Description complète
Workshop suction cup 55 mm: open a screen without marking the shell
Opening a handheld console or replacing a display almost always starts with the same risky move: sliding a blade under the glass and prying. This 55 mm suction cup tackles the problem the other way round — it pulls vertically on the smooth surface and creates the gap that the opening picks will then slip into. The result: fewer marks on the shell and less warped plastic.
What it does
- Vertical pull: the suction cup pulls the screen upwards instead of forcing against the edge of the shell, where the plastic breaks.
- 55 mm diameter: wide enough to hold on a handheld console display, a replacement screen or a phone's glass.
- One piece, reusable: nothing to assemble, nothing to adjust, no consumables to buy again after the job.
What it doesn't do
- It doesn't heat and doesn't dissolve adhesive: on a glued screen, you first need to soften the glue, otherwise the suction cup comes off.
- It won't hold on a matt, grainy, porous or perforated surface — textured shell, speaker grille, frosted plastic.
- It doesn't replace opening picks, spudgers or screwdrivers: it opens the gap, it doesn't take anything apart on its own.
- On glass that is already cracked, the suction can make the damage worse. Apply adhesive film to the screen before pulling.
Compatibility
Any smooth, flat, non-porous surface with at least 6 cm of clearance: displays of retro and modern handheld consoles, replacement screens supplied as kits, phone and tablet glass, glass or acrylic panels. Not suitable for matt or textured shells, perforated faces, or tightly curved surfaces, where no vacuum can form.
Skill level required
Beginner. No soldering, no cutting. Keep to hand a set of screwdrivers suited to the device (Phillips, tri-wing or Y depending on the model), opening picks or thin spudgers to release the clips once the gap is open, and a gentle heat source if the screen is held with adhesive.
In the box
- 1 removal suction cup, 55 mm, in the chosen colour.
Read before ordering: Gaming Accessories
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.
Workshop suction cup 55 mm — screen and shell removal
55 mm suction cup to open a screen or smooth shell without prying with a screwdriver.
En stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee of conformity · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
The technique: open without marking
Most shells damaged during a repair get damaged in the first ten seconds, when a screwdriver is slid under the glass to pry it up. The suction cup reverses the move: it sits in the centre of the smooth surface and pulls upwards, vertically, until a gap appears. That gap is where the opening picks then go in, without stressing the plastic. The edge of the shell is no longer used as a pivot, so it doesn't turn white or warp.
The tool: 55 mm, one single piece
A 55 mm diameter is the useful compromise for a retro workshop: wide enough to generate real suction on a handheld console display or a replacement screen, compact enough to sit on a phone's glass. The tool is one-piece, with no mechanism to adjust and no consumable parts, so it comes out of the drawer as often as needed. Five colours are available: they change nothing about the grip, only how easily you spot it in a toolbox.
The limit: what it won't do
A suction cup doesn't unstick anything on its own. On a screen held with adhesive, you first need to soften the glue, otherwise it comes off before the gap opens. It also needs a smooth, flat, non-porous surface: on a matt, textured or perforated shell, no vacuum forms and the tool slips. And on glass that is already cracked, the suction can spread the crack: it's better to apply adhesive film before pulling. We'd rather write it here than read it in a return.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- Vertical pull: avoids prying against the edge of the shell
- 55 mm diameter, suited to handheld console displays
- One piece, reusable, no consumables
- Ready to use straight away, no soldering or cutting
Ce qu’il ne fait pas
- Doesn't heat or dissolve adhesive: the glue must be softened first
- Won't hold on a matt, textured, porous or perforated surface
- Doesn't replace opening picks, spudgers or screwdrivers
- On cracked glass, the suction can make the damage worse
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Disassembly tool
Compatible avec
- Retro handheld consoles
- Replacement screens and displays
- Phones and tablets
- Any smooth, non-porous surface
Dans la boîte
- 1 removal suction cup, 55 mm (chosen colour)
Frequently Asked Questions
🔧 Do I need to solder to use this suction cup?
No. No soldering, no cutting: you place the suction cup on the smooth surface and pull vertically. It's a disassembly tool, not a part to install.
🎮 Which surfaces does it really hold on?
Any smooth, flat, non-porous surface with at least 6 cm of clearance: handheld console displays, replacement screens, phone and tablet glass, glass and acrylic. It won't hold on a matt, textured, perforated or strongly curved shell.
♨️ Do I need to heat the screen first?
If the screen is held with adhesive, yes: the glue must be softened with a gentle heat source, otherwise the suction cup comes off before opening the gap. The suction cup doesn't heat and doesn't dissolve any adhesive.
📦 What's in the box?
One removal suction cup, 55 mm, in the chosen colour. No other tools are supplied.
🧰 What other tools do I need?
A set of screwdrivers suited to the device (Phillips, tri-wing or Y depending on the model), opening picks or thin spudgers to release the clips once the gap is open, and something to heat gently if the screen is glued.
💥 What if my glass is already cracked?
The suction can spread the crack and pull off fragments. Apply a wide adhesive film over the whole surface before pulling, then work slowly.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ Which guarantee applies?
2-year legal guarantee of conformity. 14-day returns. Listing verified on 19 August 2026, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le