Description complète
IPS screen kit for Game Boy DMG: a green 1989 screen replaced by a readable panel
The original Game Boy DMG-01 screen has no backlight at all: without a lamp over your shoulder, you can't see a thing. This kit replaces the entire display assembly with a 2.6-inch IPS panel, run by a dedicated driver board, with its ribbon cable and front lens. The console keeps its original motherboard, buttons and sound.
What it does
- 2.6-inch IPS panel: same diagonal as the original screen, wide viewing angles and a picture you can read indoors without an extra lamp.
- Driver board included: the kit is complete — panel, board, flat ribbon cable and front lens are supplied together, not pieced together from three separate listings.
- Original console retained: motherboard, buttons, speaker and cartridges remain those of your console. It is a display replacement, not a new console.
What it doesn't do
- It does not fit an original shell without modification. You need to enlarge the screen window, shave down screw posts and rework the contrast wheel recess. Plan for a pre-cut shell if you don't want to file.
- Soldering is still required with this type of kit, at least for the speaker. This is not an installation you can do without a soldering iron.
- Game Boy DMG-01 only. Not the Game Boy Pocket, Game Boy Light, Game Boy Color or Game Boy Advance.
- It does not add a rechargeable battery, a USB-C port or improved sound. Those are three separate mods.
- An IPS panel draws more power than the original screen: battery life on four AA batteries drops, and the motherboard's background hiss becomes slightly more audible through headphones.
- Supplied without games, in compliance with the law.
- Not taken back once fitted. Do a dry fit with the console open before cutting anything.
Compatibility
Original Game Boy, model DMG-01. The 2.6-inch diagonal matches the screen of this console. Original shell: can be fitted after cutting. Pre-cut "IPS ready" shell: fits without cutting.
What is not covered: Game Boy Pocket, Game Boy Light, Game Boy Color, Game Boy Advance and Game Boy Advance SP. These models have their own kits, with other diagonals and other ribbon cables.
Skill level required
Advanced. Full teardown, cutting the shell with a file or rotary tool, soldering the speaker, centring the panel and gluing the lens. Tools: Y1 tri-wing and #00 Phillips screwdrivers, plastic spudger, needle files or rotary tool, soldering iron and flux, isopropyl alcohol, precision double-sided tape. Allow a good hour and a half for a first installation.
In the box
- 1 × 2.6-inch IPS panel mounted in its bracket
- 1 × driver board
- 1 × flat connecting ribbon cable
- 1 × front lens
No shell, speaker, tools or batteries.
Read before ordering: Game Boy & Game Boy Color IPS screens
2.6-inch IPS screen kit for Game Boy DMG — panel, driver board, ribbon cable and lens
Complete kit for Game Boy DMG-01 — shell cutting and speaker soldering required.
En stock
📦Delivery in 10 to 18 days · ships within 3 to 5 days
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
The job: opening a 1989 console and giving it a picture back
You undo the six tri-wing screws, lift out the motherboard, remove the old display assembly and its silicone ribbon cable — the very one that causes missing lines as it ages. In their place go an IPS panel, its driver board and its flat ribbon cable. The original green disappears, while the console remains entirely vintage.
The part: why the diagonal matters
IPS kits for the DMG come in two schools: those that keep the original display area, and those that enlarge it to fill the whole window. The latter require a specific lens and a centring bracket sold separately. This panel is listed at 2.6 inches, the diagonal of the original screen, and its lens is included.
The support: tools, shell and customer service
Installation requires a Y1 tri-wing, a #00 Phillips, a soldering iron and something to file with. A pre-cut shell avoids the cutting and saves you an hour. On the shop side: French customer service, reply within 1 business day, a 2-year legal guarantee of conformity and 14 days to change your mind, as long as the kit has not been fitted.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- 2.6-inch IPS panel, same diagonal as the original screen
- Complete kit: panel, driver board, ribbon cable and lens
- Wide viewing angles, picture readable without an extra lamp
- Original motherboard, buttons and cartridges retained
Ce qu’il ne fait pas
- Cutting the original shell is mandatory: screen window, screw posts, contrast wheel
- Speaker soldering required: this is not an iron-free installation
- Game Boy DMG-01 only: not Pocket, Light, Color or Advance
- Does not add a rechargeable battery, USB-C or improved sound
- Reduced battery life on AA batteries and slightly more audio hiss
- Supplied without games, in compliance with the law
- Not taken back once fitted: dry-fit before any cutting
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- IPS screen kit
Compatible avec
- Game Boy DMG-01 (original model)
- Pre-cut IPS ready shell
- Original shell after cutting
Dans la boîte
- 1 × 2.6-inch IPS panel mounted in its bracket
- 1 × driver board
- 1 × flat connecting ribbon cable
- 1 × front lens
Frequently Asked Questions
🔧 Do I need to solder to install this kit?
Yes, at least the speaker, which has to be moved or rewired with this type of installation. A 30 to 60 W soldering iron and flux are enough. This is not a solder-free kit.
🎮 Which consoles is it compatible with?
The original Game Boy, model DMG-01, only. Not the Game Boy Pocket, Game Boy Light, Game Boy Color, Game Boy Advance or Advance SP: these models have their own kits, with other diagonals and other ribbon cables.
✂️ Do I need to cut the shell?
Yes, on an original shell: you need to enlarge the screen window, shave down screw posts and rework the contrast wheel recess. On a pre-cut "IPS ready" shell, no cutting is needed.
🔋 Does it use more power?
Yes. An IPS panel draws more than the original screen: battery life on four AA batteries drops, and the motherboard's background hiss becomes slightly more audible through headphones. That is the price of a readable picture.
📦 What's in the box?
A 2.6-inch IPS panel mounted in its bracket, a driver board, a flat connecting ribbon cable and a front lens. No shell, speaker, tools or batteries.
🧰 What tools do I need?
Y1 tri-wing and #00 Phillips screwdrivers, plastic spudger, needle files or rotary tool, soldering iron and flux, isopropyl alcohol, precision double-sided tape. Our tool kits in the Workshop & Modding section cover everything.
⏱️ How long does installation take?
A good hour and a half for a first installation, cutting included. The tricky part is not the electronics but the shell: a botched cut cannot be undone. Dry-fit the kit with the console open before filing anything.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns as long as the kit has not been fitted. French customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le