Description complète
MiSTer FPGA RTC board: the right date and time, even without a network
A MiSTer FPGA has no battery-backed clock: every time it's powered on, it starts with no date or time and waits for a network connection to provide them. On an offline setup, the Amiga, MSX, PC-XT or file browser end up with a bogus date. This RetroScaler RTC board adds a battery-powered clock that keeps running while the MiSTer is switched off, and that the system reads back at startup.
What it does
- Keeps time while powered off: the clock stays powered by a coin cell battery when the MiSTer is unplugged.
- Restores the date at startup: cores and saved files get a consistent timestamp, without going through Wi-Fi or Ethernet.
- Compact format: approximately 3.7 × 3.6 × 0.5 cm, designed to stay in a MiSTer case that's already well filled.
What it doesn't do
- Improves neither the performance nor the compatibility of cores: it's a clock, not an SDRAM board or a memory expansion.
- Doesn't replace a network connection: core and firmware updates still require the Internet.
- Doesn't work on its own: you need a MiSTer FPGA built on a Terasic DE10-Nano board, with an up-to-date MiSTer Main and RTC support enabled.
- Isn't a cartridge save battery: it doesn't restore the saves of a real Game Boy, Mega Drive or Super Nintendo cartridge.
- A coin cell battery isn't guaranteed to be in the box — have one ready.
Compatibility
Designed for a MiSTer FPGA built around the Terasic DE10-Nano board, via the expansion connector. It isn't intended for mini PCs and Android emulation boxes, retro handheld consoles or original consoles. Other development boards (DE10-Standard, DE1-SoC…) aren't covered. Check the space available in your case before ordering.
Skill level required
Installation for someone who has already opened their MiSTer: the board goes on the expansion connector, with the MiSTer switched off and unplugged, observing the pin orientation. The manufacturer mentions hand-soldered assembly, which describes how the board is made, not soldering you have to do at home. On the software side, the clock must be recognised by MiSTer Main; allow a few minutes of configuration after the first startup.
In the box
- 1 real-time clock RTC board for MiSTer FPGA (RetroScaler).
Read before ordering: Workshop & Modding
Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.
Real-time clock RTC board for MiSTer FPGA — RetroScaler
Battery-backed clock for MiSTer FPGA: the right date at startup, even without a network.
En stock
📦Ships within 3 to 5 business days · Delivery in 10 to 18 business days · 2-year legal guarantee · 14-day returns.
ℹÀ partir de 150 €, la livraison s’effectue en Point Relais.
- 🇫🇷SAV français
réponse sous 1 jour ouvré - 🛡Garantie légale
2 ans - ↩14 jours
pour changer d’avis - 🔒Paiement sécurisé
CB · PayPal · Klarna
Why a MiSTer loses track of time
The MiSTer FPGA recreates machines from the 80s and 90s using a DE10-Nano board, but it has no battery-backed clock. Unplugged, it forgets the date: at the next startup, newly created files carry a bogus timestamp and cores that display a calendar start from zero. On a networked setup, the time is fetched on the fly. On a MiSTer installed far from the router, in a living-room cabinet or an arcade machine, there's nothing to provide it.
A dedicated board, not a hack
RetroScaler makes this board for the DE10-Nano expansion connector, the size of a postage stamp: approximately 3.7 × 3.6 × 0.5 cm, small enough to stay in a MiSTer case already occupied by the SDRAM and cooling. A coin cell battery keeps the clock running when the console is powered off. Installation is done with the MiSTer unplugged, observing the pin orientation, and the clock must then be recognised by MiSTer Main.
What it won't fix
This board does only one thing: keep the time. It doesn't add memory, doesn't speed up any core and doesn't replace an SDRAM board. Firmware and core updates still require an Internet connection. It's not intended for original consoles either: it isn't a cartridge save battery. Finally, a coin cell battery isn't guaranteed to be in the box, so have one ready before installation.
What this accessory brings
Verified manufacturer specifications · vérifié le
Ce qu’il fait bien
- Keeps the date and time while the MiSTer is off
- No network connection needed for timestamps
- Compact format, approximately 3.7 × 3.6 × 0.5 cm
- Mounts on the DE10-Nano expansion connector
Ce qu’il ne fait pas
- Changes neither the performance nor the compatibility of cores
- Doesn't replace the network for updates
- Only for a MiSTer FPGA on a DE10-Nano board
- Not a cartridge save battery
- Coin cell battery not guaranteed to be in the box
Voir toute la fiche technique+
Matière et format
- Type d’accessoire
- Real-time clock (RTC) module
Compatible avec
- MiSTer FPGA
- Terasic DE10-Nano
Dans la boîte
- 1 real-time clock RTC board for MiSTer FPGA
Informations et sécurité
Consignes d'utilisation et informations légales du produit
Piles bouton : avertissement
Piles bouton lithium et produits qui en contiennent
DANGER – Tenez les piles hors de portée des enfants. Avaler une pile bouton peut provoquer des brûlures internes graves, voire la mort, en 2 heures. En cas de doute, consultez immédiatement un médecin ou appelez le 15 (112 depuis l'étranger).
- Ne rechargez pas ces piles. Ne les court-circuitez pas, ne les chauffez pas, ne les jetez pas au feu.
- Conservez les piles neuves dans leur emballage d'origine.
- Respectez la polarité (+) à l'installation.
- Piles usagées : isolez les bornes avec du ruban adhésif et déposez-les dans un point de collecte des piles.
Pièces détachées et modding : installation et sécurité
- Installation réalisée par l'utilisateur. Elle demande des compétences en démontage ou en électronique et peut annuler la garantie constructeur de la console d'origine.
- Éteignez l'appareil et retirez piles et batterie avant de l'ouvrir.
- Composants sensibles à l'électricité statique : touchez une surface métallique reliée à la terre ou portez un bracelet antistatique avant de les manipuler.
- Écrans et vitres : en cas de casse, le verre peut couper.
- Respectez la tension indiquée sur la fiche : une mauvaise alimentation détruit le module.
- Contient des petites pièces : ne convient pas aux enfants de moins de 3 ans.
Origine, responsable et contact
- Produit et emballage d'origine fabricant : les inscriptions peuvent être en chinois ou en anglais. Les caractéristiques du produit sont décrites en français sur cette page.
- Utilisez ce produit uniquement pour l'usage décrit sur cette page, en suivant les consignes ci-dessous.
- Responsable de la mise sur le marché dans l'UE : JMR-Service (Fun-Esports). Pour ses coordonnées complètes, reportez-vous à nos CGV.
- Un problème de sécurité (surchauffe, odeur de brûlé, pièce cassée) ? Arrêtez d'utiliser le produit et écrivez-nous à contact@fun-esports.com.
- Garantie, retours et rétractation : voir notre page Garantie et retours.
Frequently Asked Questions
🕹️ What is an RTC board for on a MiSTer FPGA?
It keeps the date and time while the MiSTer is powered off, then restores them at startup. Useful whenever the machine isn't connected to the network.
🎮 What hardware is it compatible with?
Only a MiSTer FPGA built on a Terasic DE10-Nano board, via its expansion connector. Not emulation mini PCs, retro handheld consoles or original consoles.
🔧 Do I need to solder to install it?
No, the board fits onto the expansion connector. The manufacturer's “hand soldering” label describes how the board is assembled at the factory, not work you have to do at home.
📦 What's in the box?
One real-time clock RTC board for MiSTer FPGA. A coin cell battery isn't guaranteed to be included: have one ready.
🌐 Can I do without the network once it's installed?
For the time, yes. Core and firmware updates still require an Internet connection.
⏱️ How long does installation take?
A few minutes for fitting, with the MiSTer unplugged, plus the time to check that MiSTer Main recognises the clock on restart.
🚚 What are the delivery times?
Delivery in 10 to 18 days, ships within 3 to 5 days.
🛡️ What warranty applies?
2-year legal guarantee of conformity. 14-day returns. French-speaking customer service, reply within 1 business day.
Why buy here rather than on a marketplace
It is a fair question. Here is the answer, straight.
Every listing is checked before publication: real compatibility, material, dimensions, box contents. Many models never make it into the catalogue.
A question about compatibility, a fit problem, a return: you write, a human replies within 1 business day. In French.
The 2-year legal warranty of conformity is handled by us — not by a form on the other side of the world. And 14 days to change your mind, with no need to justify yourself.
We do not claim to be the cheapest. We claim that you will know exactly what you are buying before you pay.
Read this before choosing
Our guides to accessories: compatibility, protection, transport.
Pixel art: create your own designs for a Divoom display
Grid size, number of colours, outlines, animation: the guide to getting started in pixel art and displaying your own creations on a Divoom display.
2 min de lecture · publié le
Divoom pixel art speakers: which one should you choose?
Astrotoo, Ditoo-Pro, FlowToo, Tiivoo-2, Timebox-Evo, MiniToo, Fairy-OK: the seven Divoom speakers compared, by use and budget.
2 min de lecture · publié le
Times Frame or Times Frame Pure: which Divoom floating photo frame should you choose?
64 or 32 GB, three colours or just one, a dial or not: the real differences between the Times Frame and Times Frame Pure…
1 min de lecture · publié le