Full description
Ahri's OEM profile, for hands that never leave the keyboard
In a ranked game that drags on, it is never the big flaws that wear you out: it is a key that feels too flat under your index finger, an edge that catches your nail, a finger that slips off WASD in the third hour. This set of 12 Ahri keycaps works on exactly that, since it uses the OEM profile: a height and angle that change from one row to the next instead of a uniform surface.
A different tilt, row by row
The OEM profile does not just raise the keys. Each row has its own height and slope, so the top row is angled slightly toward you while the bottom row stays more upright. Your wrist compensates less, your fingers land in the same place, and your eyes don't need to drop to the keyboard to check.
- Progressive height: the rows are not laid out flat, so your finger reaches the key without unnecessary stretching.
- Slightly dished top: your fingertip stays centered instead of sliding toward the edge of the key.
- Tactile reference: the step between two rows acts as a landmark when you play without looking.
A nine-tailed fox identity
The set uses the tones associated with Ahri: deep pink, magenta, mauve and pearly white, with motifs evoking the Vastaya's tails and the orbs she spins around her. On a black frame, the set really stands out; on a white keyboard, the whole thing takes on a more pastel look. If this color family appeals to you, the Syndra keycaps take purple somewhere darker, the LeBlanc keycaps revisit the pink and purple range in a cooler register, and the Kai'Sa keycaps offer a higher-contrast option for a setup that fully embraces purple.
Material, printing and installation
- Material: PBT, whose matte texture stays pleasant even after hours of play.
- DYE-SUB printing: the design is diffused into the material, not applied on the surface.
- Compatibility: MX cross stem, so Cherry MX, Gateron, Kailh and Outemu.
- Comes with: a keycap puller to remove your old keys without forcing.
Two questions before ordering
Do I need to change the whole keyboard to benefit from the OEM profile?
No. Many stock mechanical keyboards already ship with this profile: the 12 Ahri keys then sit in line with the existing rows, with no visible step.
Does comfort really change over a long session?
It is mostly about repetition: when each row guides your finger toward the center of the key, you correct your position less, and your hand tenses up less as the games go by.
Ahri League of Legends Keycaps – OEM Profile Built for Long Sessions
Ahri in pinks and magentas on twelve PBT keycaps: a warm island on the keyboard of the mid laner who plays game after game.
In stock
📦Delivery in 10 to 18 days · dispatched within 3 to 5 days.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷French customer service
reply within 1 business day - 🛡Legal warranty
2 years - ↩14 days
to change your mind - 🔒Secure payment
Card · PayPal · Klarna
Ahri, the fox of Ionia under your fingers
Ahri is the vastaya of Ionia: nine tails, an orb she throws and recalls, a silhouette you recognise from a single block of colour. The set picks up her pinks and magentas, softened with white and lifted by a discreet gold on the jewellery. It is a warm, decidedly light palette that drops a coloured island in the middle of ordinary stock keycaps: twelve keys are enough to change the mood of a desk without repainting it. It speaks to the mid laner who spends evenings on the same champion and wants to find him under the fingers, which is where the OEM profile matters — the one that does not throw the hand off after two hours of play.
OEM profile: keep every key on its own row
The profile is OEM, the one fitted as standard on most mechanical keyboards on the market: each row has its own height and angle. That is the only real precaution when fitting, because a key installed on the wrong row is felt straight away under the fingertip, and far more so after two hours. Beyond that, the keycaps are PBT, a harder and drier plastic than the original ABS, which does not take on the shine of heavily typed keys, and the artwork is dye-sublimated (DYE-SUB), the dye diffused into the material rather than laid on top. They clip onto any MX cross-stem (Cherry MX, Gateron, Kailh, Outemu), by hand, with the puller supplied, with no glue and no soldering.
What this Ahri set does not do
Twelve keys do not repaint a keyboard: they dress one area — WASD, the ability keys or a function row — and the rest keeps its stock keycaps. Nor is it a keyboard: you need one already, mechanical, with MX cross-stems, not membrane, not low profile, not a proprietary stem. It is not a backlit set either: PBT is opaque, the light from the switch travels around the key and draws a halo, it does not pass through the pink. And it is not a licensed product: the artwork is inspired by the League of Legends universe, with no connection to the game's publisher.
What this set contains
Verified specifications · vérifié le
Ce qu’il fait bien
- 12 touches en PBT : le grain reste mat et sec sous le doigt
- Impression par sublimation (DYE-SUB) : le colorant est diffusé dans la matière, sans surépaisseur ni couche à écailler
- Profil OEM, le plus courant sur les claviers mécaniques du commerce : la hauteur reste alignée sur les rangées d'origine
- Tige croisée MX : compatible Cherry MX, Gateron, Kailh et Outemu
- Extracteur de keycaps fourni : pose et dépose à la main, opération réversible
Ce qu’il ne fait pas
- Ne remplace pas un clavier complet : 12 touches habillent une zone, les autres rangées gardent leurs capuchons d'origine
- Tailles fournies : 7 touches 1U (1,9 cm), une 1,25U, une Verr Maj 1,75U, une Retour arrière 2U, une Maj 2,75U (5,225 cm) et une barre d'espace 6,25U
- Claviers compacts 65 %, 75 %, 96 % et 98 touches : leur Maj droite est raccourcie à 1,75U ou 2,25U, la Maj 2,75U du set ne s'y monte pas. Les 7 touches 1U se posent sans difficulté
- Clavier AZERTY ISO : la touche 2U fournie correspond au Retour arrière, pas à la touche Entrée, qui est en L sur un clavier français
- Ne convient pas aux claviers à membrane, aux claviers à touches basses (low profile) ni aux switches à tige propriétaire
- Les légendes ne sont pas rétroéclairées : le PBT est opaque, la lumière du switch passe autour de la touche
- Le profil OEM ne s'aligne pas avec un clavier monté dans un autre profil (Cherry, SA, XDA, DSA) : une marche reste visible
- Création de fan art inspirée de l'univers League of Legends : ce set n'est pas un produit sous licence officielle
Voir toute la fiche technique+
Fabrication
- Matériau
- PBT
- Profil des touches
- OEM
- Impression
- Sublimation (DYE-SUB)
- Nombre de touches
- 12
Compatibilité
- Type de tige
- Tige croisée MX (Cherry MX, Gateron, Kailh, Outemu)
- Univers
- League of Legends — Ahri
Compatible avec
- Claviers mécaniques à tiges MX en croix
- Switches Cherry MX
- Switches Gateron
- Switches Kailh
- Switches Outemu
- Claviers montés au profil OEM
Dans la boîte
- 12 keycaps en PBT
- 1 extracteur de keycaps
Informations et sécurité
Consignes d'utilisation et informations légales du produit
Tapis et keycaps : bon usage
- Tapis : une légère odeur de caoutchouc peut être présente à l'ouverture. Elle disparaît en quelques jours à l'air libre.
- Tapis de sol : posez-le sur un sol propre et sec et vérifiez qu'il ne glisse pas.
- Keycaps : petites pièces, ne convient pas aux enfants de moins de 3 ans.
Origine, responsable et contact
- Produit et emballage d'origine fabricant : les inscriptions peuvent être en chinois ou en anglais. Les caractéristiques du produit sont décrites en français sur cette page.
- Utilisez ce produit uniquement pour l'usage décrit sur cette page, en suivant les consignes ci-dessous.
- Responsable de la mise sur le marché dans l'UE : JMR-Service (Fun-Esports). Pour ses coordonnées complètes, reportez-vous à nos CGV.
- Un problème de sécurité (surchauffe, odeur de brûlé, pièce cassée) ? Arrêtez d'utiliser le produit et écrivez-nous à contact@fun-esports.com.
- Garantie, retours et rétractation : voir notre page Garantie et retours.
Frequently Asked Questions
Will this set fit my keyboard?
You need a mechanical keyboard with MX cross-stems: Cherry MX, Gateron, Kailh, Outemu. Lift one key and look at the switch stem; if it forms a cross, the keycaps clip straight on. On a membrane keyboard, on low profile keys or on a proprietary stem, there is nothing to be done.
What's in the box?
12 keycaps and a keycap puller. The keyboard format is irrelevant: 60 %, TKL or full size, it is always the same twelve caps, spread over the area of your choice, while the rest of the keyboard keeps its original keys.
Will the pink fade over time?
The artwork is dye-sublimated (DYE-SUB): the dye is diffused into the plastic, so there is no printed layer to wear away or chip off. PBT also resists the shine that appears on the most heavily used ABS keys, which matters on a light palette where any glossy patch would show.
Where should the twelve keys go if you play mid?
The most common layout dresses WASD and the ability keys, the ones the left hand never leaves during a mage game. That leaves a few caps for the function row or the item keys. Nothing is fixed, and the layout can be redone in two minutes.
Does the set work with an already colourful keyboard?
Ahri's palette is warm and light: pinks, magentas, white, a discreet gold. It sits well next to a black, grey or white keyboard, far less so next to caps already heavily saturated in another shade. If your keyboard is backlit, a static warm-toned light shows it off better than a multicolour cycle.
Is this an official League of Legends product?
No. This is an illustration inspired by the League of Legends universe and not a licensed product: no connection to the game's publisher. They are ordinary keyboard keycaps.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: key material, profile, stem type, number of keys, box contents. Many sets never make it into the catalogue.
A question about compatibility with your keyboard, a missing key, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to keyboards and keycaps: profiles, stems, materials.
Manette pour smartphone : bien choisir pour le rétro et les jeux mobiles
Trois formats de manettes pour téléphone, et les critères qui départagent : port USB-C, version d'iOS ou d'Android, longueur du téléphone avec sa coque,…
9 min de lecture · publié le
Quelle manette 8BitDo choisir selon votre console et votre usage
Récepteur pour console d'origine, SN30 Pro ou Pro 3 sur Switch, Ultimate 2C ou Ultimate 2 sur PC : le tableau usage par usage…
11 min de lecture · publié le
Leverless ou stick arcade en 2026 : faut-il passer à la hitbox ?
Vous hésitez à passer au leverless ? Fonctionnement, modes SOCD et règles de tournoi en 2026, jeux concernés, temps d'adaptation, switchs et cartes GP2040-CE,…
9 min de lecture · publié le



