Description complète
5X magnifier helping hand: the board holds itself while you solder
Resoldering a Game Boy save battery, replacing a swollen capacitor, repairing a torn-off trace: the problem is almost never the iron, it's holding the board, the wire and the iron with two hands. This FEITA TE-805 stand locks the part in adjustable crocodile clips and places a 5X magnifier right above the solder joint.
What it does
- 5X magnification: read silkscreen markings, spot a cold joint, line up a component leg without guessing.
- Adjustable crocodile clips: the board stays at the angle you want, both hands stay on the iron and the solder.
- Universal workbench tool: motherboard, controller, cable, connector — nothing to adapt, nothing to set up.
What it doesn't do
- It does not replace a micro-soldering microscope: 5X is fine for through-hole components and common SMD parts, not for BGA or 0201 packages.
- No lighting is advertised by the manufacturer for this model: plan for a workshop lamp.
- No soldering iron, solder, flux or desoldering braid in the box.
- The crocodile clips leave marks: put a piece of sleeving or cloth in between on a painted shell or fragile plastic.
- It is not a vice: it holds a board and small parts, not a whole console or a heavy item.
Compatibility
A workbench tool, independent of the machine: nothing plugs in, no electrical compatibility is involved. It holds a Game Boy Advance motherboard just as well as a PS1 drive, a controller harness, a connector or a cable to be resoldered. However, it is not sized to hold a complete console.
Skill level required
No assembly: the stand is used as is, and the arms are positioned by hand. It is, however, a soldering accessory and assumes you know how to handle an iron. You will need a temperature-controlled iron, solder, desoldering braid and the right screwdriver for your machine — tri-wing for vintage Nintendo handhelds, Torx for many controllers.
In the box
- 1 magnifier stand (5X) with articulated arms and crocodile clips
Read before ordering: Gaming accessories
Listing verified on 19 August 2026. Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
Helping hand with 5X magnifier for soldering — FEITA TE-805 crocodile clips
5X magnifier and crocodile clips: the third hand for your retro workbench.
En stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
Two hands on the iron
On a retro workbench, the hard part isn't the soldering: it's the geometry. A Game Boy board that slides, a 0.5 mm wire that moves, and the iron tip comes in at an angle. The crocodile clips hold the part still at the angle you choose, and the magnifier stays in place above the work point. Your two hands are left to do what they do best: the iron on one side, the solder on the other.
What 5X magnification changes
To the naked eye, a cold joint looks like a clean joint and a cracked trace looks like an intact one. At 5X, the difference jumps out: the dull ball of solder, the solder bridge between two legs, the capacitor marking you thought was unreadable. It's the useful magnification for through-hole components and common SMD parts in 8-bit and 16-bit consoles. Beyond that, for BGA, you need a stereo microscope — best to say so right away.
What we tell you before you buy
This product is a holding stand, not a complete workstation. Nothing that heats up is supplied: no iron, no solder, no flux. The manufacturer does not advertise any built-in lighting, so plan for an adjustable lamp. Finally, the clip jaws bite into plastic: on a painted shell, put a piece of sleeving or cloth in between. Listing verified on 19 August 2026.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- 5X magnification for traces and fine components
- Adjustable crocodile clips: both hands stay free
- Holds a board, cable or connector while you solder
- Universal tool, independent of the console
Ce qu’il ne fait pas
- Does not replace a microscope: 5X is not enough for BGA or 0201
- No lighting advertised by the manufacturer for this model
- No soldering iron, solder or flux supplied
- The crocodile clips can mark a painted shell or fragile plastic
- Does not hold a complete console or a heavy part
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Soldering tool
Compatible avec
- All retro consoles (workbench tool)
- Motherboards and printed circuit boards
- Controllers, cables and connectors
Dans la boîte
- 1 magnifier stand (5X) with articulated arms and crocodile clips
Frequently Asked Questions
🔧 Do I need to solder to use this stand?
No. The stand needs no assembly and no soldering: it holds the part while you solder. It is therefore intended for someone who already handles an iron.
🔍 What is the magnification of the magnifier?
5X. Enough to read silkscreen markings, spot a cold joint and line up a through-hole component or a common SMD part. Not enough for BGA or 0201 packages.
🎮 Which consoles is it compatible with?
All of them: it is a workbench tool, nothing plugs in. It holds a Game Boy Advance motherboard, a PS1 drive, a controller harness or a cable. It is not designed to hold a complete console.
📦 What's in the box?
1 magnifier stand (5X) with articulated arms and crocodile clips. No soldering consumables are supplied.
💡 Is there built-in lighting?
No lighting is advertised by the manufacturer for the TE-805 model. Plan for a workshop lamp or an adjustable desk lamp.
🧰 What other tools do I need?
A temperature-controlled soldering iron, solder, desoldering braid and the right screwdriver for your machine: tri-wing, Torx or Phillips depending on the model.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What guarantee applies?
2-year legal guarantee of conformity. 14-day returns. French customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le