Full description
Fizz keycaps that stay crisp game after game
A keyboard gets lived on: crumbs, dust, the greasy film fingers leave after three hours of ranked. The good news is that a PBT set comes back to like-new without any special precautions. This 12-key Fizz set gets a quick surface clean day to day and a deep clean once or twice a year.
The quick routine, the one you'll actually do
With the keyboard unplugged, wipe the tops of the caps with a barely damp microfiber cloth, then dry right away. For the gaps, a soft-bristle brush is enough to dislodge what builds up between the rows. Five minutes every two weeks and the problem is solved.
The deep clean, caps removed
- Removal: take off the 12 keys with the puller included in the set.
- Soaking: lukewarm water and a drop of dish soap, for about twenty minutes.
- Rinsing: with clean water, without scrubbing the inside of the stems.
- Drying: flat on a towel, until all moisture is gone before clipping them back on.
Why the design doesn't wear off
DYE-SUB printing dyes the material instead of laying a coat on top. No varnish to flake, no legend fading under the sponge: that's exactly what sets this process apart from surface printing. PBT, for its part, doesn't develop the sticky shine that some stock keycaps end up with.
What to avoid
Denatured alcohol, acetone, abrasive sponges, the dishwasher: three of the four attack the texture and the fourth warps the stems with heat. Lukewarm water and a little patience work better, and the original grain stays intact.
The look: sea foam, coral and deep blues
Fizz brings his marine turquoises, deep-water blues and coral highlights, with that mischievous amphibian silhouette that pops on a dark keyboard. A fresh set, more playful than warlike.
In the same waters
Nautilus keycaps take the deep-sea vibe somewhere heavier and more metallic, while Pyke keycaps offer a much darker take. To stick with bright blues, check out the Kai'Sa keycaps.
Your care questions
Can you clean the keys without removing them?
Yes, for routine care. Removing them is only useful to reach what falls under the caps.
Can water damage the 12 keys?
No, they are solid plastic parts. The only thing to watch is the keyboard itself, which should stay away from the sink.
Set of 12 keys with puller.
Fizz League of Legends Keycaps – Easy-Care PBT
Fizz set: 12 PBT keycaps in bright colours, easy to keep clean, for the fast hands of mid players.
In stock
📦Delivery in 10 to 18 days · dispatched within 3 to 5 days.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
Fizz, the trickster of the reefs
Fizz is small, aquatic and insufferable: he dives in, pops out, kills and leaves again. His world pulls towards water and reefs, with a trident, a scale and colours that are not looking to be discreet. It is a lively set, spotted instantly on a black keyboard and forming a colourful row on a white one. The 12 keycaps are enough to mark the area that matters: WASD, ability keys, or simply the row you hammer the most. The audience follows the champion — mobile mid players who like a colourful desk and a keyboard that does not take itself seriously.
Bright colours, hurried fingers: upkeep
A light set shows everything, that is its trade-off: a fingerprint is visible where a black set hides it. The material works in your favour — PBT is harder and drier than the ABS fitted as standard on most keyboards, and it does not take on the sticky shine that appears on the most-typed keys. The pattern is dye-sublimated (DYE-SUB): the dye sinks into the material instead of being laid on top, so there is no layer to wear or chip, and a fingernail feels no extra thickness on the legend. Fitting is done by hand on the MX cross-stem, with the puller included, no glue and no soldering, and it stays reversible.
What the Fizz set does not contain
The Fizz set is neither a keyboard nor a full set of keycaps: 12 caps cover one area, not whole rows, and the rest of the keyboard keeps its original caps. It does not fit a membrane keyboard, low-profile keys or a proprietary stem. Despite its bright colours it is not backlit: PBT is opaque, the light passes around the keycap and draws a halo, it does not go through the pattern. Nor does it spare you from checking the profile of your current keycaps before mixing rows. Finally, this is artwork inspired by the League of Legends universe, not a licensed product.
What this set contains
Verified specifications · vérifié le
Ce qu’il fait bien
- 12 touches en PBT : le grain reste mat et sec sous le doigt
- Impression par sublimation (DYE-SUB) : le colorant est diffusé dans la matière, sans surépaisseur ni couche à écailler
- Profil OEM, le plus courant sur les claviers mécaniques du commerce : la hauteur reste alignée sur les rangées d'origine
- Tige croisée MX : compatible Cherry MX, Gateron, Kailh et Outemu
- Extracteur de keycaps fourni : pose et dépose à la main, opération réversible
Ce qu’il ne fait pas
- Ne remplace pas un clavier complet : 12 touches habillent une zone, les autres rangées gardent leurs capuchons d'origine
- Tailles fournies : 7 touches 1U (1,9 cm), une 1,25U, une Verr Maj 1,75U, une Retour arrière 2U, une Maj 2,75U (5,225 cm) et une barre d'espace 6,25U
- Claviers compacts 65 %, 75 %, 96 % et 98 touches : leur Maj droite est raccourcie à 1,75U ou 2,25U, la Maj 2,75U du set ne s'y monte pas. Les 7 touches 1U se posent sans difficulté
- Clavier AZERTY ISO : la touche 2U fournie correspond au Retour arrière, pas à la touche Entrée, qui est en L sur un clavier français
- Ne convient pas aux claviers à membrane, aux claviers à touches basses (low profile) ni aux switches à tige propriétaire
- Les légendes ne sont pas rétroéclairées : le PBT est opaque, la lumière du switch passe autour de la touche
- Le profil OEM ne s'aligne pas avec un clavier monté dans un autre profil (Cherry, SA, XDA, DSA) : une marche reste visible
- Création de fan art inspirée de l'univers League of Legends : ce set n'est pas un produit sous licence officielle
Voir toute la fiche technique+
Fabrication
- Matériau
- PBT
- Profil des touches
- OEM
- Impression
- Sublimation (DYE-SUB)
- Nombre de touches
- 12
Compatibilité
- Type de tige
- Tige croisée MX (Cherry MX, Gateron, Kailh, Outemu)
- Univers
- League of Legends — Fizz
Compatible avec
- Claviers mécaniques à tiges MX en croix
- Switches Cherry MX
- Switches Gateron
- Switches Kailh
- Switches Outemu
- Claviers montés au profil OEM
Dans la boîte
- 12 keycaps en PBT
- 1 extracteur de keycaps
Informations et sécurité
Consignes d'utilisation et informations légales du produit
Tapis et keycaps : bon usage
- Tapis : une légère odeur de caoutchouc peut être présente à l'ouverture. Elle disparaît en quelques jours à l'air libre.
- Tapis de sol : posez-le sur un sol propre et sec et vérifiez qu'il ne glisse pas.
- Keycaps : petites pièces, ne convient pas aux enfants de moins de 3 ans.
Origine, responsable et contact
- Produit et emballage d'origine fabricant : les inscriptions peuvent être en chinois ou en anglais. Les caractéristiques du produit sont décrites en français sur cette page.
- Utilisez ce produit uniquement pour l'usage décrit sur cette page, en suivant les consignes ci-dessous.
- Responsable de la mise sur le marché dans l'UE : JMR-Service (Fun-Esports). Pour ses coordonnées complètes, reportez-vous à nos CGV.
- Un problème de sécurité (surchauffe, odeur de brûlé, pièce cassée) ? Arrêtez d'utiliser le produit et écrivez-nous à contact@fun-esports.com.
- Garantie, retours et rétractation : voir notre page Garantie et retours.
Frequently Asked Questions
Does this set work on my keyboard?
It fits mechanical keyboards with an MX cross-stem: Cherry MX, Gateron, Kailh, Outemu. Pull off one keycap and look at the switch stem: if it forms a cross, the set clips onto it. On a membrane keyboard, on low-profile keys or on a proprietary stem, the caps will not hold.
Where do the 12 keycaps go when you play Fizz?
The set marks an area rather than dressing the whole keyboard: 12 keycaps for WASD, for the ability keys or for the row you use most. It is not a full set — the rest of the keyboard keeps its original caps, and the format (60%, TKL, full-size) does not come into it.
Can the pattern fade over time?
Printing is done by dye-sublimation (DYE-SUB): the dye is diffused into the plastic, not laid on the surface. So there is no layer to chip or wear. PBT also avoids the shine that appears on the most heavily used ABS keys.
Do these bright colours go with a black keyboard?
Contrast works in their favour: on a black case the Fizz caps stand out like an island, on a white keyboard they form a colourful row with no break. One thing to know: PBT is opaque, the switch light passes around the keycap and does not go through the pattern.
Do you need a tool to fit the keycaps?
A keycap puller is included in the box. It grips the cap by its sides and pulls it straight up, without touching the visible face. The new cap then goes on by hand, no glue and no soldering. The operation is reversible: your original caps go back on in a few minutes.
Is this an official League of Legends product?
No. This is an illustration inspired by the League of Legends universe, not a licensed product. The keycaps remain ordinary keyboard caps, independent of the game.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: key material, profile, stem type, number of keys, box contents. Many sets never make it into the catalogue.
A question about compatibility with your keyboard, a missing key, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to keyboards and keycaps: profiles, stems, materials.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min de lecture · publié le
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min de lecture · publié le
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min de lecture · publié le