the period power socket makes way for a USB-C connector, powered by a standard off-the-shelf charger.
- Two versions depending on the revision: one for VA0, VA1 and VA2 motherboards, one for VA4 and VA5.
What it doesn't do
- It does not repair the screen, the audio amplifier or the motherboard capacitors: if the picture is scrambled or there is no sound after the replacement, the fault lies elsewhere.
- It cannot be fitted without soldering: you have to desolder the old board and solder in the new one.
- Not suitable if your motherboard revision has not been identified — the two versions are not interchangeable.
- No USB-C cable, charger or screws come with the board.
- It does not upgrade the original LCD panel: this is not a backlit screen kit.
Compatibility
Sega Game Gear handheld console only. Choose the version that matches your motherboard revision: VA0 / VA1 / VA2 or VA4 / VA5. The revision is silkscreened on the motherboard, visible once the back shell is removed. No other console is covered, and a board ordered in the wrong version cannot be wired to the other revision.
Skill level required
Only for people who have desoldered before. Full disassembly of the console with a small Phillips screwdriver, removal of the old board with desoldering braid, then soldering of the new one. You will need a fine-tip soldering iron, solder, braid and a multimeter to check the voltage before closing the shell. Allow one to two hours the first time.
In the box
- 1 USB-C power board, in the version matching the selected revision.
Read before ordering: Retro peripherals
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
USB-C power board for Game Gear — revisions VA0 to VA5
Solder-in spare part for Game Gear — choose the version according to your motherboard revision.
En stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
The job: getting power back into a silent Game Gear
A Game Gear that no longer switches on, shuts down after a few seconds or has crackling sound almost always has a power problem. The original power unit is the first victim of time: leaking capacitors, eaten-away traces, a tired regulator. Replacing the whole board avoids a capacitor replacement with uncertain results on a circuit that is already damaged. The rest of the console — LCD panel, amplifier, buttons — is not affected by this job.
The part: one version per motherboard revision
The Game Gear went through several motherboard revisions, and the power supply is not wired the same way on each. This part therefore comes in two versions: VA0/VA1/VA2 on one side, VA4/VA5 on the other. The revision is printed on the motherboard, under the back shell. The power input switches to USB-C, which saves you hunting for a working period mains adapter.
Support: a part for an equipped workshop
This board is nothing like a plug-and-play accessory: you have to open the console, remove the old board and solder in the new one. Allow one to two hours with a fine-tip soldering iron, desoldering braid and a multimeter. If you have never desoldered before, practise on a scrap board first. Listing verified on 19 August 2026; if you are unsure about your revision, write to us: reply within 1 business day.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- Replaces the original power unit rather than patching up a corroded board
- USB-C input instead of the period power socket
- Two versions depending on the motherboard revision: VA0/VA1/VA2 or VA4/VA5
- Bare part, with no proprietary electronics or software
Ce qu’il ne fait pas
- Full disassembly and soldering required
- No USB-C cable or charger supplied
- Does not repair the screen, the audio amplifier or the motherboard capacitors
- The motherboard revision must be identified before ordering
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Power board
Compatible avec
- Sega Game Gear (VA0, VA1, VA2 motherboard)
- Sega Game Gear (VA4, VA5 motherboard)
Dans la boîte
- 1 USB-C power board, in the version matching the selected revision
Frequently Asked Questions
🔧 Do I need to solder to install this board?
Yes. You have to desolder the old power board and solder the new one onto the same points. This is not a part that clips in or connects with a ribbon cable.
🎮 Which version should I choose, VA0/VA1/VA2 or VA4/VA5?
The revision is silkscreened on the Game Gear motherboard, visible once the back shell is removed. Open the console and note it down before ordering: the two versions are not interchangeable.
🔌 Do I still need the original mains adapter?
No: the power input switches to USB-C, so a standard USB-C charger is enough. No cable or charger is supplied with the board.
🖥️ Will it fix a dead picture or crackling sound?
Only if the fault came from the power supply. A dead LCD panel, a faulty audio amplifier or leaking capacitors on the motherboard require other parts.
📦 What's in the box?
One power board, in the version matching the selected revision. No cable, no screws, no additional components.
🧰 What tools do I need?
A small Phillips screwdriver, an opening tool, a fine-tip soldering iron, desoldering braid and solder. A multimeter is useful for checking the voltage before closing the console.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le