Full description
3 V lithium coin cells: saves that hold again
A cartridge that forgets your progress every time you switch off, an internal clock that resets to zero, a console that loses its settings: nine times out of ten, the save battery is flat. These 3 V lithium coin cells cover the most common formats in retro hardware — CR1616, CR1620 and CR1632 — in packs of 5 or 10.
What it does
- Three formats to choose from: CR1616, CR1620 or CR1632, all 3 V lithium. The format is printed right on the original battery.
- Sold in packs: 5 or 10 batteries depending on the variant, enough to handle a whole shelf of cartridges in a single order.
- Lithium chemistry: stable 3 V voltage over time, low self-discharge; this is the chemistry originally used in SRAM save cartridges.
What it doesn't do
- These are bare batteries, without solder tabs. In a cartridge, the original battery is soldered in by two tabs: you need either tabbed batteries, a battery holder, or careful soldering — we supply neither tabs nor holder.
- They are not rechargeable and do not replace any Li-ion battery in a handheld console.
- Changing the battery erases the save stored in memory: the SRAM loses power during the operation. Back up whatever needs saving before opening the cartridge.
- A cartridge that no longer saves may also suffer from a broken trace or a dead chip: the battery only fixes the most common case, not all of them.
- No battery comes with a tool: the gamebit-type screwdriver and the soldering iron are not in the box.
Compatibility
What matters is the format, not the machine: order the reference printed on the battery you remove. The CR1616 is the most widespread format in battery-backed Game Boy, Game Boy Color and Game Boy Advance cartridges. The CR1620 and CR1632 are found in other 3 V boards and peripherals, as well as in watches, calculators and electronic toys. Not suitable for slots designed for a CR2025 or CR2032, which are wider: check before ordering.
Skill level required
Disassembly of the cartridge or casing, and most often soldering to reuse the original tabs. Have a screwdriver that fits the cartridge screw, a fine-tip soldering iron and solder ready. Never solder directly onto the body of a coin cell unless you know what you are doing: the heat can damage it.
In the box
- 5 or 10 lithium coin cells (3 V), in the chosen format (CR1616, CR1620 or CR1632).
Keep out of reach of children: swallowing a coin cell is a medical emergency. Do not puncture, heat or recharge. Take to a collection point at the end of its life.
Read before ordering: Workshop & modding
CR1616, CR1620, CR1632 3 V Lithium Coin Cells — Retro Save Batteries
CR1616, CR1620 and CR1632 3 V lithium coin cells — in packs of 5 or 10, to replace a save battery that has run out of steam.
In stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
The symptom, before the diagnosis
A cartridge that displays "save file corrupted" at startup, an internal clock that starts again from zero, settings that no longer stick from one session to the next: these three symptoms almost always point to the same part, a 3 V coin cell fitted twenty or thirty years ago. It has done its job far longer than intended. It can be replaced for a few euros, and the machine gets its memory back.
The right format, not the right brand
CR1616, CR1620, CR1632: the three middle digits give the diameter, the last two the thickness in tenths of a millimetre. A CR1632 is twice as thick as a CR1616 and will not fit in the same slot. That is why we sell all three formats on the same listing: the only thing to do before ordering is to read the reference engraved on the battery you remove.
What to plan for before ordering
A cartridge battery is not a remote-control battery: it is soldered in by two metal tabs. These batteries come bare, without tabs. So have a fine-tip soldering iron ready, or a battery holder to fit once and for all so that the next replacement can be done without tools. We tell you this before you buy rather than when you send it back: without soldering, the job cannot be done on a cartridge.
What this accessory brings
Verified manufacturer specifications · verified on
What it does well
- Three formats covered: CR1616, CR1620, CR1632
- 3 V lithium, stable voltage and low self-discharge
- Packs of 5 or 10 to handle several cartridges
- Inexpensive workshop consumable to keep in stock
What it doesn’t do
- Bare batteries, without solder tabs or battery holder
- Soldering needed on a save cartridge
- Replacement erases the save stored in memory
- Not rechargeable, single use
- Do not replace a CR2025 or CR2032
See full specifications+
Material and size
- Accessory type
- 3 V lithium coin cell
Compatible with
- Game Boy and Game Boy Color cartridges (CR1616 format)
- Battery-backed Game Boy Advance cartridges (CR1616 format)
- 3 V devices and electronic boards in CR1620 format
- 3 V devices and electronic boards in CR1632 format
- 3 V watches, calculators and electronic toys
In the box
- 5 or 10 lithium coin cells (3 V) depending on the variant
- Format of your choice: CR1616, CR1620 or CR1632
Information and safety
Instructions for use and legal information about the product
Button batteries: warning
Lithium button batteries and products containing them
DANGER – Keep batteries out of reach of children. Swallowing a button battery can cause severe internal burns, or even death, within 2 hours. If in doubt, see a doctor immediately or call your local emergency number (112 in the EU).
- Do not recharge these batteries. Do not short-circuit, heat or throw them into a fire.
- Keep new batteries in their original packaging.
- Observe the polarity (+) when installing.
- Used batteries: cover the terminals with adhesive tape and take them to a battery collection point.
Origin, responsible person and contact
- Product and packaging as supplied by the manufacturer: markings may be in Chinese or English. The product's characteristics are described on this page.
- Use this product only for the purpose described on this page and follow the instructions below.
- Person responsible for placing this product on the EU market: JMR-Service (Fun-Esports). See our Terms of Sale for full contact details.
- A safety problem (overheating, burning smell, broken part)? Stop using the product and write to us at contact@fun-esports.com.
- Warranty, returns and withdrawal: see our Warranty and returns page.
Frequently Asked Questions
🔋 Which format should I order?
The one printed on the battery you remove: CR1616, CR1620 or CR1632. All three are 3 V but they have neither the same diameter nor the same thickness, so they are not interchangeable.
🎮 Is this the right battery for a cartridge that no longer saves?
The CR1616 is the most common format in battery-backed Game Boy, Game Boy Color and Game Boy Advance cartridges. Open the cartridge and read the reference before ordering.
🔧 Do I need to solder?
Yes, in most cases: a cartridge's original battery is held in place by two soldered tabs. These batteries are bare, without tabs. You need to reuse the existing tabs or fit a battery holder.
💾 Will I lose my save?
Yes. Cutting power to the SRAM erases the game stored in memory. Transfer it or accept the loss before you start.
📦 What's in the box?
5 or 10 lithium coin cells (3 V) depending on the chosen variant, in the selected format. No tools, no battery holder, no tabs.
♻️ Are they rechargeable?
No. These are primary lithium batteries, for single use. Never attempt to recharge them. At the end of their life, take them to a collection point.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min read · published on
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min read · published on
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min read · published on


