{"title":"Workshop tools","description":"\u003cp\u003eWorkshop tools are there to hold, light, protect and clean during a repair. This page brings together ESD and anti-magnetic tweezers, precision flush cutters, antistatic silicone mats, helping hands with a magnetic base, the 5x LED magnifying lamp, the 1080p digital microscope, the air blower and the deburring kit.\u003c\/p\u003e","products":[{"product_id":"pate-thermique-12-4-w-console-pc","title":"Thermal paste 12.4 W\/m·K for consoles and PCs — 1 to 30 g syringe","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e12.4 W\/m·K thermal paste: restoring the contact between the chip and the heatsink\u003c\/h2\u003e\u003cp\u003eOn a console or PC more than three years old, the original thermal paste has dried out. It turns powdery, no longer carries heat to the heatsink, and the machine starts \u003cstrong style=\"color:#0097ac;\"\u003eoverheating\u003c\/strong\u003e: fan at full speed, \u003cstrong style=\"color:#0097ac;\"\u003ethrottling\u003c\/strong\u003e, shutdowns. This grey thermal grease is used to restore that contact on \u003cstrong style=\"color:#0097ac;\"\u003ereassembly\u003c\/strong\u003e, after disassembly or cleaning.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eStated conductivity of 12.4 W\/m·K\u003c\/strong\u003e: figure provided by the manufacturer, well above an entry-level paste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFive sizes\u003c\/strong\u003e: 1 g for a single chip, 4 g and 8 g for several machines, 15 g and 30 g for a workshop or a long-lasting supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine-tip syringe\u003c\/strong\u003e: controlled application in the centre of the die or the metal lid, without spilling onto neighbouring components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is not liquid metal.\u003c\/strong\u003e On a very hot bare chip, the temperature drop achieved is more modest than with a liquid alloy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt does not replace thermal pads.\u003c\/strong\u003e Thick pads (memory, power stages, contact plates) are replaced separately: a paste cannot fill a gap of several tenths of a millimetre.\u003c\/li\u003e\n\u003cli\u003eThe 12.4 W\/m·K figure is manufacturer data. We have not measured it in a laboratory ourselves.\u003c\/li\u003e\n\u003cli\u003eIt will not fix a clogged fan, a blocked heatsink or a worn solder joint: if the machine overheats for one of those reasons, the paste will make no difference.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer does not publish a detailed technical data sheet on the composition. Apply a thin layer and avoid any overflow onto the circuit board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eAny chip topped with a heatsink: home console APU (PS4, PS5, Xbox One, Xbox Series, Switch), retro handheld console SoC, desktop or laptop PC processor and graphics card. However, it is not suitable where the manufacturer has specified a thick pad, nor for factory-bonded heatsinks without paste. Disassembling a console still covered by the manufacturer's warranty voids that warranty.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eNo soldering. You need to disassemble the machine down to the heatsink, remove the old paste with isopropyl alcohol, let it dry, then apply a thin layer and reassemble to the correct torque. Have a suitable screwdriver set ready (security Torx on most home consoles, Phillips on a laptop), a spatula or a flexible card, and cleaning supplies. Count on an intermediate-level job: the application itself is simple, it is the disassembly that requires method.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 syringe of thermal paste — 1 g, 4 g, 8 g, 15 g or 30 g depending on the chosen variant.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeither a spatula nor an alcohol wipe is guaranteed by the supplier: plan to provide them yourself.\u003c\/p\u003e\u003cp\u003eProduct page checked on 19 August 2026.\u003c\/p\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"1 g \/ M12 (12.4 W\/m·K)","offer_id":54540424905037,"sku":"1005006894901387-1G-M12 12.4W-MK","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"15 g \/ M12 (12.4 W\/m·K)","offer_id":54540424937805,"sku":"1005006894901387-15g-M12 12.4W-MK","price":26.99,"currency_code":"EUR","in_stock":true},{"title":"30 g \/ M12 (12.4 W\/m·K)","offer_id":54540424970573,"sku":"1005006894901387-30g-M12 12.4W-MK","price":31.99,"currency_code":"EUR","in_stock":true},{"title":"4 g \/ M12 (12.4 W\/m·K)","offer_id":54540425003341,"sku":"1005006894901387-4G-M12 12.4W-MK","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"8 g \/ M12 (12.4 W\/m·K)","offer_id":54540425036109,"sku":"1005006894901387-8g-M12 12.4W-MK","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pate-thermique-12-4-w-m-k-pour-console-et-pc_fac079d6-c968-4666-972a-006f73a29720.png?v=1787318046"},{"product_id":"fraises-carbure-3-2-mm-outil-rotatif","title":"Carbide rotary burrs 3.2 mm — set of 10 for rotary tools","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eCarbide rotary burrs: touching up a shell without marking it\u003c\/h2\u003e\n\u003cp\u003eFitting an IPS screen, opening a path for a ribbon cable, widening a button cut-out or clearing space for a USB-C port: on a handheld console shell, the material to remove is measured in tenths of a millimetre. These ten \u003cstrong style=\"color:#0097ac;\"\u003etungsten carbide burrs\u003c\/strong\u003e fit any \u003cstrong style=\"color:#0097ac;\"\u003erotary tool with a 3.2 mm collet\u003c\/strong\u003e and replace the hand file, with a \u003cstrong style=\"color:#0097ac;\"\u003edouble cut\u003c\/strong\u003e that breaks up the chip instead of letting it curl.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTen different profiles\u003c\/strong\u003e: cylinder, ball, cone, flame, tree… depending on the shape, you enlarge a straight opening, round off a corner or hollow out a recess.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTungsten carbide\u003c\/strong\u003e: harder than high-speed steel, the burr keeps its cutting edge on shell ABS as well as on the aluminium or brass of a shield.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e3.2 mm (1\/8\") shank\u003c\/strong\u003e: the standard diameter for rotary tool collets, and a drill chuck takes it too.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt is not a straight-cutting tool: to open a clean screen window, a burr is used to finish the edge, not to cut the line. Use a template or a cut-off wheel.\u003c\/li\u003e\n  \u003cli\u003eNo burr can make up for a hand that moves too fast: on thin plastic, a pass with too much pressure melts the material instead of cutting it.\u003c\/li\u003e\n  \u003cli\u003eThe manufacturer is not identified (generic unbranded reference), and no depth stop is supplied: depth is judged by eye.\u003c\/li\u003e\n  \u003cli\u003eThis reference is not designed for hardened steel or stone.\u003c\/li\u003e\n  \u003cli\u003eWorkshop part sold on its own: no rotary tool, collet or sanding consumables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with any rotary tool accepting a \u003cstrong style=\"color:#0097ac;\"\u003e3.2 mm\u003c\/strong\u003e shank — the most common format on Dremel-type rotary tools and their equivalents — as well as with a chuck drill. Tools with a 2.35 mm collet (dental micromotors, fine engravers) do not accept them. Materials: ABS and polycarbonate shell plastics, wood, aluminium, brass, mild steel. No hardened steel, no glass, no ceramics.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo soldering. But the rotary tool spins fast and carbide removes material faster than you think: start at low speed, on a plastic offcut, before touching a shell. Safety glasses and a mask are essential, as ABS dust and metal chips are not harmless. Always secure the workpiece: a shell held by hand will fly off with the burr.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10 tungsten carbide rotary burrs, double cut, 3.2 mm shank, overall length 43 to 51 mm.\u003c\/li\u003e\n  \u003cli\u003eThe wooden storage stand advertised by the supplier is not guaranteed in every batch: do not count on it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Set of 10 — double cut \/ Round","offer_id":54540426281293,"sku":"1005007166631747-10PCS Double Cut-Round","price":22.99,"currency_code":"EUR","in_stock":true},{"title":"Set of 10 \/ Round","offer_id":54540426314061,"sku":"1005007166631747-10PCS set-Round","price":22.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/fraises-rotatives-carbure-3-2-mm_0d5da8b5-5226-4529-98eb-7d979e489850.png?v=1787318151"},{"product_id":"limes-aiguilles-diamantees-3x140-mm","title":"Set of 10 diamond needle files 3 x 140 mm — shell fitting","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eDiamond needle files: fitting a cut-out to a tenth of a millimetre\u003c\/h2\u003e\u003cp\u003eFitting an \u003cstrong style=\"color:#0097ac;\"\u003eIPS screen\u003c\/strong\u003e into an original shell, enlarging a button opening, reworking the edge of a 3D-printed part: these jobs come down to a fraction of a millimetre. This set of ten \u003cstrong style=\"color:#0097ac;\"\u003ediamond-grit\u003c\/strong\u003e files removes material slowly, without tearing the plastic. Overall length 140 mm, 3 mm body.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine fitting\u003c\/strong\u003e: opens up and trues a screen, button or port cut-out on a plastic shell, smoothly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDiamond grit\u003c\/strong\u003e: also cuts glass, ceramics, stone and hard metals, which the steel of a conventional file cannot work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eNeedle format\u003c\/strong\u003e: the 3 mm section gets into corners and between the internal ribs of a shell, where sandpaper cannot reach.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoes not replace a rotary tool: everything is done by hand, allow several minutes of work for one millimetre of plastic.\u003c\/li\u003e\n\u003cli\u003eDoes not leave a paint-ready surface: the medium grit leaves scratches, which need reworking with wet sandpaper from 800 grit upwards.\u003c\/li\u003e\n\u003cli\u003eNot suitable for soft, sticky materials — soft plastic, aluminium, lead, tin: they clog the diamond coating and glaze it permanently.\u003c\/li\u003e\n\u003cli\u003eThe supplier does not detail the mix of profiles in the set: we state ten 140 mm files, with no guarantee on the exact shapes supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eNo electronic constraints: this is a tool, not a spare part. It works on the ABS shells of handheld consoles (Game Boy Advance, Game Boy Color, PSP, DS Lite, Anbernic, Miyoo), 3D prints in PLA or PETG, the acrylic of an arcade panel, as well as metal, glass and stone. Avoid on aluminium and soft plastics, which clog the grit.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eBeginners welcome, no soldering. Secure the workpiece, work in short strokes always in the same direction, and check the fit often: material removed does not come back. A dust mask is recommended on glass and stone. A quick brush with a brass brush after use prevents the diamond coating from clogging.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e10 diamond needle files, 140 mm overall length\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Set of 10 \/ 140 mm","offer_id":54540426248525,"sku":"1005005256860271-10pcs-140mm","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/lot-de-10-limes-aiguilles-diamantees-3-x-140-mm_8e2da461-f0bb-409c-b47f-bd5bac72eaef.png?v=1787318199"},{"product_id":"plaque-acrylique-miroir-noire","title":"Black mirror acrylic sheet — modding, bartop and retro decor","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eBlack mirror acrylic sheet: the raw material for retro projects\u003c\/h2\u003e\u003cp\u003eThere comes a point in any modding project when the part you need isn't in the catalogue: a \u003cstrong style=\"color:#0097ac;\"\u003ebartop\u003c\/strong\u003e panel, a display case backing for a cartridge collection, a window cut into a shell, a protective plate under a console stand. This black \u003cstrong style=\"color:#0097ac;\"\u003emethacrylate (PMMA)\u003c\/strong\u003e sheet with a mirror face is made for exactly that: it is \u003cstrong style=\"color:#0097ac;\"\u003ematerial to cut\u003c\/strong\u003e, not a ready-to-fit part.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eBlack mirror face\u003c\/strong\u003e: a dark reflection that goes well with cabinet fronts, console stands and retro signage, where a silver mirror would clash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFour sizes, four thicknesses\u003c\/strong\u003e: 100x100, 150x150, 200x200 and 200x300 mm, in 2, 3, 4 or 5 mm. The 2 mm sheet bends and can be glued onto a backing; the 5 mm sheet is self-supporting and can be screwed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eWorks with common workshop tools\u003c\/strong\u003e: fine-tooth saw, acrylic cutter, file, drill at low speed. No specialist machine is needed for straight cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLighter and less brittle than glass\u003c\/strong\u003e: about half the weight at the same thickness, and it won't shatter into sharp shards if the project falls off the workbench.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is not a ready-to-use part.\u003c\/strong\u003e No pre-formed cut-outs, no holes, no adhesive: the sheet arrives rectangular and it's up to you to machine it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is not a screen protector.\u003c\/strong\u003e PMMA scratches much faster than tempered glass, and the mirror layer marks at the slightest dry rubbing. Do not use it in front of a handheld console screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is not compatible with any particular console.\u003c\/strong\u003e Nothing is pre-cut for a Game Boy, a cabinet or a specific case: it is a material, not a kit.\u003c\/li\u003e\n\u003cli\u003eThe mirror is decorative. Tinted black, it doesn't reflect an image as sharp or as bright as a glass mirror.\u003c\/li\u003e\n\u003cli\u003eAcrylic doesn't like heat: avoid placing it in direct contact with a power supply, a heatsink or an incandescent bulb.\u003c\/li\u003e\n\u003cli\u003eThe supplier documents neither the manufacturing process (cast or extruded), nor the thickness tolerance, nor the treatment of the second face.\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eStrictly speaking, none: it is a workshop consumable, not a console accessory. The uses tinkerers keep coming back to: side panels and marquee plate on a bartop or an arcade cabinet, back panel or shelf in a display case for cartridges and consoles, a window cut into a modified PC or console shell, a display base, an engraved or painted plate for games room signage. None of this is supplied cut to shape.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eDIY, no electronics. No soldering. Leave the protective film on while cutting and drilling: it is what prevents scratches. A fine-tooth saw or an acrylic cutter is enough for straight cuts; drill at low speed, with the sheet lying flat on a scrap of wood, otherwise the hole will chip. The edges can be finished with a file and then fine sandpaper. For assembly, use acrylic-specific glue or double-sided tape: ordinary cyanoacrylate leaves a white haze on acrylic.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 mm variants: 3 identical sheets.\u003c\/li\u003e\n\u003cli\u003e3, 4 and 5 mm variants: 1 sheet.\u003c\/li\u003e\n\u003cli\u003eFactory-applied protective film on the faces, to be removed after machining.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo template, screws or glue are supplied.\u003c\/p\u003e\u003cp\u003eListing checked on 19\/08\/2026.\u003c\/p\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"200 × 200 × 2 mm — pack of 3","offer_id":54540428542285,"sku":"1005008633722648-200x200x2mmx3pcs","price":28.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 300 × 2 mm — pack of 3","offer_id":54540428575053,"sku":"1005008633722648-200x300x2mmx3pcs","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"100 × 100 × 5 mm — 1 piece","offer_id":54540428607821,"sku":"1005008633722648-100x100x5mmx1pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 300 × 4 mm — 1 piece","offer_id":54540428640589,"sku":"1005008633722648-200x300x4mmx1pcs","price":27.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 200 × 4 mm — 1 piece","offer_id":54540428673357,"sku":"1005008633722648-200x200x4mmx1pcs","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 300 × 3 mm — 1 piece","offer_id":54540428706125,"sku":"1005008633722648-200x300x3mmx1pcs","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 200 × 3 mm — 1 piece","offer_id":54540428738893,"sku":"1005008633722648-200x200x3mmx1pcs","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"100 × 100 × 2 mm — pack of 3","offer_id":54540428771661,"sku":"1005008633722648-100x100x2mmx3pcs","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"150 × 150 × 3 mm — 1 piece","offer_id":54540428804429,"sku":"1005008633722648-150x150x3mmx1pcs","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"150 × 150 × 2 mm — pack of 3","offer_id":54540428837197,"sku":"1005008633722648-150x150x2mmx3pcs","price":25.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 300 × 5 mm — 1 piece","offer_id":54540428869965,"sku":"1005008633722648-200x300x5mmx1pcs","price":28.99,"currency_code":"EUR","in_stock":true},{"title":"200 × 200 × 5 mm — 1 piece","offer_id":54540428902733,"sku":"1005008633722648-200x200x5mmx1pcs","price":26.99,"currency_code":"EUR","in_stock":true},{"title":"150 × 150 × 5 mm — 1 piece","offer_id":54540428935501,"sku":"1005008633722648-150x150x5mmx1PCS","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/plaque-acrylique-miroir-noire_00dc2446-7841-4db5-b8a9-4085f2fb15d2.png?v=1787313343"},{"product_id":"flux-soudure-rma-223-seringue-10-cc","title":"RMA-223 solder flux in a 10 cc syringe — with needle","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eRMA-223 flux: the go-to choice for fine work on circuit boards\u003c\/h2\u003e\u003cp\u003eWithout flux, a rework joint doesn't take properly, the solder balls up and the pads stay hot for too long. \u003cstrong style=\"color:#0097ac;\"\u003eRMA-223\u003c\/strong\u003e is the flux most repair workshops use: a \u003cstrong style=\"color:#0097ac;\"\u003emildly activated rosin\u003c\/strong\u003e, it wets well without attacking the solder mask. Supplied in a \u003cstrong style=\"color:#0097ac;\"\u003e10 cc syringe with needle\u003c\/strong\u003e, so you can dose it precisely.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eInstant wetting\u003c\/strong\u003e: the solder spreads instead of beading, and rework holds first time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSyringe with needle\u003c\/strong\u003e: you apply it exactly where it's needed, without getting it everywhere.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eIron and hot air\u003c\/strong\u003e: suitable for soldering iron work as well as desoldering SMD components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt's not solder paste.\u003c\/strong\u003e Flux contains no solder: you need wire or paste alongside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need to clean up afterwards\u003c\/strong\u003e — with isopropyl alcohol. Rosin residue isn't corrosive, but it's sticky and attracts dust.\u003c\/li\u003e\n\u003cli\u003eIt doesn't replace a good iron tip: flux can't make up for an undersized iron.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eUniversal: console motherboards, power supplies, connectors, SMD components. Usable with a soldering iron or a hot air station.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eThis is a workshop consumable: it assumes you already solder. For a console recap or reworking a charging port, it's the product that makes the difference between a clean joint and a cold joint.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 syringe of RMA-223 flux, 10 cc\u003c\/li\u003e\n\u003cli\u003e1 dispensing needle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"D","offer_id":54540434669901,"sku":"1005007335370694-D","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"C","offer_id":54540434702669,"sku":"1005007335370694-C","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"B","offer_id":54540434735437,"sku":"1005007335370694-B","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"A","offer_id":54540434768205,"sku":"1005007335370694-A","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/flux-de-soudure-rma-223-en-seringue-10-cc_1114daf1-6306-4b62-a424-698a4e9ba427.png?v=1787313823"},{"product_id":"boule-nettoyage-panne-fer-a-souder","title":"Soldering iron tip cleaning ball — dry cleaning","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eTip cleaner: a clean tip without cooling down the iron\u003c\/h2\u003e\n\u003cp\u003eIn the middle of a motherboard recap or an IPS screen install, the tip gets coated in oxide and the solder stops flowing. A wet sponge, on the other hand, drops the temperature by more than a hundred degrees with every wipe and wears out the coating. This \u003cstrong style=\"color:#0097ac;\"\u003emetal wire ball\u003c\/strong\u003e cleans \u003cstrong style=\"color:#0097ac;\"\u003edry\u003c\/strong\u003e: dip the tip in, pull it out, and the iron is still at temperature.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDry cleaning\u003c\/strong\u003e: the metal wire scrapes off oxide and excess solder without thermal shock, unlike a damp sponge.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eContained residue\u003c\/strong\u003e: solder shavings fall into the metal base instead of ending up on the workbench or the board.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eReplaceable ball\u003c\/strong\u003e: when the wire is saturated with solder, you replace the ball and keep the base.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eNo consumables\u003c\/strong\u003e: no water to change, no sponge to dampen before each session.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt doesn't desolder anything. The supplier's original title mentions “desoldering”: that's wrong. To remove solder, you need a desoldering pump or wick.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't restore a tip that has already turned black. If the coating no longer takes solder, you need a tip tinner, not a cleaner.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't replace flux or solder, and doesn't clean a hot air station nozzle.\u003c\/li\u003e\n  \u003cli\u003eThe metal wire wears out: it becomes saturated with solder and is replaced like a consumable.\u003c\/li\u003e\n  \u003cli\u003eRubbing too hard scratches the coating of a low-end tip — dip, don't scrape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA passive accessory, independent of the iron's brand and wattage: it suits soldering irons with fine, conical or chisel tips, adjustable-temperature stations and cordless battery-powered irons. No connection, no electronics. However, it isn't designed for hot air nozzles or engraving tips.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. The accessory sits on the workbench and is ready to use straight away: dip the hot tip into the ball, move it back and forth twice, and re-tin with a little fresh solder before putting the iron back. Remember to empty the base when shavings build up.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 metal wire cleaning ball.\u003c\/li\u003e\n  \u003cli\u003e1 metal base, depending on the variant chosen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"As shown in photo 1","offer_id":54540434932045,"sku":"1005006994606576-As shown1","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"As shown in photo 2","offer_id":54540434964813,"sku":"1005006994606576-As shown2","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"As shown in photo 3","offer_id":54540434997581,"sku":"1005006994606576-As shown3","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/boule-de-nettoyage-pour-panne-de-fer-a-souder_e2d43e78-8028-4b36-80df-86a1d6bb719c.png?v=1787318692"},{"product_id":"papier-abrasif-eau-grain-60-a-20000","title":"Wet sandpaper — pack of 2 sheets, choice of grit from 60 to 20000","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eWet sandpaper: erase thirty years of scratches from a shell\u003c\/h2\u003e\u003cp\u003eA scratched console shell can be saved, as long as you work through the grits progressively. You tackle the scratch with a medium grit, then move up to very fine before polishing. This \u003cstrong style=\"color:#0097ac;\"\u003ewet and dry\u003c\/strong\u003e paper comes in \u003cstrong style=\"color:#0097ac;\"\u003e29 grits, from 60 to 20000\u003c\/strong\u003e — you choose the one you need.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUsed with water\u003c\/strong\u003e: wet sanding prevents the plastic from heating up and clogs the paper less.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e29 grits available\u003c\/strong\u003e: from 60 for rough work to 20000 to prepare for polishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFlexible backing\u003c\/strong\u003e: follows the curves of a console shell.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt's not a multi-grit kit.\u003c\/strong\u003e Each item contains \u003cstrong\u003e2 sheets of a single grit\u003c\/strong\u003e: for a full restoration, you need to order several grits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSanding alone doesn't restore the shine\u003c\/strong\u003e: you have to finish with polish, otherwise the surface stays matte.\u003c\/li\u003e\n\u003cli\u003eOn yellowed plastic, sanding doesn't remove the yellowing, which runs through the material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eAny plastic shell: Game Boy, PlayStation, controllers, console cases. Also usable on metal and wood.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eAccessible, but it takes patience. The habit to adopt: never skip more than two grit steps at once, otherwise the scratches from the previous grit remain visible after polishing.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2 sheets of sandpaper in the chosen grit\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Pack of 2 \/ 150","offer_id":54540438798669,"sku":"1005005202225183-2 PCS-150.","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 10000","offer_id":54540438831437,"sku":"1005005202225183-2 PCS-10000","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 5000","offer_id":54540438864205,"sku":"1005005202225183-2 PCS-5000","price":16.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 12000","offer_id":54540438896973,"sku":"1005005202225183-2 PCS-12000","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 20000","offer_id":54540438929741,"sku":"1005005202225183-2 PCS-20000","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 500","offer_id":54540438962509,"sku":"1005005202225183-2 PCS-500","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 220","offer_id":54540438995277,"sku":"1005005202225183-2 PCS-220","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 4000","offer_id":54540439028045,"sku":"1005005202225183-2 PCS-4000","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 60","offer_id":54540439060813,"sku":"1005005202225183-2 PCS-60","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 280","offer_id":54540439093581,"sku":"1005005202225183-2 PCS-280","price":16.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 360","offer_id":54540439126349,"sku":"1005005202225183-2 PCS-360","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 8000","offer_id":54540439159117,"sku":"1005005202225183-2 PCS-8000","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 6000","offer_id":54540439191885,"sku":"1005005202225183-2 PCS-6000","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 100","offer_id":54540439224653,"sku":"1005005202225183-2 PCS-100","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 1200","offer_id":54540439257421,"sku":"1005005202225183-2 PCS-1200","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 1000","offer_id":54540439290189,"sku":"1005005202225183-2 PCS-1000","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 800","offer_id":54540439322957,"sku":"1005005202225183-2 PCS-800","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 600","offer_id":54540439355725,"sku":"1005005202225183-2 PCS-600","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 3000","offer_id":54540439388493,"sku":"1005005202225183-2 PCS-3000","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 2500","offer_id":54540439421261,"sku":"1005005202225183-2 PCS-2500","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 2000","offer_id":54540439454029,"sku":"1005005202225183-2 PCS-2000","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 1500","offer_id":54540439486797,"sku":"1005005202225183-2 PCS-1500","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 180","offer_id":54540439519565,"sku":"1005005202225183-2 PCS-180","price":15.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 120","offer_id":54540439552333,"sku":"1005005202225183-2 PCS-120","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 80","offer_id":54540439585101,"sku":"1005005202225183-2 PCS-80","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 400","offer_id":54540439617869,"sku":"1005005202225183-2 PCS-400","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 320","offer_id":54540439650637,"sku":"1005005202225183-2 PCS-320","price":16.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 240","offer_id":54540439683405,"sku":"1005005202225183-2 PCS-240","price":16.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 2 \/ 7000","offer_id":54540439716173,"sku":"1005005202225183-2 PCS-7000","price":17.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/papier-abrasif-a-l-eau_8bf36e18-7ae0-4fe8-b90b-124bee233f5d.png?v=1787313962"},{"product_id":"bracelet-antistatique-esd-reglable","title":"Adjustable ESD anti-static wrist strap — 1.8 m grounding cord","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eESD anti-static wrist strap: the motherboard survives the teardown\u003c\/h2\u003e\u003cp\u003eA retro console doesn't always die at the soldering iron. It often dies from an invisible \u003cstrong style=\"color:#0097ac;\"\u003eelectrostatic discharge\u003c\/strong\u003e, picked up by touching a chip after walking across a carpet. This strap connects your wrist to a \u003cstrong style=\"color:#0097ac;\"\u003eground\u003c\/strong\u003e point via a 1.8 m cord and continuously drains the charge for as long as you're handling the board.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eContinuous discharge\u003c\/strong\u003e: the charge built up by your body goes to ground instead of passing through a component when you touch it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e1.8 m cord\u003c\/strong\u003e: long enough to keep your arms free above a workbench without unplugging with every movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAdjustable strap\u003c\/strong\u003e: tightens to any wrist size; contact with the skin must stay firm for the circuit to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUseful everywhere\u003c\/strong\u003e: IPS screen, FFC ribbon cable, memory chip, console or PC motherboard — sensitive parts aren't specific to one machine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt doesn't protect against electric shock. It's not safety equipment: never wear it while working on a device plugged into the mains or on an open power supply.\u003c\/li\u003e\n\u003cli\u003eIt's useless without a ground point. The cord must be connected to a real ground — an earthed metal chassis, an ESD mat, a workstation's earth terminal. Left hanging, it drains nothing.\u003c\/li\u003e\n\u003cli\u003eIt doesn't replace an anti-static mat, or ESD bags for storing a board after disassembly.\u003c\/li\u003e\n\u003cli\u003eIt doesn't repair anything: a chip already damaged by a past discharge won't come back.\u003c\/li\u003e\n\u003cli\u003eThe supplier doesn't state any ESD standard or built-in safety resistor value. We therefore don't claim one, and we advise against any use near mains voltage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eNo model restrictions: it's a tool, not a spare part. It's suitable for every open-case job — Game Boy, Game Boy Advance, DS, PSP, PS1, PS2, Dreamcast, Anbernic or Miyoo handheld consoles, PC motherboards, IPS screens and ribbon cables. It doesn't plug into any console port: it connects to a ground in your workshop, not to the machine being repaired.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eBeginners welcome, no soldering. Tighten the strap directly against the skin of your wrist, never over a sleeve, then connect the cord to a reliable ground before opening the console. Make sure the device being repaired is unplugged and, on home consoles, that the power supply capacitors are discharged. Have an anti-static mat and ESD bags on hand for disassembled boards.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 adjustable anti-static wrist strap, 1.8 m grounding cord\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Default Title","offer_id":54540439748941,"sku":"1005008554507702-Default Title","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/bracelet-antistatique-esd-reglable_788e11a5-9343-46ec-bba1-1067104f14d7.png?v=1787314069"},{"product_id":"tapis-soudure-silicone-magnetique-antistatique","title":"Magnetic silicone soldering mat — anti-static, 14 sizes","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eMagnetic silicone soldering mat: no more screws rolling under the furniture\u003c\/h2\u003e\u003cp\u003eTwo problems come up every time you take something apart: screws that get away, and a table that gets caught by the iron. This mat solves both — \u003cstrong style=\"color:#0097ac;\"\u003emagnetic compartments\u003c\/strong\u003e for screws and small hardware, \u003cstrong style=\"color:#0097ac;\"\u003esilicone that withstands 500 °C\u003c\/strong\u003e so you can put the iron down without thinking. It is also \u003cstrong style=\"color:#0097ac;\"\u003eanti-static\u003c\/strong\u003e, which matters as soon as you handle a motherboard.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMagnetic compartments\u003c\/strong\u003e: screws stay where you put them, even if the mat moves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eHeat-resistant\u003c\/strong\u003e: up to 500 °C, the soldering iron tip leaves no mark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAnti-static\u003c\/strong\u003e: reduces discharges onto sensitive components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e14 sizes\u003c\/strong\u003e, from 280×200 mm for a corner of your desk to 550×350 mm for a proper workbench.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-static does not mean grounded.\u003c\/strong\u003e The mat limits charge build-up but does not drain it away: for serious motherboard work, add an ESD wrist strap connected to earth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe magnets are in the compartments\u003c\/strong\u003e, not across the whole surface: a screw placed in the middle of the mat will still roll.\u003c\/li\u003e\n\u003cli\u003eDoes not replace a soldering iron stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eUniversal workshop equipment. Useful for any console, controller or phone repair.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eNone. It's the first thing to buy once you start taking things apart regularly: it prevents lost screws, which always cost more than the mat.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 silicone repair mat, in the size you chose\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"S150 — 390 × 270 mm","offer_id":54540441518413,"sku":"1005008040032049-S150  390 X 270mm","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"S170 — 480 × 318 mm","offer_id":54540441551181,"sku":"1005008040032049-S170  480 X 318mm","price":56.99,"currency_code":"EUR","in_stock":true},{"title":"S110 — 280 × 200 mm","offer_id":54540441583949,"sku":"1005008040032049-S110  280 X 200mm","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"S120B — 230 × 340 mm","offer_id":54540441616717,"sku":"1005008040032049-S120B  230 X 340mm","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"S504 — 350 × 250 mm","offer_id":54540441649485,"sku":"1005008040032049-S504 350 X 250mm","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"S508 — 480 × 340 mm","offer_id":54540441682253,"sku":"1005008040032049-S508  480 X 340mm","price":31.99,"currency_code":"EUR","in_stock":true},{"title":"C160 — 300 × 200 mm","offer_id":54540441715021,"sku":"1005008040032049-C160 300 X 200mm","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"S336 — 320 × 230 mm","offer_id":54540441747789,"sku":"1005008040032049-S336 320 X 230mm","price":25.99,"currency_code":"EUR","in_stock":true},{"title":"S335 — 450 × 300 mm","offer_id":54540441780557,"sku":"1005008040032049-S335 450 X 300mm","price":30.99,"currency_code":"EUR","in_stock":true},{"title":"S130 — 350 × 250 mm","offer_id":54540441813325,"sku":"1005008040032049-S130 350 X 250mm","price":25.99,"currency_code":"EUR","in_stock":true},{"title":"S120 — 340 × 230 mm","offer_id":54540441846093,"sku":"1005008040032049-S120 340 X 230mm","price":22.99,"currency_code":"EUR","in_stock":true},{"title":"S140 — 350 × 250 mm","offer_id":54540441878861,"sku":"1005008040032049-S140 350 X 250mm","price":30.99,"currency_code":"EUR","in_stock":true},{"title":"S180 — 550 × 350 mm","offer_id":54540441911629,"sku":"1005008040032049-S180  550 X 350mm","price":70.99,"currency_code":"EUR","in_stock":true},{"title":"TE-603 — 450 × 300 mm","offer_id":54540441944397,"sku":"1005008040032049-TE-603 450 X 300mm","price":32.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/tapis-de-soudure-silicone-magnetique_7f293192-7693-479d-8c6d-d2884824ab93.png?v=1787318736"},{"product_id":"arbre-flexible-300-mm-embouts-6-35","title":"300 mm flexible shaft for 6.35 mm bits — angled screwdriving","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e300 mm flexible shaft: reach the screw your screwdriver can't see\u003c\/h2\u003e\n\u003cp\u003eBuilding an arcade cabinet, closing up a bartop, screwing a control panel or a piece of setup furniture back together: there's always one screw stuck behind a crossbar, where no straight handle can fit. This \u003cstrong style=\"color:#0097ac;\"\u003e300 mm flexible shaft\u003c\/strong\u003e bends between the tool and the screw and transmits the turning force at an angle. It takes \u003cstrong style=\"color:#0097ac;\"\u003e6.35 mm hex bits\u003c\/strong\u003e (1\/4 inch), the standard for everyday tools.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAngled screwdriving\u003c\/strong\u003e: the sheath bends around an obstacle to reach a screw you can't get at head-on.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e300 mm extension\u003c\/strong\u003e: gives you extra reach inside an arcade cabinet, a closed unit or the back of a rack.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e6.35 mm standard\u003c\/strong\u003e: fits a bit holder handle, a ratchet or the chuck of an electric screwdriver, and takes standard 1\/4-inch hex bits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCarbon steel\u003c\/strong\u003e: metal core, silver finish, 300 mm long.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt's not a precision tool: handheld console shell screws (PH00 Phillips, tri-wing, Y) are removed with 4 mm bits and a precision screwdriver, not with a 6.35 mm extension.\u003c\/li\u003e\n  \u003cli\u003eNo bits are included: the extension on its own won't drive anything.\u003c\/li\u003e\n  \u003cli\u003eA flexible shaft loses torque in the bend and doesn't cope well with forceful screwing. Keep it for moderate tightening, not for drilling or freeing a seized screw.\u003c\/li\u003e\n  \u003cli\u003eNo screwdriver or handle in the box: you need to already own the tool that drives it.\u003c\/li\u003e\n  \u003cli\u003eThe manufacturer is not identified at source (generic 300 mm silver reference): we don't state a maximum torque or a minimum bend radius.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with any bit with a 6.35 mm (1\/4 inch) hex shank, the standard for screwdriver bits and bit holder handles. On the drive side, it fits into a drill driver chuck, a bit holder handle or a ratchet fitted with a 6.35 mm bit holder. \u003cstrong style=\"color:#0097ac;\"\u003eNot compatible\u003c\/strong\u003e with 4 mm precision bits and fine electronics screwdrivers — so not suitable for opening a handheld console or a controller.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo particular skills: insert the bit on one end, drive from the other. Good habit: hold the sheath with one hand so it doesn't whip around, and keep the speed low if you use it on an electric screwdriver. For taking a console apart, use a precision screwdriver kit instead.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 flexible shaft, 300 mm, 6.35 mm hex, carbon steel, silver finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming Accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Silver — 300 mm","offer_id":54540443615565,"sku":"1005007009808846-Silver 300mm","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/arbre-flexible-300-mm-pour-embouts-6-35-mm_ac1a41a1-dde1-4d4f-8fc6-bdca04f1e0b1.png?v=1787318782"},{"product_id":"mini-outil-rotatif-sans-fil-3-6-v","title":"Cordless 3.6 V rotary mini tool — shell cutting and sanding","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eCordless rotary mini tool: shell touch-ups without a workbench\u003c\/h2\u003e\n\u003cp\u003eFitting an \u003cstrong style=\"color:#0097ac;\"\u003eIPS screen\u003c\/strong\u003e in a handheld console almost always means enlarging the shell window, deburring an edge or clearing a tab. This rotary tool runs on a built-in \u003cstrong style=\"color:#0097ac;\"\u003e3.6 V battery\u003c\/strong\u003e, charges via \u003cstrong style=\"color:#0097ac;\"\u003eUSB\u003c\/strong\u003e and sits in your hand like a pen: you work the part on the corner of a table, not on a workbench.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eShell touch-ups\u003c\/strong\u003e: enlarge a screen opening, tidy up a cut edge, deburr ABS plastic after using a craft knife.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCordless\u003c\/strong\u003e: built-in battery and USB cable charging, no mains adapter or extension lead to drag to your work surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eVersatile\u003c\/strong\u003e: light drilling, sanding, brushing and polishing depending on the accessory fitted, on plastic, wood, resin and soft metals.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFour options\u003c\/strong\u003e: tool only, or a kit of 24, 75 or 361 accessories depending on what you already have in your toolbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt's not a straight-cutting tool: to open a screen window cleanly, you mark and cut with a craft knife or template; the rotary tool is only for finishing and deburring.\u003c\/li\u003e\n  \u003cli\u003e3.6 V brushed motor: limited torque, designed for plastic and soft materials. It won't drill steel and doesn't replace a bench drill.\u003c\/li\u003e\n  \u003cli\u003eDoesn't replace a soldering iron: no electronics work is possible with this tool.\u003c\/li\u003e\n  \u003cli\u003eThe manufacturer doesn't publish the piece-by-piece contents of the 24, 75 and 361-accessory kits, or the exact rotation speed: we don't list them rather than make them up.\u003c\/li\u003e\n  \u003cli\u003eNo variable speed setting is advertised by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eGeneric tool: it doesn't connect to any console, it works the material. Common uses in the retro workshop — shells for \u003cstrong style=\"color:#0097ac;\"\u003eGame Boy Advance\u003c\/strong\u003e, Game Boy Advance SP, Game Boy Color, PSP, Nintendo DS, Anbernic or Retroid handheld console shells, ABS sheets, wood, resin and soft metals. It is not suitable for steel, stainless steel or tempered glass.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo soldering. The technique, however, takes practice: a rotary tool removes material fast and there's no going back. Always try it out on a spare shell before touching the part you want to keep. Wear safety glasses and a dust mask, and use a clamp or a light vice to hold the shell — a part held in your hand will slip. Work in short passes: ABS melts if you stay in the same spot.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 cordless 3.6 V rotary mini tool, built-in battery included\u003c\/li\u003e\n  \u003cli\u003e1 USB charging cable\u003c\/li\u003e\n  \u003cli\u003eDepending on the variant chosen: no accessories (tool only), or a kit of 24, 75 or 361 accessories (burrs, discs, sanding and polishing bits)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"With 361 pieces","offer_id":54540443681101,"sku":"1005007805540867-with 361pcs","price":46.99,"currency_code":"EUR","in_stock":true},{"title":"With 75 pieces","offer_id":54540443713869,"sku":"1005007805540867-with 75pcs","price":34.99,"currency_code":"EUR","in_stock":true},{"title":"Tool only","offer_id":54540443746637,"sku":"1005007805540867-only drill","price":26.99,"currency_code":"EUR","in_stock":true},{"title":"With 24 pieces","offer_id":54540443779405,"sku":"1005007805540867-with 24pcs","price":28.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/mini-outil-rotatif-sans-fil-3-6-v_d36e2674-26e9-455d-9db3-737481d10483.png?v=1787314274"},{"product_id":"sacoche-outils-atelier-oxford-1680d","title":"Workshop tool bag — 1680D Oxford fabric, 6 sizes","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eTool bag: all your modding tools in a single bag\u003c\/h2\u003e\n\u003cp\u003eOpening a Game Boy Advance or a PS1 takes few tools, but always the same ones: tri-wing screwdrivers, spudgers, tweezers, bags of screws. Between sessions, they end up scattered in a drawer. This \u003cstrong style=\"color:#0097ac;\"\u003e1680D Oxford fabric\u003c\/strong\u003e bag, originally designed for electricians, gathers them in a \u003cstrong style=\"color:#0097ac;\"\u003emulti-pocket\u003c\/strong\u003e container you can take to a friend's place or to a \u003cstrong style=\"color:#0097ac;\"\u003eretro LAN party\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e1680D Oxford fabric\u003c\/strong\u003e: a dense weave, designed to withstand screwdriver tips and the sharp edges of side cutters without getting punctured on the first trip.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCompartmentalised storage\u003c\/strong\u003e: each tool has its own slot, so you don't have to empty the bag to find a 1.5 mm tri-wing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSix references to choose from\u003c\/strong\u003e: the manufacturer AIRAJ offers the bag in six sizes with different capacities, from a repair-kit bag to a workbench model. The reference you choose is shown when you order.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe bag is delivered \u003cstrong\u003eempty\u003c\/strong\u003e: no screwdrivers, spudgers or spare parts are supplied.\u003c\/li\u003e\n  \u003cli\u003eThe manufacturer describes the fabric as water-repellent: it can handle a splash, but not immersion or driving rain.\u003c\/li\u003e\n  \u003cli\u003eThe exact dimensions and number of pockets are not given for each reference. We won't display them until they're confirmed — don't order this bag to fit a specific tool down to the millimetre.\u003c\/li\u003e\n  \u003cli\u003eNo pre-cut foam, no anti-static compartment: to carry a motherboard or a chip, use a separate ESD bag.\u003c\/li\u003e\n  \u003cli\u003eIt isn't a hard case: nothing cushions a direct impact, and a bare console isn't protected in it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe bag isn't tied to any machine: it holds the tools used on Game Boy, Game Boy Advance, DS, PSP, PS1, PS2, Dreamcast or Android handheld consoles. However, it isn't sized for a soldering station, an oscilloscope or a bench power supply, which stay on the workbench.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. Nothing to assemble, solder or cut: the bag is ready to use straight out of the box. If you're looking for something to fill it with, see the \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/support-rangement\" style=\"color:#0097ac;\"\u003eStands \u0026amp; Storage\u003c\/a\u003e collection.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 tool bag in 1680D Oxford fabric, in the selected reference.\u003c\/li\u003e\n  \u003cli\u003eNo tools, no paper instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/support-rangement\" style=\"color:#0097ac;\"\u003eStands \u0026amp; Storage\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"3614","offer_id":54540455838029,"sku":"1005005784812202-3614","price":38.99,"currency_code":"EUR","in_stock":true},{"title":"3415","offer_id":54540455870797,"sku":"1005005784812202-3415","price":42.99,"currency_code":"EUR","in_stock":true},{"title":"3315","offer_id":54540455903565,"sku":"1005005784812202-3315","price":41.99,"currency_code":"EUR","in_stock":true},{"title":"3212","offer_id":54540455936333,"sku":"1005005784812202-3212","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"3214","offer_id":54540455969101,"sku":"1005005784812202-3214","price":30.99,"currency_code":"EUR","in_stock":true},{"title":"3215","offer_id":54540456001869,"sku":"1005005784812202-3215","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/sacoche-a-outils-d-atelier_59b3cc19-5531-4894-a3a9-92a7107a6669.png?v=1787313740"},{"product_id":"pompe-a-dessouder-367d","title":"367D desoldering pump — remove molten solder in one go","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e367D desoldering pump: remove solder without lifting the pad\u003c\/h2\u003e\n\u003cp\u003eOn a retro console board, desoldering is a matter of seconds: you heat the joint, then clear the solder before it sets. Without suction, you keep at it, heat for too long and \u003cstrong style=\"color:#0097ac;\"\u003elift the pad\u003c\/strong\u003e or \u003cstrong style=\"color:#0097ac;\"\u003epull up a trace\u003c\/strong\u003e. This manual pump sucks up \u003cstrong style=\"color:#0097ac;\"\u003emolten solder\u003c\/strong\u003e in a single stroke of the plunger, on a console board, a controller or an arcade PCB.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eInstant suction\u003c\/strong\u003e: plunger cocked by hand and released with a push button, the molten solder goes into the body of the pump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eThrough-hole components\u003c\/strong\u003e: capacitors, connectors, crystals, power sockets, jack ports — everyday parts on a console or controller board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eNo consumables\u003c\/strong\u003e: unlike desoldering braid, the pump can be reused without refills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt doesn't heat. The supplier's original product name calls it a “solder gun”: it is a manual vacuum pump, and a soldering iron is still essential.\u003c\/li\u003e\n\u003cli\u003eIt comes on its own: no iron, no solder, no desoldering braid.\u003c\/li\u003e\n\u003cli\u003eOn a multilayer board with a large ground plane, a single stroke often leaves solder in the hole. You need to reheat and try again, or finish with braid.\u003c\/li\u003e\n\u003cli\u003eIt is not suitable for desoldering fine SMD parts (QFP, BGA) or glued ribbon cables: these packages require a hot air station.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eUniversal tool for soldering work: it works on any board with through-hole components, whatever the machine — handheld and home console motherboards, controllers, arcade PCBs, video adapters, power supplies. However, it is not suited to all-SMD repairs, which are handled with hot air or braid.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eBeginner with guidance. You need to know how to handle a soldering iron: heat the pad from the side, place the pump on the molten joint, release. You will need a fine-tip iron, a board holder and a ventilated area. A first try on a scrap board saves you from learning the technique on the console you want to repair.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 manual desoldering pump 367D (black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Black","offer_id":54540462227789,"sku":"1005012613263653-Black-CN","price":13.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pompe-a-dessouder-367d_45f0990f-d147-40d6-86ac-23e216f75fee.png?v=1787319607"},{"product_id":"support-fer-a-souder-avec-eponge","title":"Soldering iron stand with sponge — stable base for the workshop","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eSoldering iron stand: the hot tip no longer touches the workbench\u003c\/h2\u003e\n\u003cp\u003eBetween two solder joints — a motherboard recap, an IPS screen ribbon cable, a USB-C charging port — the iron has to go somewhere. Laid flat on the bench, it burns the work surface, rolls and ends up falling. This \u003cstrong style=\"color:#0097ac;\"\u003emetal cradle stand\u003c\/strong\u003e holds the tip in the air and keeps the \u003cstrong style=\"color:#0097ac;\"\u003ecleaning sponge\u003c\/strong\u003e in the same place, so you can clean the tip without letting go of the part you're working on.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMetal cradle\u003c\/strong\u003e: the hot tip stays away from the work surface and the power cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCleaning sponge included\u003c\/strong\u003e: dampened then wrung out, it removes oxide and excess solder between joints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eOne-handed pick-up\u003c\/strong\u003e: put the iron down and pick it up again without taking your eyes off the board or putting down your tweezers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePassive accessory\u003c\/strong\u003e: nothing to assemble, nothing to plug in, nothing to adjust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe soldering iron is not included.\u003c\/strong\u003e This is not a soldering station: no electronics, no temperature control, no cable.\u003c\/li\u003e\n\u003cli\u003eThe supplier's original listing shows station specifications (500 °C, 100-240 V): they do not apply to this stand, which has no electrical parts.\u003c\/li\u003e\n\u003cli\u003eThe supplier does not document what distinguishes versions A, C and C4 — cradle shape, whether or not there is a solder reel holder. Choose based on the photos.\u003c\/li\u003e\n\u003cli\u003eIt does not hold hot air station nozzles or heavy-gauge soldering guns.\u003c\/li\u003e\n\u003cli\u003eCleaning with a damp sponge drops the tip temperature. To clean while hot without thermal shock, you need a metal wire ball.\u003c\/li\u003e\n\u003cli\u003eThe sponge is a consumable: it wears down with use and needs replacing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eDesigned for pencil-style soldering irons, the most common type in console modding (936 and 907 types and equivalents). As the accessory is entirely passive, it doesn't depend on the brand or power of the iron, and there's no console compatibility to check: it works just as well on a Game Boy Advance as on a PlayStation 1 motherboard or a modern handheld console. However, a very heavy-gauge iron, a soldering gun or a hot air nozzle won't fit in the cradle.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. Take the stand out of its packaging, dampen the sponge, wring it out and put the iron down. Have a clear work surface and, if you're soldering on a console board, flux and solder close at hand. The stand doesn't replace the usual precautions: never leave a powered iron unattended.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 soldering iron stand, in the chosen version (A, C or C4).\u003c\/li\u003e\n\u003cli\u003e1 cleaning sponge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Style C","offer_id":54540462293325,"sku":"1005005716694235-C  style","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Style A","offer_id":54540462326093,"sku":"1005005716694235-A style","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"C4","offer_id":54540462358861,"sku":"1005005716694235-C4","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/support-de-fer-a-souder-avec-eponge_702eb57d-8edd-4888-ae93-86f58039f076.png?v=1787314003"},{"product_id":"creme-etamage-panne-fer-a-souder","title":"Soldering iron tip cleaning and tinning cream — 6 to 26 g","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eTinning cream: a blackened tip that refuses solder becomes usable again\u003c\/h2\u003e\n\u003cp\u003eAfter a few dozen solder joints, an iron's tip gets covered in a layer of \u003cstrong style=\"color:#0097ac;\"\u003eblack oxide\u003c\/strong\u003e. The solder no longer spreads, it balls up, and heat no longer flows to the board: you keep at it, heat for too long, and end up lifting a trace. This cream strips that layer and deposits a fresh film of alloy on the tip. Two or three seconds of contact, a wipe on brass wool, and \u003cstrong style=\"color:#0097ac;\"\u003ewetting\u003c\/strong\u003e returns.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eStrips oxide\u003c\/strong\u003e: the hot tip goes into the cream, and the activated flux attacks the black layer that stops solder from sticking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eRe-tins the tip\u003c\/strong\u003e: a film of alloy is redeposited on the working area, and heat transfer to the solder joint resumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFour sizes\u003c\/strong\u003e: 6 g and 8 g for an iron used now and then, 16 g and 26 g for a busy workbench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eResealable metal tin\u003c\/strong\u003e: the cream stays on the work surface, is used without water or a sponge and closes up between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt can't save a mechanically worn tip. If the iron plating is pierced or pitted and the copper is eaten away, no product can rebuild it: the tip needs replacing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not solder paste.\u003c\/strong\u003e It is not for making a solder joint, resoldering a component or reflowing a chip.\u003c\/li\u003e\n\u003cli\u003eIt doesn't replace routine care: wipe on brass wool after each joint, re-tin the tip before switching the iron off.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer does not document the exact composition: there is nothing to confirm it is lead-free. Handle it as a lead-containing product — no contact with food, wash your hands after use, keep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eWhen hot, it gives off rosin fumes. Ventilated room or fume extractor, as for any soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAll standard iron-plated copper tips: fixed-temperature irons, adjustable soldering stations, portable USB-C powered irons. Conical, bevel and chisel shapes work without any trouble. The tip must be \u003cstrong style=\"color:#0097ac;\"\u003ehot\u003c\/strong\u003e — the product does nothing on a cold iron. However, if your iron's manufacturer prohibits tinning products in its instructions, follow its guidance rather than this.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eBeginner. Heat the iron, wipe the tip on the brass wool, dip it into the cream for 2 to 3 seconds while turning it, then wipe again. Repeat once if the tip is still dull. You will need to supply your own brass wool (or a damp sponge) and isopropyl alcohol to remove rosin residue if you're soldering straight afterwards.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 tin of cleaning and tinning cream — 6 g, 8 g, 16 g or 26 g depending on the chosen variant.\u003c\/li\u003e\n\u003cli\u003eNo soldering iron, tip or brass wool: these are sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eListing verified on 19 August 2026.\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; Modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"8 g","offer_id":54540462391629,"sku":"1005007953688818-8g","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"6 g","offer_id":54540462424397,"sku":"1005007953688818-6g","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"26 g","offer_id":54540462457165,"sku":"1005007953688818-26g","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"16 g","offer_id":54540462489933,"sku":"1005007953688818-16g","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/creme-de-nettoyage-et-d-etamage-de-panne-de-fer-a-souder_ff6ea699-d7f7-47a5-ae44-6e12ab8e2961.png?v=1787314036"},{"product_id":"troisieme-main-loupe-5x-feita-te-805","title":"Helping hand with 5X magnifier for soldering — FEITA TE-805 crocodile clips","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e5X magnifier helping hand: the board holds itself while you solder\u003c\/h2\u003e\n\u003cp\u003eResoldering a Game Boy save battery, replacing a swollen capacitor, repairing a torn-off trace: the problem is almost never the iron, it's holding the board, the wire and the iron with two hands. This \u003cstrong style=\"color:#0097ac;\"\u003eFEITA TE-805\u003c\/strong\u003e stand locks the part in \u003cstrong style=\"color:#0097ac;\"\u003eadjustable crocodile clips\u003c\/strong\u003e and places a \u003cstrong style=\"color:#0097ac;\"\u003e5X magnifier\u003c\/strong\u003e right above the solder joint.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e5X magnification\u003c\/strong\u003e: read silkscreen markings, spot a cold joint, line up a component leg without guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAdjustable crocodile clips\u003c\/strong\u003e: the board stays at the angle you want, both hands stay on the iron and the solder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUniversal workbench tool\u003c\/strong\u003e: motherboard, controller, cable, connector — nothing to adapt, nothing to set up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt does not replace a micro-soldering microscope: 5X is fine for through-hole components and common SMD parts, not for BGA or 0201 packages.\u003c\/li\u003e\n\u003cli\u003eNo lighting is advertised by the manufacturer for this model: plan for a workshop lamp.\u003c\/li\u003e\n\u003cli\u003eNo soldering iron, solder, flux or desoldering braid in the box.\u003c\/li\u003e\n\u003cli\u003eThe crocodile clips leave marks: put a piece of sleeving or cloth in between on a painted shell or fragile plastic.\u003c\/li\u003e\n\u003cli\u003eIt is not a vice: it holds a board and small parts, not a whole console or a heavy item.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA workbench tool, independent of the machine: nothing plugs in, no electrical compatibility is involved. It holds a Game Boy Advance motherboard just as well as a PS1 drive, a controller harness, a connector or a cable to be resoldered. However, it is not sized to hold a complete console.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo assembly: the stand is used as is, and the arms are positioned by hand. It is, however, a soldering accessory and assumes you know how to handle an iron. You will need a temperature-controlled iron, solder, desoldering braid and the right screwdriver for your machine — tri-wing for vintage Nintendo handhelds, Torx for many controllers.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 magnifier stand (5X) with articulated arms and crocodile clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eListing verified on 19 August 2026. Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Silver","offer_id":54540463505741,"sku":"1005008430144870-Silver","price":21.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/troisieme-main-loupe-5x-pour-soudure_281277ab-9eec-40b9-a4cd-5ee4937d02db.png?v=1787319740"},{"product_id":"tapis-reparation-silicone-compartiments-magnetiques","title":"Silicone soldering repair mat — magnetic compartments","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eRepair mat: take the console apart without losing or burning anything\u003c\/h2\u003e\n\u003cp\u003eOpening a Game Boy Advance, a PlayStation 1 or a modern handheld console means about ten tiny screws, fragile ribbon cables and a hot iron resting right next to them. On a bare desk, the screws roll away, the tip marks the work surface and the flux stains. This \u003cstrong style=\"color:#0097ac;\"\u003esilicone mat\u003c\/strong\u003e takes the heat, keeps small parts in its \u003cstrong style=\"color:#0097ac;\"\u003emagnetic compartments\u003c\/strong\u003e and wipes clean at the end of the session.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eHeat-resistant silicone\u003c\/strong\u003e: advertised up to 500 °C (932 °F) for brief contact, it protects the workbench from solder splashes and from a tip set down for a second.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMagnetic compartments\u003c\/strong\u003e: the screws from a shell stay in the slot where you put them, even if the mat gets knocked (models marked “magnetic”).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSoft, non-abrasive surface\u003c\/strong\u003e: the shell and the screen don't get scratched, the board doesn't slide and components don't clatter on the wood.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eInstant clean-up\u003c\/strong\u003e: flux, isopropyl alcohol and solder balls wipe off, the silicone doesn't absorb them.\u003c\/li\u003e\n\u003cli\u003eCan be stored rolled up or flat between repairs, without losing its shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt is not a grounded anti-static mat.\u003c\/strong\u003e Silicone insulates, it doesn't discharge anything: to handle a motherboard, you need an anti-static wrist strap and a grounding point.\u003c\/li\u003e\n\u003cli\u003eIt does not replace a soldering iron stand. The advertised heat resistance applies to brief contact, not to a hot iron left lying flat on it.\u003c\/li\u003e\n\u003cli\u003eThe magnetic compartments don't protect against anything: on the contrary, don't put magnetically sensitive media in them.\u003c\/li\u003e\n\u003cli\u003eModels S-100, S-110, S-120 and S-130 have no magnetic part: silicone surface only, no magnetic storage.\u003c\/li\u003e\n\u003cli\u003eDimensions, compartment layout and whether there is a sorting area vary from one model to another, and the supplier doesn't document them all. Choose based on the photos of the variant.\u003c\/li\u003e\n\u003cli\u003eNo soldering iron, screwdriver, tweezers or anti-static wrist strap: the box contains only the mat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA fully passive accessory, with no electronics or connections: there is no console compatibility to check. It works just as well for a Game Boy Advance or a Game Boy Color as for a PlayStation 1 motherboard, a controller, a modern handheld console, a smartphone or a watch. The only real criterion is size: a small model is enough for a controller or a handheld console, a large format is needed to lay out an open home console and its sub-assemblies.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. Roll the mat out on the workbench and start working on it straight away. For a clean teardown, have a set of precision screwdrivers, an opening spudger and an anti-static wrist strap to hand — the mat replaces none of the three. Clean with isopropyl alcohol or soapy water, then let it dry completely before putting it away.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 silicone repair mat, in the chosen model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"702 (magnetic)","offer_id":54540464292173,"sku":"1005005241808257-702(magnetic)","price":53.99,"currency_code":"EUR","in_stock":true},{"title":"S-100 (non-magnetic)","offer_id":54540464324941,"sku":"1005005241808257-S-100(No magnetic)","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"TE-607 (magnetic)","offer_id":54540464357709,"sku":"1005005241808257-TE-607(magnetic)","price":47.99,"currency_code":"EUR","in_stock":true},{"title":"TE-603 (magnetic)","offer_id":54540464390477,"sku":"1005005241808257-TE-603(magnetic)","price":31.99,"currency_code":"EUR","in_stock":true},{"title":"S-160 (magnetic)","offer_id":54540464423245,"sku":"1005005241808257-S-160(magnetic)","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"S-150 (magnetic)","offer_id":54540464456013,"sku":"1005005241808257-S-150(magnetic)","price":30.99,"currency_code":"EUR","in_stock":true},{"title":"S-170 (magnetic)","offer_id":54540464488781,"sku":"1005005241808257-S-170(magnetic)","price":51.99,"currency_code":"EUR","in_stock":true},{"title":"S-160C (magnetic)","offer_id":54540464521549,"sku":"1005005241808257-S-160C(magnetic)","price":50.99,"currency_code":"EUR","in_stock":true},{"title":"S-140 (magnetic)","offer_id":54540464554317,"sku":"1005005241808257-S-140(magnetic)","price":27.99,"currency_code":"EUR","in_stock":true},{"title":"S-120 (non-magnetic)","offer_id":54540464587085,"sku":"1005005241808257-S-120(No magnetic)","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"S-110 (non-magnetic)","offer_id":54540464619853,"sku":"1005005241808257-S-110(No magnetic)","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"S-130 (non-magnetic)","offer_id":54540464652621,"sku":"1005005241808257-S-130(No magnetic)","price":26.99,"currency_code":"EUR","in_stock":true},{"title":"S-180A1 (magnetic)","offer_id":54540464685389,"sku":"1005005241808257-S-180A1(magnetic)","price":54.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/tapis-de-reparation-silicone-pour-soudure_e4352f0f-d32b-4e76-a649-41903489b5fc.png?v=1787314084"},{"product_id":"lampe-loupe-led-5x-etabli","title":"5x LED magnifier lamp for the workbench — 3 colour temperatures, soldering and modding","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e5x LED magnifier lamp: see the trace before you put the iron down\u003c\/h2\u003e\n\u003cp\u003eReattaching an IPS screen ribbon cable, touching up a torn trace on a motherboard, finding the polarity of a capacitor: to the naked eye, you guess more than you see. This desk lamp combines a \u003cstrong style=\"color:#0097ac;\"\u003e5x magnifier\u003c\/strong\u003e and \u003cstrong style=\"color:#0097ac;\"\u003eLED lighting with 3 colour temperatures\u003c\/strong\u003e to light up the work area without casting shadows and keep both hands free.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e5x magnification\u003c\/strong\u003e: pads, component legs and micro-solder joints become readable without pressing your nose against the board.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLED lighting with 3 colour temperatures\u003c\/strong\u003e: cool, neutral or warm light depending on what you are trying to make out — a different contrast often reveals a cold joint.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eHands-free\u003c\/strong\u003e: the lamp sits on the workbench and stays in place, unlike a magnifier you have to hold while handling the iron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt is not a BGA rework microscope: at 5x, you work on through-hole components and standard-size SMD parts, not reballing.\u003c\/li\u003e\n  \u003cli\u003eThe lens is plastic, not optical glass: it scratches if you clean it dry or with an abrasive cloth.\u003c\/li\u003e\n  \u003cli\u003eNo soldering tools are supplied — no iron, no solder, no desoldering braid.\u003c\/li\u003e\n  \u003cli\u003eIt is not extra lighting for the whole room: the beam is focused on the area under the magnifier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eNo electronic compatibility required: it is a workbench tool, independent of the console being repaired. It works just as well on a Game Boy Advance, a PlayStation 1 or a Dreamcast as on a modern handheld console such as an Anbernic or a Miyoo. The type of power supply and mounting is shown on the manufacturer's packaging.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. The lamp sits on the workbench and switches on, there is nothing to solder or take apart. It is, however, aimed at people who already do repairs: it complements the soldering iron and the screwdriver kit, it is not a starting point.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 LED desk magnifier lamp (5x), 3 colour temperatures\u003c\/li\u003e\n  \u003cli\u003eMounting accessories and power cable depending on the manufacturer's packaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; Modding\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top:8px;\"\u003eListing verified on 19 August 2026. Delivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Type B","offer_id":54540464259405,"sku":"1005008203442628-Type B","price":27.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/lampe-loupe-led-5x-pour-etabli_f6dae788-fb44-484d-9e48-c8d8825613db.png?v=1787319805"},{"product_id":"troisieme-main-soudure-base-magnetique","title":"Soldering helping hand — magnetic base and flexible arms","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eSoldering helping hand: the board holds itself, you solder with both hands\u003c\/h2\u003e\n\u003cp\u003eResoldering a battery connector or redoing an IPS screen ribbon cable while holding the board in one hand and the iron in the other is the best way to tear off a trace. This \u003cstrong style=\"color:#0097ac;\"\u003ecrocodile clip arm\u003c\/strong\u003e sticks to the workbench with its \u003cstrong style=\"color:#0097ac;\"\u003emagnetic base\u003c\/strong\u003e and holds whatever position you give it thanks to its \u003cstrong style=\"color:#0097ac;\"\u003eflexible gooseneck\u003c\/strong\u003e: the part stays still, both hands stay free.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMagnetic base\u003c\/strong\u003e: the magnet holds the arm down on a steel work surface or a metal plate, and it no longer moves during the job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFlexible arm\u003c\/strong\u003e: the gooseneck bends by hand and keeps its angle — you bring the part to the iron, not the other way round.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCrocodile clip\u003c\/strong\u003e: holds a board, a wire to be tinned, a ribbon cable or a connector while the solder cools.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eIndependent arms\u003c\/strong\u003e: two clips are enough for a simple joint; the set of 8 lets you hold the board, several wires and the ground at the same time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt is not a vice or a rigid PCB holder: on a large board, or for prolonged hot air desoldering, a proper board holder remains more stable. The supplier's original title mentions a “PCB board holder” — in this set, it is the clips that hold the board.\u003c\/li\u003e\n  \u003cli\u003eThe magnet only grips on a ferrous surface. On a wooden desk, a silicone mat laid flat or an aluminium plate, it won't hold: you need to add a steel plate.\u003c\/li\u003e\n  \u003cli\u003eThe clips are bare metal. Clamped too hard, they mark a shell, crush a flexible ribbon cable or nick the solder mask: sleeve them before clamping a fragile part.\u003c\/li\u003e\n  \u003cli\u003eNo magnifier, no lighting, no spool holder, no soldering iron: none of these are supplied.\u003c\/li\u003e\n  \u003cli\u003eThe supplier states neither the arm length, nor the base diameter, nor the manufacturer. These values remain to be confirmed: we prefer not to make them up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA generic workshop tool: it does not mount on any console and does not depend on any model. It works on anything that ends up on the workbench — Game Boy, Game Boy Advance, PS1, PS2 and Dreamcast boards, modern handheld consoles, arcade sticks, cable harnesses, USB encoders. As for the surface, it needs something ferrous: a steel workbench, a metal plate, or a soldering mat laid on a steel sheet. It does not stick to wood, aluminium or glass.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo prerequisites for the tool itself: set it down, bend it, clamp. It is the work around it that requires experience. To be bought separately: a temperature-controlled soldering iron, solder, flux, desoldering braid, and a steel plate if your work surface is not magnetic. Adjust the pressure before clamping: on a ribbon cable or a painted shell, it is better to put a piece of heat-shrink tubing in between than bare metal.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSet of 2 or 8 magnetic arms with crocodile clips, depending on the variant chosen.\u003c\/li\u003e\n  \u003cli\u003eEach arm combines a magnetic base, a flexible gooseneck and a clip.\u003c\/li\u003e\n  \u003cli\u003eNothing else: no soldering iron, no base plate, no protective sleeving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Set of 2","offer_id":54540464718157,"sku":"1005011821862050-2pcs","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Set of 8","offer_id":54540464750925,"sku":"1005011821862050-8pcs","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/troisieme-main-de-soudure_a7e6f4c9-477d-40ee-8402-7b17110bb018.png?v=1787314108"},{"product_id":"microscope-numerique-usb-soudure-1080p","title":"USB digital microscope for soldering — 8 LEDs, 1080p sensor","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eUSB digital microscope: see the trace before you put the iron down\u003c\/h2\u003e\n\u003cp\u003eA torn trace on a Game Boy Advance board, a cold joint on an IPS screen connector, a leaking SMD capacitor on a PS1: to the naked eye, you see nothing, you guess. This \u003cstrong style=\"color:#0097ac;\"\u003eUSB digital microscope\u003c\/strong\u003e sends the magnified image to a PC, Mac or Android smartphone screen, with an adjustable \u003cstrong style=\"color:#0097ac;\"\u003ering of 8 LEDs\u003c\/strong\u003e that lights the area without casting shadows. You look at the screen, not the board.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eInspection before repair\u003c\/strong\u003e: spot a cut trace, a solder bridge, a cold joint or a trace of corrosion before heating anything.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e1080p sensor\u003c\/strong\u003e: the image goes via USB to the screen you already use, with no extra box or screen to buy.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eRing of 8 LEDs\u003c\/strong\u003e: the light comes from the lens axis, which removes the shadow of the iron and your finger on the area being viewed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eReading markings\u003c\/strong\u003e: identify an SMD component reference, a fuse number or a polarity mark that is unreadable to the naked eye.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eThree platforms\u003c\/strong\u003e: the supplier states Windows, Mac and Android. There is no hardware to install: it is a USB camera.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt is not a stereo microscope. The image is monocular and displayed on a screen, so it has no depth and a slight lag: soldering \u003cem\u003eunder\u003c\/em\u003e the lens takes practice. For inspection and checking, it is perfect; for continuous fine rework, a binocular microscope remains more comfortable.\u003c\/li\u003e\n  \u003cli\u003eThe advertised magnification is not an optical value. The supplier's original title claims “1600X” while its own technical sheet states “500X to 1500X”: it is a digital figure that depends on the size of your screen and the cropping. We therefore do not present either figure as a guarantee.\u003c\/li\u003e\n  \u003cli\u003eNo built-in screen and no battery: you need a computer or phone switched on and connected to use it. The supplier confirms there is no battery.\u003c\/li\u003e\n  \u003cli\u003eiPhone and iPad are not in the stated compatibility. On Android, USB OTG support is required — not all phones have it.\u003c\/li\u003e\n  \u003cli\u003ePlastic body, entry-level workshop product: no micrometric stage, no polarised ring light, no motorised focus.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA generic workshop tool: it does not mount on any console and does not depend on any model. It works on anything that ends up on the workbench — Game Boy, Game Boy Advance, PS1, PS2 and Dreamcast boards, modern handheld consoles, arcade sticks, USB encoders, ribbon cables and connectors. On the computer side, the supplier states Windows, Mac and Android; on Android, the phone must support USB OTG. iOS is not stated and we do not promise it. Declared certifications: CE, FCC, RoHS.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo prerequisites for the tool: plug in the USB, open the camera app, adjust the focus wheel. It is the work around it that requires experience. To be bought separately: a computer or an Android phone with USB OTG support, a temperature-controlled soldering iron, solder, flux, desoldering braid and something to hold the board — a helping hand or a soldering mat. Usage tip: start by observing, set the height and focus with nothing under the lens, then practise the technique on a dead board before working on a console you care about.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 USB digital microscope with a ring of 8 LEDs, supplier reference X4D.\u003c\/li\u003e\n  \u003cli\u003eIt connects via USB to the computer or phone.\u003c\/li\u003e\n  \u003cli\u003eThe exact details of the stand and accessories are not specified by the supplier. We prefer to say so rather than announce contents we don't have.\u003c\/li\u003e\n  \u003cli\u003eNo battery, no screen, no computer, no soldering iron: none of these are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Black \/ 1600x","offer_id":54540466225485,"sku":"1005007428381572-black-1600X","price":32.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/microscope-numerique-usb-pour-soudure_112371c3-1b1a-4642-ad11-86bcc6813bb7.png?v=1787314728"},{"product_id":"pannes-fer-a-souder-900m-t-lot-5","title":"900M-T soldering iron tips — pack of 5, 936\/937-type stations","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e900M-T tips: five replacement shapes for your soldering iron\u003c\/h2\u003e\n\u003cp\u003eOn a retro console, a single tip isn't enough: a capacitor pad, an IPS screen ribbon cable and a power connector call for neither the same fineness nor the same thermal mass. This pack of \u003cstrong style=\"color:#0097ac;\"\u003efive 900M-T tips\u003c\/strong\u003e gives you a choice of shape, and replaces the ones that \u003cstrong style=\"color:#0097ac;\"\u003eoxidation\u003c\/strong\u003e has eventually eaten away.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e900M-T format\u003c\/strong\u003e: the most widespread standard in the workshop, used by irons and stations with interchangeable tips of the 936\/937 type and their many clones.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFive tips per pack\u003c\/strong\u003e: enough to keep a fine point for precision work and a tip with more thermal mass for large joints, without buying them one by one.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDesigned for lead-free solder\u003c\/strong\u003e: the supplier states that the tips are intended for lead-free soldering, which works at a higher temperature than leaded solder.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eConsumable\u003c\/strong\u003e: a tip wears, pits and oxidises. Having a spare set saves you from stopping a job in the middle of a recap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDoes not fit stations with heating cartridges: no T12, C245 or C210. These systems integrate the heating element into the tip, and the 900M-T format does not fit them.\u003c\/li\u003e\n  \u003cli\u003eNor does it fit portable irons with proprietary cartridges or hot air station nozzles.\u003c\/li\u003e\n  \u003cli\u003eDoes not turn a low-end iron into a stable station: a tip compensates neither for an imprecise thermostat nor for insufficient power.\u003c\/li\u003e\n  \u003cli\u003eThe exact composition of each assortment (Set A, Set B, Set C) is not confirmed by the supplier: the shapes delivered are those shown in the images of the chosen variant.\u003c\/li\u003e\n  \u003cli\u003eThe supplier states a copper core; the exact nature of the plating is not documented. An unplated tip erodes quickly with lead-free solder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with soldering irons and soldering stations that accept tips of the \u003cstrong style=\"color:#0097ac;\"\u003e900M \/ 900M-T\u003c\/strong\u003e standard: this is the format of 907-type handles and of 936 and 937 stations, as well as most entry-level stations sold with interchangeable tips. Before ordering, check that your iron's tip comes out by loosening a ring nut, and that its shank is about 4 mm in diameter. Not covered: T12 cartridge stations, C245 and C210 systems, USB-C irons with proprietary tips and hot air stations.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo disassembly and no soldering for the installation itself: with the iron cold, loosen the retaining nut, remove the old tip, insert the new one and tighten again. Allow one minute. Re-tin the new tip as soon as it first heats up, with a little fresh solder: this film protects it from oxidation.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e5 soldering iron tips in 900M-T format, according to the chosen assortment (Set A, Set B or Set C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Assortment B — pack of 5","offer_id":54540466389325,"sku":"1005005253736613-Set B -5PCS","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Assortment C — pack of 5","offer_id":54540466422093,"sku":"1005005253736613-Set C -5PCS","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Assortment A — pack of 5","offer_id":54540466454861,"sku":"1005005253736613-Set A -5PCS","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pannes-de-fer-a-souder-900m-t_ddd9755d-1ca0-48c2-8670-373df06b183e.png?v=1787319872"},{"product_id":"fil-a-souder-sans-plomb-colophane-0-8-1-0-mm","title":"Lead-free rosin core solder wire — 0.8 and 1.0 mm","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eRosin core solder wire: the basic consumable of a retro workshop\u003c\/h2\u003e\n\u003cp\u003eReplacing a swollen capacitor on a Game Boy, resoldering an IPS screen ribbon cable or reworking a cold joint on a PlayStation board: it all starts with the spool. This \u003cstrong style=\"color:#0097ac;\"\u003elead-free\u003c\/strong\u003e wire has a \u003cstrong style=\"color:#0097ac;\"\u003e2% rosin core\u003c\/strong\u003e that cleans the surface as it heats, and comes in \u003cstrong style=\"color:#0097ac;\"\u003e0.8 or 1.0 mm\u003c\/strong\u003e depending on how fine the pads you are working on are.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eBuilt-in flux\u003c\/strong\u003e: the rosin (2% of the wire) cleans off oxide while you solder, with no need for a separate bottle of flux for everyday joints.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwo diameters\u003c\/strong\u003e: 0.8 mm for tightly spaced pads and SMD components, 1.0 mm for connectors, wires and large ground joints.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eThree sizes\u003c\/strong\u003e: 20 g for occasional fixes, 50 g for regular use, 100 g for a busy workshop.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLead-free alloy\u003c\/strong\u003e: composition stated by the manufacturer as 97.7% tin, 0.3% copper, 0% lead, declared RoHS compliant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt is not the easiest wire to start with. A lead-free alloy needs a hotter tip and wets less well than 60\/40: if you are soldering for the first time, practise on a scrap board.\u003c\/li\u003e\n  \u003cli\u003eIt does not replace liquid flux or flux paste for delicate operations — desoldering a shield, reworking a ribbon cable, a multi-pin connector.\u003c\/li\u003e\n  \u003cli\u003e“No-clean” means the residues are low-corrosion, not that they are invisible: a wipe with isopropyl alcohol is still recommended on a visible board.\u003c\/li\u003e\n  \u003cli\u003eThe melting point of 183 °C stated by the supplier corresponds to a tin-lead alloy and contradicts the declared lead-free composition. We are not repeating this value until it is confirmed: plan for an iron that can hold 320 to 350 °C.\u003c\/li\u003e\n  \u003cli\u003eNo soldering iron, tip, desoldering braid or pump is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eIt is a general electronics consumable: it suits all retro console and controller boards, IPS screen modules, tab batteries, arcade buttons and connectors. It is not tied to any particular machine. However, it is not intended for plumbing, jewellery or aluminium soldering, nor for food-contact soldering.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eSoldering skills essential: this product is aimed at people who already handle an iron. You will need a temperature-controlled iron with a fine tip, a sponge or bronze wool, desoldering braid and a ventilated room — rosin fumes need to be cleared. On a console board, a helping hand or a holding vice keeps you from tearing off a pad. If in doubt about the diameter, 0.8 mm covers the vast majority of console repair work.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 spool of solder wire, diameter and weight according to the chosen variant (0.8 mm in 20, 50 or 100 g · 1.0 mm in 20 or 50 g).\u003c\/li\u003e\n  \u003cli\u003eNo tools, no additional flux, no instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eListing verified on 19 August 2026.\u003c\/p\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"0.8 mm — 50 g","offer_id":54540466553165,"sku":"1005006222917407-0.8mm50g 1pcs","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm — 50 g","offer_id":54540466585933,"sku":"1005006222917407-1.0mm 50g 1pcs","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm — 100 g","offer_id":54540466618701,"sku":"1005006222917407-0.8mm 100g 1pcs","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm — 20 g","offer_id":54540466651469,"sku":"1005006222917407-0.8mm 20g 1pcs","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"1.0 mm — 20 g","offer_id":54540466684237,"sku":"1005006222917407-1.0mm 20g 1pcs","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/fil-a-souder-sans-plomb-a-noyau-de-colophane_2b9f89f3-e5e6-404c-84f3-3a13180e1210.png?v=1787319931"},{"product_id":"flux-soudure-colophane-kek-559","title":"KEK 559 rosin soldering flux — 10 or 30 ml tube","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eKEK 559 flux: solder takes hold on the first try\u003c\/h2\u003e\u003cp\u003eA rework joint that beads up, a pad you heat for too long, a connector that refuses to let go: nine times out of ten, flux is missing. This \u003cstrong style=\"color:#0097ac;\"\u003erosin\u003c\/strong\u003e paste removes the oxide the moment the heat arrives, so the solder wets the copper instead of rolling over it. It's the basic consumable for \u003cstrong style=\"color:#0097ac;\"\u003erecapping\u003c\/strong\u003e, fitting an \u003cstrong style=\"color:#0097ac;\"\u003eIPS screen\u003c\/strong\u003e and any charging port rework on a console board.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eImmediate wetting\u003c\/strong\u003e: the solder spreads and shines instead of forming dull balls, and cold joints disappear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDesoldering with braid\u003c\/strong\u003e: a dab of flux on a row of pins and the braid soaks up the solder without lifting the pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTacky paste, not liquid\u003c\/strong\u003e: it stays where you put it, even under the airflow of a hot air station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwo sizes\u003c\/strong\u003e: 10 ml for a one-off repair, 30 ml for working through board after board.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not solder paste.\u003c\/strong\u003e Despite the manufacturer's label, this product contains no solder: you need solder wire or solder balls alongside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need to clean up afterwards\u003c\/strong\u003e — isopropyl alcohol and a brush. Rosin residue is sticky and holds dust.\u003c\/li\u003e\n\u003cli\u003eIt won't make up for an underpowered iron or an oxidised tip: flux is no substitute for the right temperature.\u003c\/li\u003e\n\u003cli\u003eIt won't fix a lifted pad or a cut trace — for that, you need a jumper wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eUniversal: home console and handheld console motherboards, power supplies, connectors, charging ports, SMD and through-hole components. Works with both leaded and lead-free solder, with an iron or a hot air station. It isn't a console-specific product, so no revision is excluded.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eThis is a workshop consumable: it assumes you already have a soldering iron and solder wire. No cutting, no special disassembly. Keep something on hand to clean off the residue (isopropyl alcohol, anti-static brush) and work in a ventilated room — rosin smokes when heated.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 tube of KEK 559 soldering flux — 10 ml or 30 ml depending on the variant chosen\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"KEK 559-10ml","offer_id":54540466487629,"sku":"1005006113424502-KEK 559-10ml","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"KEK 559-30ml","offer_id":54540466520397,"sku":"1005006113424502-KEK 559-30ml","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/flux-de-soudure-a-la-colophane-kek-559_e04b7d7d-a42b-4795-89af-5c730b31701c.png?v=1787320009"},{"product_id":"pate-a-flux-m35-micro-soudure","title":"M35 soldering flux paste — SMD, BGA and ribbon cable micro-soldering","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eM35 flux paste: solder that flows instead of balling up\u003c\/h2\u003e\n\u003cp\u003eOn a console board that's twenty or thirty years old, solder often refuses to take: the pad is \u003cstrong style=\"color:#0097ac;\"\u003eoxidised\u003c\/strong\u003e, the tip slides, the joint stays dull and domed. A dab of \u003cstrong style=\"color:#0097ac;\"\u003eflux\u003c\/strong\u003e applied before the iron chemically cleans the area during heating, and the solder flows on its own. It's the basic consumable for \u003cstrong style=\"color:#0097ac;\"\u003emicro-soldering\u003c\/strong\u003e: ribbon cables, connectors, capacitors, IPS screens.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCleans during heating\u003c\/strong\u003e: dissolves the oxide layer on pads and pins, which lets the solder wet the surface instead of rolling into a ball.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine component work\u003c\/strong\u003e: rework of SMD, QFP, FFC\/FPC connectors and BGA balls, with an iron or a hot air station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eThree pack sizes\u003c\/strong\u003e: a single unit for a one-off job, a pack of 2 if you repair regularly, a pack of 5 for a workshop or a group purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDeclared RoHS compliant\u003c\/strong\u003e by the supplier, with no substance of very high concern stated.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not solder.\u003c\/strong\u003e Flux prepares the surface but adds no metal: you also need solder wire or solder paste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not glue.\u003c\/strong\u003e It doesn't hold anything mechanically and won't fix a torn trace, a lifted pad or a dead component.\u003c\/li\u003e\n\u003cli\u003eThe supplier provides no volume, no datasheet and no activation temperature. The variant indicates a \u003cstrong\u003enumber of units, not a guaranteed weight\u003c\/strong\u003e — we won't make one up.\u003c\/li\u003e\n\u003cli\u003eThe nature of the residue left after heating isn't documented. Treat it as a flux that needs cleaning and go over the area with isopropyl alcohol.\u003c\/li\u003e\n\u003cli\u003eNo console, iron or tool is supplied with this consumable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eNo model restrictions: it's a workshop consumable, not a spare part. It can be used on any printed circuit board — home console and handheld console motherboards, screen ribbon cables, battery connectors, USB-C ports, controller and arcade stick PCBs. However, it isn't intended for plumbing or jewellery soldering, nor for aluminium or stainless steel, which require dedicated fluxes.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eIntermediate: this product assumes you already solder. You need a fine-tip iron with adjustable temperature (or a hot air station for BGA), solder, desoldering braid and isopropyl alcohol with a brush for the final clean. Apply a very small amount — any excess spreads under neighbouring components and makes cleaning harder. Work in a ventilated area: flux fumes should not be inhaled.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1, 2 or 5 units of M35 flux paste, depending on the variant chosen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eListing verified on 19 August 2026.\u003c\/p\u003e\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Pack of 2","offer_id":54540469731661,"sku":"1005007828249764-M35 2pcs","price":25.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5","offer_id":54540469764429,"sku":"1005007828249764-M35 5pcs","price":44.99,"currency_code":"EUR","in_stock":true},{"title":"Single unit","offer_id":54540469797197,"sku":"1005007828249764-M35","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pate-a-flux-de-soudure-m35_8e8ca3cc-774b-47ac-b7de-44fdb9029706.png?v=1787320069"},{"product_id":"fil-a-souder-sans-plomb-50-g","title":"Lead-free solder wire 50 g — flux core, Ø 0.5 to 2.0 mm","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eLead-free solder wire: the basic supply for the retro workshop\u003c\/h2\u003e\n\u003cp\u003eRecapping a motherboard, fitting an IPS screen, replacing a worn headphone jack or a battery connector: most jobs on a 90s machine come down to a few solder joints. This 50 g spool of \u003cstrong style=\"color:#0097ac;\"\u003elead-free solder\u003c\/strong\u003e with a \u003cstrong style=\"color:#0097ac;\"\u003eflux core\u003c\/strong\u003e covers those uses, with \u003cstrong style=\"color:#0097ac;\"\u003eseven diameters\u003c\/strong\u003e from 0.5 to 2.0 mm to choose from.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eBuilt-in flux core\u003c\/strong\u003e: 2% rosin flux, released as the solder melts. It cleans the surface as you work, with no need for separate flux on routine joints.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSeven diameters\u003c\/strong\u003e: 0.5 and 0.6 mm for component leads and fine ribbon cables, 0.8 and 1.0 mm for general use, 1.2 to 2.0 mm for large joints and power wires.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLead-free alloy\u003c\/strong\u003e: stated melting point of 227 °C, consistent with a temperature-controlled iron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt doesn't handle like tin-lead solder. Lead-free needs a hotter tip and gives matt-looking joints: it isn't the most forgiving wire for your first soldering job.\u003c\/li\u003e\n  \u003cli\u003eThe 50 g stated by the manufacturer includes the weight of the spool. The actual amount of wire is therefore lower.\u003c\/li\u003e\n  \u003cli\u003eIt isn't for desoldering: removing a component requires desoldering braid or a desoldering pump, not supplied.\u003c\/li\u003e\n  \u003cli\u003eNo soldering iron, tip, additional liquid flux or stand included.\u003c\/li\u003e\n  \u003cli\u003eThe diameter you choose is fixed: a 2.0 mm spool won't let you work on fine SMD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis isn't a part tied to a machine: you choose by diameter, not by console. The wire suits hobby electronics in general — handheld and home console motherboards, controllers, IPS screen kits, battery modules, connectors, buttons and ribbon cables. It isn't intended for plumbing, jewellery or mechanical assemblies on thick metals.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eA temperature-controlled soldering iron is essential, with a fine tip for the 0.5 to 0.8 mm diameters. Have something on hand for cleaning up afterwards: desoldering braid, flux and isopropyl alcohol are not supplied. Work in a ventilated room, as rosin fumes are irritating. If you've never soldered before, practise on a scrap board before opening a console you care about.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 spool of lead-free flux-core solder wire, 50 g including the spool, in the diameter ordered.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"0.8 mm","offer_id":54540469502285,"sku":"1005006603596013-0.8mm","price":20.99,"currency_code":"EUR","in_stock":true},{"title":"0.5 mm","offer_id":54540469535053,"sku":"1005006603596013-0.5mm","price":19.99,"currency_code":"EUR","in_stock":false},{"title":"1.2 mm","offer_id":54540469567821,"sku":"1005006603596013-1.2mm","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"2.0 mm","offer_id":54540469600589,"sku":"1005006603596013-2.0mm","price":19.99,"currency_code":"EUR","in_stock":false},{"title":"0.6 mm","offer_id":54540469633357,"sku":"1005006603596013-0.6mm","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"1.5 mm","offer_id":54540469666125,"sku":"1005006603596013-1.5mm","price":19.99,"currency_code":"EUR","in_stock":false},{"title":"1.0 mm","offer_id":54540469698893,"sku":"1005006603596013-1.0mm","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/fil-a-souder-sans-plomb-50-g_d1bcd040-04f4-4361-8b72-35cac4139f38.png?v=1787320123"},{"product_id":"panne-t12-fer-a-souder-70-w","title":"T12 soldering iron tip — 70 W cartridge, 11 profiles","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eT12 tip: the point that makes the repair\u003c\/h2\u003e\n\u003cp\u003eReworking a tired capacitor on a motherboard, resoldering an IPS screen ribbon cable, repairing a cartridge connector: it's the shape of the tip that makes the difference, well before the station. A \u003cstrong style=\"color:#0097ac;\"\u003eT12 cartridge\u003c\/strong\u003e houses the heating element and the thermocouple inside the tip itself: the \u003cstrong style=\"color:#0097ac;\"\u003etemperature is regulated right where the solder is\u003c\/strong\u003e and recovers within a few seconds after each joint.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eHeating built into the tip\u003c\/strong\u003e: the heating element and thermocouple are inside the cartridge, stated range of 200 to 450 °C, up to 70 W at 12 to 24 V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e11 profiles to choose from\u003c\/strong\u003e: D24 and D52 flat chisels, BC2 and BC3 bevelled conicals, C4 and C08 fine bevels, I and ILS fine points, J02 and JL02 bent tips, BL conical. The numbers follow the T12 naming (D24 = 2.4 mm, D52 = 5.2 mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCold swap\u003c\/strong\u003e: the cartridge slides into the handle, with no tools or soldering — you go from a wide chisel to a fine point in a few seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt isn't a soldering iron: no station, handle or power supply is included. You're buying a tip on its own, in the profile of the variant chosen.\u003c\/li\u003e\n\u003cli\u003eIt doesn't fit screw-on tip irons (900M, T18) or T115 or T210 cartridge handles: the T12 format isn't interchangeable.\u003c\/li\u003e\n\u003cli\u003eIt won't make up for an underpowered station: with lead-free solder or a thick ground plane, you need a power supply able to sustain the 70 W.\u003c\/li\u003e\n\u003cli\u003eGeneric compatible part, with no manufacturer marking: its lifespan depends on maintenance and remains shorter than that of an original cartridge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eHandles and stations that accept \u003cstrong style=\"color:#0097ac;\"\u003eT12\u003c\/strong\u003e format cartridges: FX-951-type stations, T12 handles available on the market and T12 kit stations powered at 12 to 24 V. \u003cem\u003eNot\u003c\/em\u003e covered: screw-on tip irons (900M, T18, entry-level series), T115 and T210 cartridges, and USB-C irons whose tip is built into the body. If in doubt, check that your handle accepts a long T12 cartridge before ordering.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo soldering or disassembly to install the tip: with the station off and the cartridge cold, you remove the old one and slide the new one into the handle. However, plan to \u003cstrong style=\"color:#0097ac;\"\u003ecalibrate the temperature\u003c\/strong\u003e if your station allows it, and to tin the tip as soon as it first heats up. Clean with brass wool, never with a file or sandpaper: it's the plating that keeps the tip wettable.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 T12 soldering iron tip, in the profile corresponding to the selected variant.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eSee also: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/consoles-originales-moddees\" style=\"color:#0097ac;\"\u003eModded original consoles\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"T12-BC2","offer_id":54540470452557,"sku":"1005006060953119-T12-BC2","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-C4","offer_id":54540470485325,"sku":"1005006060953119-T12-C4","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-C08","offer_id":54540470518093,"sku":"1005006060953119-T12-C08","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-J02","offer_id":54540470550861,"sku":"1005006060953119-T12-J02","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-D52","offer_id":54540470583629,"sku":"1005006060953119-T12-D52","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-JL02","offer_id":54540470616397,"sku":"1005006060953119-T12-JL02","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-I","offer_id":54540470649165,"sku":"1005006060953119-T12-I","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-ILS","offer_id":54540470681933,"sku":"1005006060953119-T12-ILS","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-D24","offer_id":54540470714701,"sku":"1005006060953119-T12-D24","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-BC3","offer_id":54540470747469,"sku":"1005006060953119-T12-BC3","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"T12-BL","offer_id":54540470780237,"sku":"1005006060953119-T12-BL","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/panne-t12-pour-fer-a-souder_4541b327-02a8-4edb-8a87-a6707dbf48d1.png?v=1787314779"},{"product_id":"fer-a-souder-sans-fil-usb-c-jcd-c200","title":"JCD C200 USB-C cordless soldering iron — adjustable 300 to 450 °C","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eJCD C200 cordless soldering iron: solder a console without hunting for a socket\u003c\/h2\u003e\n\u003cp\u003eReplacing a capacitor on a Mega Drive, fitting the ribbon cable of an \u003cstrong style=\"color:#0097ac;\"\u003eIPS kit\u003c\/strong\u003e or reattaching a battery wire doesn't require a 60 W station: it requires a fine tip that's hot in a few seconds, and both hands free. The JCD C200 is a \u003cstrong style=\"color:#0097ac;\"\u003ebattery-powered\u003c\/strong\u003e iron, rechargeable via \u003cstrong style=\"color:#0097ac;\"\u003eUSB-C\u003c\/strong\u003e, with a temperature adjustable from 300 to 450 °C shown on the display.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAdjustable temperature 300-450 °C\u003c\/strong\u003e: you choose the setting according to the solder you use, lead-free or conventional, and the display shows the current value. Stability stated by JCD at ±1 °C.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSelf-powered, no mains cable\u003c\/strong\u003e: the iron runs on its built-in battery — 800 mAh on the C200 version, 1000 mAh on the C200L version — and recharges on any USB-C charger or power bank.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePen format\u003c\/strong\u003e: the grip stays slim, which matters when you're soldering screen pads or AWG 30 wire on a handheld motherboard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt isn't a soldering station. The stated power is 8 W: thick ground planes, metal shielding and large power connectors require a more powerful iron.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't desolder. No pump, braid or hot air: to remove a component, you need the corresponding tools as well.\u003c\/li\u003e\n  \u003cli\u003eThe manufacturer doesn't state the actual battery life. For a long session, plan to work with the USB-C cable plugged in.\u003c\/li\u003e\n  \u003cli\u003eConsumables are not supplied: solder, flux and desoldering braid are up to you.\u003c\/li\u003e\n  \u003cli\u003eThe supplier's datasheet mentions an “input voltage 220 V”, which doesn't match a USB-C powered device. Only power it through its USB-C port, never directly from the mains.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eIt's a tool, not a part: it doesn't connect to any console. It's sized for the \u003cstrong style=\"color:#0097ac;\"\u003efine soldering\u003c\/strong\u003e you come across in retro gaming — IPS screen ribbon cables and pads, battery wires, buttons, crystals, small capacitors on Game Boy, Game Boy Color, Game Boy Advance, PS1, Dreamcast or Mega Drive. However, it isn't suited to large thermal masses: chassis, shielding, home console power connectors, arcade cabinet wiring.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eFor users who have soldered before. The iron doesn't do away with the need for flux, a cleaning sponge or wool, or a clear work surface. Work in a ventilated room: flux fumes should not be inhaled. The tip stays burning hot for several tens of seconds after switching off — let it cool before putting the iron away.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 JCD cordless soldering iron, in the version chosen (C200, C200L or C200L-2).\u003c\/li\u003e\n  \u003cli\u003e1 tip fitted on the iron.\u003c\/li\u003e\n  \u003cli\u003eThe accessories supplied vary by version: only count on the iron and its tip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eAccessories \u0026amp; tools\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"C200L \/ Grey","offer_id":54540470255949,"sku":"1005008350198853-C200L-Grey-China Mainland","price":33.99,"currency_code":"EUR","in_stock":true},{"title":"C200 \/ Orange","offer_id":54540470288717,"sku":"1005008350198853-C200-Orange-China Mainland","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"C200L-2 \/ Orange","offer_id":54540470321485,"sku":"1005008350198853-C200L-2-Orange-China Mainland","price":44.99,"currency_code":"EUR","in_stock":true},{"title":"C200L-2 \/ Grey","offer_id":54540470354253,"sku":"1005008350198853-C200L-2-Grey-China Mainland","price":44.99,"currency_code":"EUR","in_stock":true},{"title":"C200L \/ Orange","offer_id":54540470387021,"sku":"1005008350198853-C200L-Orange-China Mainland","price":33.99,"currency_code":"EUR","in_stock":true},{"title":"C200 \/ Grey","offer_id":54540470419789,"sku":"1005008350198853-C200-Grey-China Mainland","price":28.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/fer-a-souder-sans-fil-usb-c-jcd-c200_fd94477b-2940-4efa-a4c0-afdffb74e6a0.png?v=1787314822"},{"product_id":"tresse-a-dessouder-cuivre-1-5-m","title":"Pre-fluxed copper desoldering braid 1.5 m — widths 1 to 4 mm","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eDesoldering braid: remove solder without tearing the trace\u003c\/h2\u003e\n\u003cp\u003eOn a retro motherboard, the tricky part isn't soldering, it's \u003cstrong style=\"color:#0097ac;\"\u003eremoving the solder already in place\u003c\/strong\u003e — replacing a swollen capacitor, taking off a cartridge connector, redoing a failed joint. The desoldering pump clears the bulk, the braid picks up the rest. This 1.5 m roll of \u003cstrong style=\"color:#0097ac;\"\u003epre-fluxed braided copper\u003c\/strong\u003e soaks up molten solder by capillary action and leaves a clean pad, ready to be resoldered.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCleans a pad down to the copper\u003c\/strong\u003e: the braid draws up molten solder, including from a plated through-hole the pump didn't clear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSeven widths from 1 to 4 mm\u003c\/strong\u003e: 1 to 1.5 mm for SMD leads and fine ribbon cables, 2 to 2.5 mm for through-hole components, 3 to 4 mm for ground areas and large connectors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eBuilt-in flux\u003c\/strong\u003e: the flux in the braid makes the solder wet immediately, with no need to add more on each pass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e1.5 m roll\u003c\/strong\u003e: braid gets used up quickly, as you cut off the saturated section after each use. Packs of 5 to 200 rolls are available for workshops doing repair after repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt doesn't replace a temperature-controlled soldering iron: the braid heats nothing, it absorbs. Without an iron able to hold 300 to 350 °C on a ground area, it won't take up the solder.\u003c\/li\u003e\n  \u003cli\u003eIt won't desolder a component on its own: it cleans pads, but it won't free a multi-pin connector without hot air or a pump.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't forgive overheating: leaving the iron too long on a pad of a thin retro board lifts the trace. That's the classic failure — the risk comes from the technique, not the braid.\u003c\/li\u003e\n  \u003cli\u003eA section already saturated with solder absorbs nothing more: it gets cut off and thrown away. Get plenty.\u003c\/li\u003e\n  \u003cli\u003eThe built-in flux leaves a residue: you need to clean with isopropyl alcohol after the job, the braid doesn't do it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eGeneric electronics tool: handheld and home console motherboards, controllers, screen ribbon cables, cartridge connectors, power boards. There's no machine-specific compatibility — the braid suits any standard tin-lead or lead-free solder joint. The only choice that matters is the width, chosen according to the size of the solder joint: too wide, it draws away heat and won't wet; too narrow, it saturates in one pass. Flux melting point stated by the manufacturer at around 183 °C. The exact flux composition isn't documented by the supplier: \u003cstrong style=\"color:#0097ac;\"\u003eto be confirmed\u003c\/strong\u003e if you work in a controlled atmosphere.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eBeginner with guidance. No cutting and no shell disassembly related to the braid itself, but you need to know how to hold a soldering iron. You'll need: a fine-tip iron with adjustable temperature, liquid flux if your joints are old and oxidised, side cutters to remove the used section, and isopropyl alcohol to clean up afterwards. Always work on a board that is switched off and discharged.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePre-fluxed copper desoldering braid, 1.5 m roll.\u003c\/li\u003e\n  \u003cli\u003eWidth of your choice: 1 · 1.5 · 2 · 2.5 · 3 · 3.5 or 4 mm, depending on the variant.\u003c\/li\u003e\n  \u003cli\u003eNumber of rolls depending on the variant: 1, 2, 3, 5, 10, 20, 50, 100 or 200.\u003c\/li\u003e\n  \u003cli\u003eNo iron, liquid flux or tools supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Pack of 10 \/ 3 mm","offer_id":54540470813005,"sku":"1005006427770026-10 pieces-China Mainland-3mm x 1.5m","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 3 mm","offer_id":54540470845773,"sku":"1005006427770026-5 pieces-China Mainland-3mm x 1.5m","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 3 mm","offer_id":54540470878541,"sku":"1005006427770026-50 pieces-China Mainland-3mm x 1.5m","price":60.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 3 mm","offer_id":54540470911309,"sku":"1005006427770026-20 pieces-China Mainland-3mm x 1.5m","price":34.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 3 mm","offer_id":54540470944077,"sku":"1005006427770026-200 pieces-China Mainland-3mm x 1.5m","price":204.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 3 mm","offer_id":54540470976845,"sku":"1005006427770026-100 pieces-China Mainland-3mm x 1.5m","price":106.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 3.5 mm","offer_id":54540471009613,"sku":"1005006427770026-2 pieces-China Mainland-3.5mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 3.5 mm","offer_id":54540471042381,"sku":"1005006427770026-1 piece-China Mainland-3.5mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 2.5 mm","offer_id":54540471075149,"sku":"1005006427770026-20 pieces-China Mainland-2.5mm x 1.5m","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 2.5 mm","offer_id":54540471107917,"sku":"1005006427770026-10 pieces-China Mainland-2.5mm x 1.5m","price":22.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 2.5 mm","offer_id":54540471140685,"sku":"1005006427770026-100 pieces-China Mainland-2.5mm x 1.5m","price":98.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 2.5 mm","offer_id":54540471173453,"sku":"1005006427770026-50 pieces-China Mainland-2.5mm x 1.5m","price":57.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 3 mm","offer_id":54540471206221,"sku":"1005006427770026-1 piece-China Mainland-3mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 2.5 mm","offer_id":54540471238989,"sku":"1005006427770026-200 pieces-China Mainland-2.5mm x 1.5m","price":187.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 3 mm","offer_id":54540471271757,"sku":"1005006427770026-3 pieces-China Mainland-3mm x 1.5m","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 3 mm","offer_id":54540471304525,"sku":"1005006427770026-2 pieces-China Mainland-3mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 4 mm","offer_id":54540471337293,"sku":"1005006427770026-3 pieces-China Mainland-4mm x 1.5m","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 4 mm","offer_id":54540471370061,"sku":"1005006427770026-2 pieces-China Mainland-4mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 4 mm","offer_id":54540471402829,"sku":"1005006427770026-10 pieces-China Mainland-4mm x 1.5m","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 4 mm","offer_id":54540471435597,"sku":"1005006427770026-5 pieces-China Mainland-4mm x 1.5m","price":20.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 4 mm","offer_id":54540471468365,"sku":"1005006427770026-50 pieces-China Mainland-4mm x 1.5m","price":64.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 4 mm","offer_id":54540471501133,"sku":"1005006427770026-20 pieces-China Mainland-4mm x 1.5m","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 4 mm","offer_id":54540471533901,"sku":"1005006427770026-200 pieces-China Mainland-4mm x 1.5m","price":217.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 100 \/ 4 mm","offer_id":54540471566669,"sku":"1005006427770026-100 pieces-China Mainland-4mm x 1.5m","price":114.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 3.5 mm","offer_id":54540471599437,"sku":"1005006427770026-5 pieces-China Mainland-3.5mm x 1.5m","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 3.5 mm","offer_id":54540471632205,"sku":"1005006427770026-3 pieces-China Mainland-3.5mm x 1.5m","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 3.5 mm","offer_id":54540471664973,"sku":"1005006427770026-20 pieces-China Mainland-3.5mm x 1.5m","price":35.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 3.5 mm","offer_id":54540471697741,"sku":"1005006427770026-10 pieces-China Mainland-3.5mm x 1.5m","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 3.5 mm","offer_id":54540471730509,"sku":"1005006427770026-100 pieces-China Mainland-3.5mm x 1.5m","price":106.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 3.5 mm","offer_id":54540471763277,"sku":"1005006427770026-50 pieces-China Mainland-3.5mm x 1.5m","price":63.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 4 mm","offer_id":54540471796045,"sku":"1005006427770026-1 piece-China Mainland-4mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 3.5 mm","offer_id":54540471828813,"sku":"1005006427770026-200 pieces-China Mainland-3.5mm x 1.5m","price":212.99,"currency_code":"EUR","in_stock":false},{"title":"Pack of 200 \/ 1 mm","offer_id":54540471861581,"sku":"1005006427770026-200 pieces-China Mainland-1mm x 1.5m","price":140.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 1 mm","offer_id":54540471894349,"sku":"1005006427770026-100 pieces-China Mainland-1mm x 1.5m","price":82.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 1.5 mm","offer_id":54540471927117,"sku":"1005006427770026-2 pieces-China Mainland-1.5mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 1.5 mm","offer_id":54540471959885,"sku":"1005006427770026-1 piece-China Mainland-1.5mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 1.5 mm","offer_id":54540471992653,"sku":"1005006427770026-5 pieces-China Mainland-1.5mm x 1.5m","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 1.5 mm","offer_id":54540472025421,"sku":"1005006427770026-3 pieces-China Mainland-1.5mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 1.5 mm","offer_id":54540472058189,"sku":"1005006427770026-20 pieces-China Mainland-1.5mm x 1.5m","price":30.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 1.5 mm","offer_id":54540472090957,"sku":"1005006427770026-10 pieces-China Mainland-1.5mm x 1.5m","price":22.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 1 mm","offer_id":54540472123725,"sku":"1005006427770026-1 piece-China Mainland-1mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 1 mm","offer_id":54540472156493,"sku":"1005006427770026-3 pieces-China Mainland-1mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 1 mm","offer_id":54540472189261,"sku":"1005006427770026-2 pieces-China Mainland-1mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 1 mm","offer_id":54540472222029,"sku":"1005006427770026-10 pieces-China Mainland-1mm x 1.5m","price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 1 mm","offer_id":54540472254797,"sku":"1005006427770026-5 pieces-China Mainland-1mm x 1.5m","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 1 mm","offer_id":54540472287565,"sku":"1005006427770026-50 pieces-China Mainland-1mm x 1.5m","price":48.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 1 mm","offer_id":54540472320333,"sku":"1005006427770026-20 pieces-China Mainland-1mm x 1.5m","price":29.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 2 mm","offer_id":54540472353101,"sku":"1005006427770026-50 pieces-China Mainland-2mm x 1.5m","price":56.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 20 \/ 2 mm","offer_id":54540472385869,"sku":"1005006427770026-20 pieces-China Mainland-2mm x 1.5m","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 2 mm","offer_id":54540472418637,"sku":"1005006427770026-200 pieces-China Mainland-2mm x 1.5m","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 2 mm","offer_id":54540472451405,"sku":"1005006427770026-100 pieces-China Mainland-2mm x 1.5m","price":94.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 2.5 mm","offer_id":54540472484173,"sku":"1005006427770026-2 pieces-China Mainland-2.5mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 2.5 mm","offer_id":54540472516941,"sku":"1005006427770026-1 piece-China Mainland-2.5mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 2.5 mm","offer_id":54540472549709,"sku":"1005006427770026-5 pieces-China Mainland-2.5mm x 1.5m","price":19.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 2.5 mm","offer_id":54540472582477,"sku":"1005006427770026-3 pieces-China Mainland-2.5mm x 1.5m","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 100 \/ 1.5 mm","offer_id":54540472615245,"sku":"1005006427770026-100 pieces-China Mainland-1.5mm x 1.5m","price":89.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 50 \/ 1.5 mm","offer_id":54540472648013,"sku":"1005006427770026-50 pieces-China Mainland-1.5mm x 1.5m","price":53.99,"currency_code":"EUR","in_stock":true},{"title":"1 piece \/ 2 mm","offer_id":54540472680781,"sku":"1005006427770026-1 piece-China Mainland-2mm x 1.5m","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 200 \/ 1.5 mm","offer_id":54540472713549,"sku":"1005006427770026-200 pieces-China Mainland-1.5mm x 1.5m","price":170.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 3 \/ 2 mm","offer_id":54540472746317,"sku":"1005006427770026-3 pieces-China Mainland-2mm x 1.5m","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 2 \/ 2 mm","offer_id":54540472779085,"sku":"1005006427770026-2 pieces-China Mainland-2mm x 1.5m","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 10 \/ 2 mm","offer_id":54540472811853,"sku":"1005006427770026-10 pieces-China Mainland-2mm x 1.5m","price":23.99,"currency_code":"EUR","in_stock":true},{"title":"Pack of 5 \/ 2 mm","offer_id":54540472844621,"sku":"1005006427770026-5 pieces-China Mainland-2mm x 1.5m","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/tresse-a-dessouder-cuivre-pre-fluxee-1-5-m_011c7961-4494-439e-b154-f54e8bbb8e47.png?v=1787318815"},{"product_id":"fer-a-souder-usb-c-portable-8-w","title":"Portable USB-C soldering iron — 8 W, adjustable temperature","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003ePortable USB-C soldering iron: redo a solder joint without getting out the station\u003c\/h2\u003e\n\u003cp\u003eA mod wire that has come loose, a ribbon cable to resolder, a button that no longer responds: the tiny fault that doesn't justify unpacking a full station. This \u003cstrong style=\"color:#0097ac;\"\u003epen-style\u003c\/strong\u003e iron plugs into any \u003cstrong style=\"color:#0097ac;\"\u003eUSB-C 5 V\u003c\/strong\u003e source — phone charger, power bank, PC port — and its \u003cstrong style=\"color:#0097ac;\"\u003etemperature is adjustable\u003c\/strong\u003e. It's a backup tool, not a replacement for a workshop station.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUSB-C power\u003c\/strong\u003e: 5 V, no mains socket or adapter. A power bank is enough to work away from the workbench.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAdjustable temperature\u003c\/strong\u003e: the setting is on the body of the iron, which lets you adapt the heat to a fine wire rather than running everything at maximum.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePocket format\u003c\/strong\u003e: it's held like a pen, handy for visible, accessible joints on a handheld console board or a controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIt doesn't replace a regulated station.\u003c\/strong\u003e The supplier states an 8 W output: that's very little. On a ground plane, shielding or a large power pad, the tip cools faster than it heats and the joint won't take.\u003c\/li\u003e\n  \u003cli\u003eNo temperature sensor or digital display: the setting is approximate, not measured. For recapping or demanding micro-soldering, you need a proper station.\u003c\/li\u003e\n  \u003cli\u003eThe original listing also mentions a 600 mAh internal battery, which the supplier's datasheet doesn't confirm — treat it as an iron powered by a USB-C cable, not as a cordless iron.\u003c\/li\u003e\n  \u003cli\u003eNo solder wire, flux or desoldering braid is guaranteed in the set: plan your own consumables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe tool isn't tied to any console: it suits fine soldering on retro handheld consoles, controllers, arcade sticks and expansion boards — mod wires, ribbon cables, connectors, buttons. It isn't suited to the thick ground masses of home consoles, metal shielding or fine SMD components. For power, you need a \u003cstrong style=\"color:#0097ac;\"\u003eUSB-C 5 V\u003c\/strong\u003e source: a phone charger or a standard power bank.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eYou should know how to solder, at least wires and through-hole joints. This iron doesn't forgive hesitation: at low power, a long joint ends up overheating the area. Have solder wire, flux, a sponge or cleaning ball for the tip, and a helping hand to hold the board — all available in the Workshop section.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 portable USB-C soldering iron with adjustable temperature, in the colour chosen.\u003c\/li\u003e\n  \u003cli\u003eThe supplier's set may include a few accessories depending on the batch; they are not guaranteed. Order separately whatever you actually need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top:8px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Brown","offer_id":54540472910157,"sku":"1005007474070926-BROWN","price":34.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":54540472942925,"sku":"1005007474070926-orange","price":34.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/fer-a-souder-usb-c-portable_4c616623-8cbf-4138-98ff-65da9e87c6e1.png?v=1787320206"},{"product_id":"station-de-soudage-t12-kit-oled","title":"T12 soldering station DIY kit — OLED display, 200 to 480 °C","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eT12 soldering station: heat that holds on large thermal masses\u003c\/h2\u003e\n\u003cp\u003eReplacing the capacitors in a 90s console, fitting an IPS screen ribbon cable, converting a charging port to \u003cstrong style=\"color:#0097ac;\"\u003eUSB-C\u003c\/strong\u003e: the component is almost never the problem, the iron is. This kit is built around \u003cstrong style=\"color:#0097ac;\"\u003eT12 tips\u003c\/strong\u003e, whose heating element and thermocouple are housed in the tip itself, driven by \u003cstrong style=\"color:#0097ac;\"\u003edigital temperature control\u003c\/strong\u003e shown on an OLED display.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eT12 tips\u003c\/strong\u003e: heating and sensor built into the tip, the temperature returns to the set point within a few seconds after contact with a large copper plane.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAdjustable from 200 to 480 °C\u003c\/strong\u003e: set point shown on a 0.96-inch OLED display, stated stability of ±10 °C.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUp to 75 W\u003c\/strong\u003e: 16 to 24 V DC power, the actual power depends on the power supply used.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMetal enclosure\u003c\/strong\u003e: acrylic front panel, so the electronics aren't left bare on the workbench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt isn't a ready-to-use station: the parts arrive as a kit and need assembling.\u003c\/li\u003e\n  \u003cli\u003eThe 16 to 24 V mains power supply isn't included: plan for a 24 V power supply of at least 3 A to get close to 75 W.\u003c\/li\u003e\n  \u003cli\u003eIt isn't a hot air station: no desoldering of BGA packages or removal of multi-pin SMD components.\u003c\/li\u003e\n  \u003cli\u003eIt isn't a desoldering station: to clear a plated through-hole you need a pump or braid, not included.\u003c\/li\u003e\n  \u003cli\u003eThe tip format is fixed: 900M tips from entry-level irons and JBC cartridges don't fit.\u003c\/li\u003e\n  \u003cli\u003eThe contents vary from one SET to another: the variant chosen determines what arrives in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eT12 cartridge tips, 16 to 24 V DC power supply. In the retro workshop: capacitor replacement, fitting IPS screens and ribbon cables, converting a charging port to USB-C, repairing controllers and motherboards. Doesn't work with 900M tips or JBC C245 cartridges.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eAssembly required before first use: screws, wiring and, depending on the SET, a few solder joints on the board. The original instructions are in English or Chinese. Once assembled, it's used like a standard iron: ventilated room, iron stand, tip tinned and wiped.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe kit of parts corresponding to the SET chosen, from SET 1 to SET 4.\u003c\/li\u003e\n  \u003cli\u003eT12 control board with 0.96-inch OLED display.\u003c\/li\u003e\n  \u003cli\u003eMetal enclosure and acrylic panel depending on the SET.\u003c\/li\u003e\n  \u003cli\u003eT12 tip and handle depending on the SET.\u003c\/li\u003e\n  \u003cli\u003eMains power supply not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eListing verified on 19 August 2026. French-speaking customer service, reply within 1 business day.\u003c\/p\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming Accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Kit 1","offer_id":54540473368909,"sku":"1005005545341182-SET 1","price":27.99,"currency_code":"EUR","in_stock":true},{"title":"Kit 3","offer_id":54540473401677,"sku":"1005005545341182-SET 3","price":50.99,"currency_code":"EUR","in_stock":true},{"title":"Kit 2","offer_id":54540473434445,"sku":"1005005545341182-SET 2","price":35.99,"currency_code":"EUR","in_stock":true},{"title":"Kit 4","offer_id":54540473467213,"sku":"1005005545341182-SET 4","price":57.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/station-de-soudage-t12-en-kit-a-monter_b38595d5-cbec-4707-a147-51748780f751.png?v=1787320273"},{"product_id":"station-soudage-2-en-1-fer-air-chaud","title":"2-in-1 soldering station with iron and hot air — SMD, BGA and PCB rework","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003e2-in-1 soldering station: iron and hot air on the same workbench\u003c\/h2\u003e\n\u003cp\u003eA retro mod rarely comes down to a single task. Fitting an \u003cstrong style=\"color:#0097ac;\"\u003eIPS\u003c\/strong\u003e panel calls for a fine-tip iron; removing a ribbon connector, a shield or an \u003cstrong style=\"color:#0097ac;\"\u003eSMD\u003c\/strong\u003e package without tearing off the trace calls for \u003cstrong style=\"color:#0097ac;\"\u003ehot air\u003c\/strong\u003e. This 8898 station combines both tools in a single unit, with temperature setting and readout on a digital display.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwo tools, one plug\u003c\/strong\u003e: soldering iron for joints and through-hole components, hot air blower for surface desoldering. No second device to get out mid-repair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTemperature read, not guessed\u003c\/strong\u003e: the digital display shows the set point and saves you from working \"by feel\", the leading cause of lifted pads on a console board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine work\u003c\/strong\u003e: designed for densely populated boards — SMD, integrated circuits, BGA connectors, controller and handheld PCBs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt won't teach you the technique. Poorly controlled hot air lifts a neighbouring connector or warps a plastic shell: this is not a tool for a first attempt on the console you want to save.\u003c\/li\u003e\n\u003cli\u003eIt comes without consumables: no solder, no flux, no desoldering braid, no anti-static wrist strap.\u003c\/li\u003e\n\u003cli\u003eIt does not replace a professional rework station: reballing a BGA with bottom preheating is beyond its scope.\u003c\/li\u003e\n\u003cli\u003eThe supplier does not detail the exact list of tips and nozzles supplied with the unit. So we make no claim about it.\u003c\/li\u003e\n\u003cli\u003eMains-powered unit: no battery operation, no portable use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eUniversal soldering tool: it works on any board, whatever the machine — handheld and home console motherboards, controllers, arcade PCBs, video adapters, audio modules, USB-C batteries to rewire. There is no \"console compatibility\" to check: the component to be soldered decides the tool, the iron for through-hole and point-to-point work, hot air for SMD and glued ribbon cables. The unit plugs into the mains: check the plug and voltage on receipt before switching it on.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eIntermediate. You should already know how to tin a tip, heat a pad from the side and recognise a cold joint. Hot air adds a difficulty: you need to protect the area around the component with polyimide tape and keep moving. Have a repair mat, helping hands, braid or a desoldering pump, and a ventilated work surface ready. Do your first runs on a scrap board, not on the console you are repairing.\u003c\/p\u003e\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 2-in-1 soldering station with digital display (model 8898, black)\u003c\/li\u003e\n\u003cli\u003e1 soldering iron connected to the station\u003c\/li\u003e\n\u003cli\u003e1 hot air gun connected to the station\u003c\/li\u003e\n\u003cli\u003eAccessories (tips, nozzles): exact contents not confirmed by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Default Title","offer_id":54540474581325,"sku":"1005008460077088-Black-france","price":93.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/station-de-soudage-2-en-1-fer-et-air-chaud_63381b8c-902f-4758-a94d-90df052731c5.png?v=1787314932"},{"product_id":"support-soudure-pcb-broches-magnetiques","title":"PCB soldering holder with magnetic pins — workshop platform","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003ePCB soldering holder: the board stays still, both hands stay free\u003c\/h2\u003e\n\u003cp\u003eResoldering a charging port, replacing a capacitor or fitting a screen ribbon cable on a handheld console requires a board that is perfectly \u003cstrong style=\"color:#0097ac;\"\u003estill\u003c\/strong\u003e. This workshop platform holds the circuit board with \u003cstrong style=\"color:#0097ac;\"\u003emagnetic pins\u003c\/strong\u003e that you place wherever you like, with no clamps or adhesive tape. The \u003cstrong style=\"color:#0097ac;\"\u003erubber feet\u003c\/strong\u003e stop the whole thing from sliding on the workbench.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eRepositionable magnetic hold\u003c\/strong\u003e: the pins sit freely on the platform and can be moved in a second when the board changes orientation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUniversal format\u003c\/strong\u003e: the holder is not tied to a specific console, it holds any board laid flat, from a controller PCB to a home console motherboard.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eStable work surface\u003c\/strong\u003e: rubber feet under the platform, so the board stays at soldering-iron height without being held by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is not an articulated \"helping hands\" arm: no crocodile clips, no magnifier, no iron stand.\u003c\/li\u003e\n  \u003cli\u003eThis is not a heating station or a preheater: the platform does not heat up and should not be used as a surface for prolonged hot air desoldering.\u003c\/li\u003e\n  \u003cli\u003eWatch out for the variants: the \"1pc\" (one colour) and \"4pcs Pins\" options are \u003cstrong\u003epins sold on their own, without the platform\u003c\/strong\u003e. Only \"Only Board\" (platform only) and \"Board With 4 Pins\" (platform + 4 pins) include the platform.\u003c\/li\u003e\n  \u003cli\u003eThe exact dimensions of the platform and the holding force are not provided by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eGeneric workshop tool: it suits any electronic board laid flat — retro handheld console boards, controller boards, home console motherboards, laptop boards. It is not tied to any particular console and provides no electrical compatibility: it simply holds the board. It is not suitable for assemblies already fitted in their shell or for very large boards that would overhang the platform.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo assembly: you place the platform on the workbench, position the pins around the board and solder. The tool is aimed at people who already solder — it makes the job easier, it doesn't teach it. You will need a fine-tip iron, desoldering braid and a screwdriver suited to your console; the electronics work is up to you.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\"1pc\" variant (dark grey, grey, blue or yellow): 1 magnetic pin on its own.\u003c\/li\u003e\n  \u003cli\u003e\"4pcs Pins\" variant: 4 magnetic pins, without platform.\u003c\/li\u003e\n  \u003cli\u003e\"Only Board\" variant: 1 soldering platform on its own, without pins.\u003c\/li\u003e\n  \u003cli\u003e\"Board With 4 Pins\" variant: 1 soldering platform + 4 magnetic pins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top:8px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Charcoal grey (1 piece)","offer_id":54540475138381,"sku":"1005009824161897-1pc Dark grey","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Grey (1 piece)","offer_id":54540475171149,"sku":"1005009824161897-1pc Grey","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Blue (1 piece)","offer_id":54540475203917,"sku":"1005009824161897-1pc Blue","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Set of 4 pins","offer_id":54540475236685,"sku":"1005009824161897-4pcs Pins","price":21.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow (1 piece)","offer_id":54540475269453,"sku":"1005009824161897-1pc Yellow","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Platform and 4 pins","offer_id":54540475302221,"sku":"1005009824161897-Board With 4 Pins","price":35.99,"currency_code":"EUR","in_stock":true},{"title":"Platform only","offer_id":54540475334989,"sku":"1005009824161897-Only Board","price":28.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/support-de-soudure-pcb-a-broches-magnetiques_5b10171b-910a-4c01-a7de-1968e5c2d8b2.png?v=1787314989"},{"product_id":"brosse-antistatique-esd-double-tete","title":"Double-headed ESD anti-static brush — PCB and console cleaning","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eESD anti-static brush: dust a motherboard without zapping it\u003c\/h2\u003e\n\u003cp\u003eAn opened retro console always looks the same: dust packed between the capacitors, flux residue around the pads, a grimy cartridge connector. An ordinary paintbrush builds up charge through friction and releases it onto the components. This brush with \u003cstrong style=\"color:#0097ac;\"\u003eanti-static bristles\u003c\/strong\u003e is used over a \u003cstrong style=\"color:#0097ac;\"\u003ebare PCB\u003c\/strong\u003e and is just as useful for \u003cstrong style=\"color:#0097ac;\"\u003epost-soldering cleanup\u003c\/strong\u003e as for routine maintenance of a collector's machine.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwo heads on a single handle\u003c\/strong\u003e: one end to sweep dry dust off a large area, the other to reach narrow spaces between components.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAnti-static bristles\u003c\/strong\u003e: designed to limit charge build-up while brushing, which a nylon household brush does not do.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePost-soldering cleanup\u003c\/strong\u003e: dislodges softened flux residue and bits of desoldering braid around the pads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eWorkbench size\u003c\/strong\u003e: short handle, fits in a tool pouch next to your screwdrivers and opening tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis is not an anti-static wrist strap. The brush limits charge while you work, it does not ground the board: for sensitive work, keep your earthed wrist strap on.\u003c\/li\u003e\n  \u003cli\u003eIt does not dissolve anything. Hardened flux and traces of corrosion require isopropyl alcohol; the brush only does the mechanical work.\u003c\/li\u003e\n  \u003cli\u003eIt does not replace a blower bulb or a can of compressed air for dust lodged under a heatsink or a shield.\u003c\/li\u003e\n  \u003cli\u003eAvoid using it on screens: the bristles mark anti-glare coatings and polarising films.\u003c\/li\u003e\n  \u003cli\u003eThe supplier does not provide the bristle length, measured resistivity or brand. These values are therefore not on the listing: we do not make them up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eMotherboards and bare PCBs of retro consoles (Game Boy, Mega Drive, Nintendo 64, PlayStation, Dreamcast, Saturn…), modern handheld consoles opened up for a screen or battery replacement, disassembled controllers, cartridge connectors, mechanical keyboards and expansion cards. Not covered: LCD panels, protective glass, painted or varnished shells and anything still powered.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. No soldering, no cutting the shell, no special disassembly beyond opening the machine. Work with the console switched off, unplugged and with the battery disconnected. Brush from the centre outwards so you don't push dust under the shields, then finish with a cotton bud soaked in isopropyl alcohol on greasy areas. It complements a set of precision screwdrivers and opening tools.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 double-headed anti-static brush, in the selected style.\u003c\/li\u003e\n  \u003cli\u003eNo consumables, no cleaning product: the brush is sold on its own.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-consoles-portables\" style=\"color:#0097ac;\"\u003eConsole accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Style 4","offer_id":54540476809549,"sku":"1005009949364996-Style 4","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Hairbrush (1 piece)","offer_id":54540476842317,"sku":"1005009949364996-Hairbrush 1Pcs","price":15.99,"currency_code":"EUR","in_stock":false},{"title":"Style 3","offer_id":54540476875085,"sku":"1005009949364996-Style 3","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/brosse-antistatique-esd-double-tete_a238aab9-4307-4714-9b40-c74bfd709c39.png?v=1787315031"},{"product_id":"tapis-soudure-silicone-antistatique-consoles","title":"Anti-static silicone soldering mat for console repairs","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eSilicone soldering mat: the table protected, the screws where they belong\u003c\/h2\u003e\n\u003cp\u003eOpening a handheld console on the corner of a desk means losing two screws out of three and leaving an iron mark on the furniture. This \u003cstrong style=\"color:#0097ac;\"\u003eflexible silicone\u003c\/strong\u003e mat withstands the heat of the iron, does not build up \u003cstrong style=\"color:#0097ac;\"\u003estatic electricity\u003c\/strong\u003e and keeps every part in its compartment during disassembly.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eProtects the work surface\u003c\/strong\u003e: the silicone withstands solder splashes and brief contact with the tip without marking the desk underneath.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSorts screws by step\u003c\/strong\u003e: the moulded compartments keep shell, board and ribbon cable screws apart — the S-140, S-150 and S-160C models are magnetic as well.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLimits static electricity\u003c\/strong\u003e: the surface does not charge up through friction, unlike a plastic tablecloth or a towel.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCleans with a sponge\u003c\/strong\u003e: silicone absorbs neither flux nor isopropyl alcohol, so a wipe with a cloth is enough between repairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThe \u003cstrong\u003eS-100 model is not magnetic\u003c\/strong\u003e: it has the compartments, not the magnets. If you want the screws to stay put, choose the S-140, S-150 or S-160C.\u003c\/li\u003e\n  \u003cli\u003eThis is not a professional ESD mat: it has no snap fastener, no cord and no grounding wrist strap. It prevents static build-up, it does not discharge it to earth.\u003c\/li\u003e\n  \u003cli\u003eThe supplier does not state a certified maximum temperature. Always put the iron back in its stand: the mat withstands brief contact, not a tip left lying on it.\u003c\/li\u003e\n  \u003cli\u003eThe exact dimensions of each model are not confirmed by the supplier — \u003cstrong\u003eto be confirmed\u003c\/strong\u003e before ordering if you are working in a specific space.\u003c\/li\u003e\n  \u003cli\u003eNo tools are supplied: no screwdriver, no spudger, no soldering iron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe mat does not plug into anything: it serves as a work surface for any disassembly. Retro handheld and home consoles, controllers, motherboards, smartphones, mechanical keyboards. It is just as suitable for replacing an IPS screen as for a simple shell or battery swap.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. It is a workbench accessory: you roll it out, put the console on it and get started. There is nothing to install, nothing to solder, nothing to configure. It is rather the item you buy \u003cem\u003ebefore\u003c\/em\u003e your first repair.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 silicone work mat, in the selected model (S-100, S-140, S-150 or S-160C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-top:8px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"S-160C (magnetic)","offer_id":54540477497677,"sku":"1005008248076684-S-160C(magnetic)","price":44.99,"currency_code":"EUR","in_stock":true},{"title":"S-150 (magnetic)","offer_id":54540477530445,"sku":"1005008248076684-S-150(magnetic)","price":34.99,"currency_code":"EUR","in_stock":true},{"title":"S-140 (magnetic)","offer_id":54540477563213,"sku":"1005008248076684-S-140(magnetic)","price":33.99,"currency_code":"EUR","in_stock":true},{"title":"S-100 (non-magnetic)","offer_id":54540477595981,"sku":"1005008248076684-S-100(No magnetic)","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/tapis-de-soudure-silicone-antistatique-pour-reparation-consoles_888b62e8-2175-4ce2-bab0-586033daf36a.png?v=1787320389"},{"product_id":"soufflette-poussiere-caoutchouc","title":"Rubber dust blower — console and cartridge cleaning","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eDust blower: dislodge dust without moisture or gas\u003c\/h2\u003e\n\u003cp\u003eDust is the number one cause of unreliable contacts on a retro console: a grimy cartridge connector, a clogged vent, particles trapped under the screen lens during reassembly. This \u003cstrong style=\"color:#0097ac;\"\u003emanual rubber blower\u003c\/strong\u003e sends out a jet of \u003cstrong style=\"color:#0097ac;\"\u003edry air\u003c\/strong\u003e with a simple squeeze, \u003cstrong style=\"color:#0097ac;\"\u003ewith no propellant gas or chemicals\u003c\/strong\u003e — unlike blowing with your mouth, which leaves moisture on the contacts.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDry air on demand\u003c\/strong\u003e: squeeze the bulb by hand and it reinflates by itself, with no refills and no canister to buy again.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eZero residue\u003c\/strong\u003e: no cleaning agent, no liquid propellant that could freeze on or stain a screen, a lens or a circuit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine nozzle\u003c\/strong\u003e: aim the jet into a cartridge slot, between the keys of a keyboard, into a vent or onto an optical sensor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt does not replace cleaning the contacts: an oxidised cartridge connector needs isopropyl alcohol and a cotton bud; the blower only removes loose dust.\u003c\/li\u003e\n  \u003cli\u003eIt does not deliver the pressure of a compressor or a can of compressed air: greasy or stuck-on dust will resist.\u003c\/li\u003e\n  \u003cli\u003eIt does not suck. It drives dust out of the device but does not collect it — work with the device tilted, opening facing down.\u003c\/li\u003e\n  \u003cli\u003eIt does not take anything apart: foreign bodies already under a screen lens require opening the shell.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA generic tool with no electronics and no machine-specific parts: home and handheld consoles, cartridge slots, disc drive trays, controllers, mechanical keyboards, vents, screens before reassembly, camera lenses. No console revision is incompatible — however, it doesn't plug into anything and does not replace any disassembly tool.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. No soldering, no disassembly, no cutting. Squeeze the bulb a few centimetres from the area to clean, in short repeated bursts rather than continuously. For a full console clean (opening the shell, contacts, thermal paste), you will also need a suitable screwdriver and isopropyl alcohol.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 manual rubber blower, black\u003c\/li\u003e\n  \u003cli\u003eNo cleaning product, no batteries: the tool works by hand pressure alone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming Accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Black","offer_id":54540491030861,"sku":"1005005842832371-black","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/soufflette-a-poussiere-en-caoutchouc_85010335-e395-4c9e-943e-af6e82e7f7b9.png?v=1787320463"},{"product_id":"pincette-precision-antimagnetique","title":"Anti-Magnetic Precision Tweezers — Straight or Curved Tip","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003ePrecision tweezers: grab a ribbon cable without tearing it\u003c\/h2\u003e\n\u003cp\u003eOpening a retro handheld means handling \u003cstrong style=\"color:#0097ac;\"\u003eribbon cables just a few millimetres wide\u003c\/strong\u003e, tiny screws and components you can lose in a second. These tweezers have a \u003cstrong style=\"color:#0097ac;\"\u003efine tip\u003c\/strong\u003e and an \u003cstrong style=\"color:#0097ac;\"\u003eanti-magnetic\u003c\/strong\u003e body: they grip without magnetising the screws and without crushing the connector. Two profiles to choose from, straight or curved.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFine tip\u003c\/strong\u003e: picks up a ZIF ribbon cable, a button spring, a screw that has fallen into the shell.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAnti-magnetic body\u003c\/strong\u003e: screws do not stick to the tip, they stay where you put them.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwo profiles\u003c\/strong\u003e: straight tip for flat work, curved tip to reach under a shield or behind a connector.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eControlled grip\u003c\/strong\u003e: the flexible body lets you feel the pressure, useful on plastic film or enamelled wire.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThey are not certified anti-static (ESD): anti-magnetic does not mean dissipative. On a motherboard, keep wearing a grounding wrist strap.\u003c\/li\u003e\n  \u003cli\u003eThe material stated by the supplier is contradictory — \"titanium alloy\" on one side, \"nickel-chromium alloy steel\" on the other. We do not settle the question: the exact composition remains \u003cstrong\u003eto be confirmed\u003c\/strong\u003e.\u003c\/li\u003e\n  \u003cli\u003eThis is not a lever: a fine tip bends if you use it to pry off a shell or a battery. Use a spudger.\u003c\/li\u003e\n  \u003cli\u003eA single pair of tweezers is supplied, not a set of several profiles.\u003c\/li\u003e\n  \u003cli\u003eNeither length, weight nor hardness is documented by the supplier: we do not state them.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis is a tool, not a part: it does not get installed on anything. It is useful on anything that opens — retro handheld consoles (Game Boy Advance, Game Boy Color, DS), modern Chinese handhelds (Anbernic, Miyoo, TrimUI, Retroid), controllers, phone motherboards, mechanical keyboards. It does not replace a tri-wing screwdriver or an opening spudger: those two remain essential to get inside.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. The tweezers can be used from your very first teardown. They really come into their own as soon as you work on a screen ribbon cable, a button replacement or soldering: in that case, also have a screwdriver suited to the console, a spudger and a sorting mat for the screws.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 pair of precision tweezers, in the chosen tip profile (straight or curved).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eAccessories \u0026amp; tools\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Curved","offer_id":54540507382093,"sku":"1005009886265850-Bending","price":20.99,"currency_code":"EUR","in_stock":true},{"title":"Straight","offer_id":54540507414861,"sku":"1005009886265850-Straight","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pincette-de-precision-antimagnetique_02eab269-8b35-4350-9468-91392db95146.png?v=1787315325"},{"product_id":"pincette-precision-esd-inox-pointe-fine","title":"ESD precision tweezers — stainless steel, extra-fine tip","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eESD precision tweezers: pick up a 0.5 mm ribbon cable without bending it\u003c\/h2\u003e\n\u003cp\u003eOpening a retro console means handling parts smaller than a fingernail: a screen ribbon cable, a trigger spring, a tri-wing screw that has dropped into the shell. Ordinary tweezers crush them or send them flying. These are \u003cstrong style=\"color:#0097ac;\"\u003estainless steel precision tweezers\u003c\/strong\u003e, with an \u003cstrong style=\"color:#0097ac;\"\u003eextra-fine tip\u003c\/strong\u003e and an \u003cstrong style=\"color:#0097ac;\"\u003eanti-static\u003c\/strong\u003e body, available in twelve tip profiles.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eGrip without crushing\u003c\/strong\u003e: the tips meet along their whole length, so you can hold a ZIF ribbon cable or a connector without marking the copper.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eWork on micro-soldering\u003c\/strong\u003e: the fine tip lets you see the solder joint while you hold the wire or component.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTwelve profiles to choose from\u003c\/strong\u003e: the MTS and CTS references each correspond to a tip shape (straight, angled, more or less fine) — you pick the one that matches the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt doesn't cut. These are not side cutters: to cut a component leg or a wire, you need another tool.\u003c\/li\u003e\n  \u003cli\u003eIt isn't electrically insulated. The body is metal: don't use it on a live board or on a capacitor that hasn't been discharged.\u003c\/li\u003e\n  \u003cli\u003eThe \"anti-static\" claim comes from the manufacturer and has not been measured on our side. It doesn't replace a grounded ESD wrist strap for sensitive work.\u003c\/li\u003e\n  \u003cli\u003eThe supplier doesn't document the exact geometry of each reference: the shape visible in the photos is what counts, to be confirmed for your use.\u003c\/li\u003e\n  \u003cli\u003eAn extra-fine tip bends if you force it. This isn't the tool for prying open a shell or pulling out a soldered battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eIt's a tool, not a part: it doesn't fit onto anything and suits every workshop job — retro handheld consoles, controllers, motherboards, IPS screen installation, battery replacement, connector cleaning. No console is excluded. Equally, no console is included: you are buying the tweezers alone.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNone. The tweezers are useful from your very first teardown. They really come into their own once you touch a screen ribbon cable or do micro-soldering: keep a set of precision screwdrivers, an opening spudger and, for board work, a grounded anti-static wrist strap to hand.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 pair of stainless steel precision tweezers, in the tip reference chosen from the menu.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming Accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"MTS-6B","offer_id":54540508463437,"sku":"1005006302496553-MTS-6B","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"MTS-15","offer_id":54540508496205,"sku":"1005006302496553-MTS-15","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"MTS-18","offer_id":54540508528973,"sku":"1005006302496553-MTS-18","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"MTS-19","offer_id":54540508561741,"sku":"1005006302496553-MTS-19","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"MTS-6A","offer_id":54540508594509,"sku":"1005006302496553-MTS-6A","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-6A","offer_id":54540508627277,"sku":"1005006302496553-CTS-6A","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-6B","offer_id":54540508660045,"sku":"1005006302496553-CTS-6B","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"MTS-12","offer_id":54540508692813,"sku":"1005006302496553-MTS-12","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-18","offer_id":54540508725581,"sku":"1005006302496553-CTS-18","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-19","offer_id":54540508758349,"sku":"1005006302496553-CTS-19","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-12","offer_id":54540508791117,"sku":"1005006302496553-CTS-12","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"CTS-15","offer_id":54540508823885,"sku":"1005006302496553-CTS-15","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pincette-de-precision-esd_aa2d787f-3f1f-41b0-a95f-6d9a4cd505f9.png?v=1787319787"},{"product_id":"ventouse-atelier-55-mm-ecrans-coques","title":"Workshop suction cup 55 mm — screen and shell removal","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eWorkshop suction cup 55 mm: open a screen without marking the shell\u003c\/h2\u003e\n\u003cp\u003eOpening a handheld console or replacing a display almost always starts with the same risky move: sliding a blade under the glass and prying. This \u003cstrong style=\"color:#0097ac;\"\u003e55 mm suction cup\u003c\/strong\u003e tackles the problem the other way round — it pulls vertically on the smooth surface and creates the gap that the opening picks will then slip into. The result: fewer \u003cstrong style=\"color:#0097ac;\"\u003emarks on the shell\u003c\/strong\u003e and less warped plastic.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eVertical pull\u003c\/strong\u003e: the suction cup pulls the screen upwards instead of forcing against the edge of the shell, where the plastic breaks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003e55 mm diameter\u003c\/strong\u003e: wide enough to hold on a handheld console display, a replacement screen or a phone's glass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eOne piece, reusable\u003c\/strong\u003e: nothing to assemble, nothing to adjust, no consumables to buy again after the job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt doesn't heat and doesn't dissolve adhesive: on a glued screen, you first need to soften the glue, otherwise the suction cup comes off.\u003c\/li\u003e\n  \u003cli\u003eIt won't hold on a matt, grainy, porous or perforated surface — textured shell, speaker grille, frosted plastic.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't replace opening picks, spudgers or screwdrivers: it opens the gap, it doesn't take anything apart on its own.\u003c\/li\u003e\n  \u003cli\u003eOn glass that is already cracked, the suction can make the damage worse. Apply adhesive film to the screen before pulling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eAny smooth, flat, non-porous surface with at least 6 cm of clearance: displays of retro and modern handheld consoles, replacement screens supplied as kits, phone and tablet glass, glass or acrylic panels. Not suitable for matt or textured shells, perforated faces, or tightly curved surfaces, where no vacuum can form.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eBeginner. No soldering, no cutting. Keep to hand a set of screwdrivers suited to the device (Phillips, tri-wing or Y depending on the model), opening picks or thin spudgers to release the clips once the gap is open, and a gentle heat source if the screen is held with adhesive.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 removal suction cup, 55 mm, in the chosen colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/accessoires-gaming\" style=\"color:#0097ac;\"\u003eGaming Accessories\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Black","offer_id":54540508266829,"sku":"1005006060973030-black","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Blue","offer_id":54540508299597,"sku":"1005006060973030-blue","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Yellow","offer_id":54540508332365,"sku":"1005006060973030-sucker yellow","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Orange","offer_id":54540508365133,"sku":"1005006060973030-sucker orange","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":54540508397901,"sku":"1005006060973030-sucker red","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/ventouse-d-atelier-55-mm_ed1d40b5-5eb5-4c8f-a27d-5bdcd2118e98.png?v=1787319840"},{"product_id":"pince-coupante-precision-coupe-a-ras","title":"Precision side cutters — flush cut for soldering and modding","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003ePrecision side cutters: the lead drops off flush with the board\u003c\/h2\u003e\u003cp\u003eAfter soldering, there's always a bit of lead sticking out. On a console motherboard, that stub catches on the shell, touches a ribbon cable or rubs against a battery. These \u003cstrong style=\"color:#0097ac;\"\u003eflush-cut\u003c\/strong\u003e cutters snip the lead level with the joint, with a \u003cstrong style=\"color:#0097ac;\"\u003eslim nose\u003c\/strong\u003e that fits between components. They're also handy for \u003cstrong style=\"color:#0097ac;\"\u003emod wiring\u003c\/strong\u003e and for cleaning up 3D print supports.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eFlush cut\u003c\/strong\u003e: one face of the blade stays flat, so the lead is cut as close to the solder as possible instead of leaving a two-millimetre stub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSlim nose\u003c\/strong\u003e: the tip fits between tightly packed components, where an electrician's side cutters won't go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eThree workbench uses\u003c\/strong\u003e: through-hole component leads, flexible hook-up wire for a screen or battery mod, supports and sprues from a 3D print.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eNo learning curve\u003c\/strong\u003e: a hand tool, no power supply or adjustment, usable from your very first teardown.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoesn't cut hard metals. Steel wire, piano wire, springs, nails: the blade chips and the tool is ruined. It's made for copper, solder and component leads.\u003c\/li\u003e\n\u003cli\u003eDoesn't strip wires. It cuts the insulation and the conductor together: to prepare a wire, you need wire strippers.\u003c\/li\u003e\n\u003cli\u003eIsn't a cable cutter. For anything thicker than thin hook-up wire, use heavy-duty cutters.\u003c\/li\u003e\n\u003cli\u003eThe handles are not insulated for live work. Always cut on an unplugged device.\u003c\/li\u003e\n\u003cli\u003eThe supplier doesn't state the maximum cutting capacity, the exact blade material or the hardness. We don't make them up.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eNo model restrictions: it's a workbench tool, not a spare part. It goes with any open-heart job — Game Boy, Game Boy Advance, DS, PSP, PS1, PS2, Dreamcast, Anbernic, Miyoo or TrimUI handheld consoles, controllers, PC boards and Raspberry Pi. It doesn't plug into anything and doesn't fit inside any console.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\u003cp\u003eBeginners welcome. Always cut after soldering, never before, and hold the offcut with a finger or fine tweezers: a snipped lead flies off fast and can reach an eye — safety glasses remain good practice. Work on an unplugged device, with capacitors discharged on a home console. Alongside these cutters, keep a soldering iron, desoldering braid and the right screwdriver for your device.\u003c\/p\u003e\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 pair of precision side cutters\u003c\/li\u003e\u003c\/ul\u003e\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Default Title","offer_id":54540508954957,"sku":"1005007465091242-Default Title","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/pince-coupante-de-precision_e7c017a2-0ed2-4bf2-ac05-1bb2e6be3223.png?v=1787315410"},{"product_id":"kit-ebavurage-manuel-lames-rotatives","title":"Manual deburring kit — rotating blades for plastic and metal","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eManual deburring kit: clean cut edges, without a file or craft knife\u003c\/h2\u003e\n\u003cp\u003eWhen you open a shell to fit an \u003cstrong style=\"color:#0097ac;\"\u003eIPS screen\u003c\/strong\u003e, enlarge a screen window or rework a 3D-printed part, there's always a burr left on the cut edge. This manual deburring kit is made for exactly that: you run the blade along the edge and it removes the excess in one stroke. It's the \u003cstrong style=\"color:#0097ac;\"\u003efinishing\u003c\/strong\u003e tool you're missing after the dremel and before reassembly.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it does\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eRotating blades\u003c\/strong\u003e: the head swivels and follows the edge, straight or curved, without jamming in the corner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePlastic and metal\u003c\/strong\u003e: designed for plastic, aluminium, copper, steel and wood — so an ABS shell just as well as an aluminium plate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMetal handle\u003c\/strong\u003e: metal body, interchangeable blades, bit supplied for cleaning up the inside of a drilled hole.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eWhat it doesn't do\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIt isn't a cutting tool: it removes a burr, it doesn't make the screen window or open up a port.\u003c\/li\u003e\n  \u003cli\u003eIt doesn't sand or polish — for a perfectly smooth surface, you then need fine-grit sandpaper.\u003c\/li\u003e\n  \u003cli\u003eNo motor, no battery: it's an entirely manual tool.\u003c\/li\u003e\n  \u003cli\u003eIt isn't a toy and the blades are sharp: keep out of reach of children.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA generic workshop tool, independent of any console. It works on handheld console shells (Game Boy Advance, Game Boy Advance SP, Anbernic, Miyoo, TrimUI consoles), 3D prints, aluminium plates and cut circuit boards. It isn't designed for any particular model: it's the material that matters, not the device.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eSkill level required\u003c\/h3\u003e\n\u003cp\u003eNo soldering, no electronic disassembly. You get the hang of the tool in a few minutes: tilt the blade at 45° to the edge and pull it towards you, gently, in several passes rather than a single one. Have gloves and a low-angle light to see the burr. Exact kit contents and number of blades to be confirmed.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 manual deburring tool with metal handle\u003c\/li\u003e\n  \u003cli\u003eInterchangeable rotating deburring blades (quantity to be confirmed)\u003c\/li\u003e\n  \u003cli\u003e1 edge-finishing bit\u003c\/li\u003e\n  \u003cli\u003e1 storage pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eDelivery in 10 to 18 days · ships within 3 to 5 days · 2-year legal guarantee of conformity · 14-day returns.\u003c\/p\u003e\n\u003cp\u003eRead before ordering: \u003ca href=\"https:\/\/fun-esports.com\/en\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eWorkshop \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Deburring kit B","offer_id":54540509053261,"sku":"1005005422079340-Deburring Tool Kit B","price":16.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/kit-d-ebavurage-manuel_1d9147b8-d363-42b5-af15-535d328dbaa9.png?v=1787319902"},{"product_id":"jeu-6-pincettes-precision-inox","title":"Jeu de 6 pincettes de précision en acier inoxydable — pointes droites et incurvées","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eSix pincettes, parce que la bonne dépend de l'angle\u003c\/h2\u003e\n\u003cp\u003eUne pincette droite ne sert à rien pour attraper un composant logé contre un bord ; une pincette courbe est inutilisable pour maintenir une pièce à plat pendant une soudure. Ce jeu réunit \u003cstrong style=\"color:#0097ac;\"\u003esix profils\u003c\/strong\u003e — \u003cstrong style=\"color:#0097ac;\"\u003edroit, courbe, plat, très fin\u003c\/strong\u003e — en acier inoxydable, pour couvrir les gestes d'un démontage entier sans changer d'outil trois fois.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSix profils complémentaires\u003c\/strong\u003e : la pointe droite pour les vis, la courbe pour les zones encastrées, la plate pour tenir une nappe sans la plier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAcier inoxydable\u003c\/strong\u003e : pas de rouille dans un tiroir d'atelier, un ressort stable à l'usage normal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUn seul achat\u003c\/strong\u003e : plus de démontage interrompu faute du bon angle de prise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLa mention antistatique est celle du fabricant : nous ne l'avons pas mesurée. Sur composants sensibles, le vrai garde-fou est un bracelet relié à la terre.\u003c\/li\u003e\n\u003cli\u003ePointes métalliques : elles rayent un plastique visible et conduisent la chaleur d'une panne de fer.\u003c\/li\u003e\n\u003cli\u003eNe remplacent ni une pince coupante ni une pince à dénuder.\u003c\/li\u003e\n\u003cli\u003eAucune n'est en céramique : pour travailler au contact direct d'une panne chaude, il faut une pincette céramique, vendue à part.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eToute intervention d'atelier sur console, manette ou carte électronique : vis de coque, nappes, connecteurs, ressorts, composants de petite taille. Sans distinction de machine ni d'époque.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune compétence particulière. La seule discipline à tenir : ne jamais faire levier avec les pointes. Une pincette désalignée ne se régle pas et devient inutilisable sur les petites pièces, qui sont précisément celles pour lesquelles on l'a achetée.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6 pincettes de précision en acier inoxydable, profils assortis — droits, courbes et plats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/reparation-restauration\" style=\"color:#0097ac;\"\u003eRéparation \u0026amp; restauration\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Noir \/ Jeu de 6 pincettes","offer_id":54771820593485,"sku":"1005006996901997-Black-6 Pieces","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/Se192df43fed646b8ac41e7079a8abc88G.webp?v=1789663048"},{"product_id":"kit-demontage-consoles-portables","title":"Kit de démontage de consoles portables — tournevis, spatules et médiators d'ouverture","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eKit de démontage : les tournevis et ce qui va avec\u003c\/h2\u003e\n\u003cp\u003eUn tournevis ouvre les vis, pas la coque. Une fois les vis sorties, les deux demi-coques restent tenues par des \u003cstrong style=\"color:#0097ac;\"\u003eclips\u003c\/strong\u003e qu'il faut dégager sans marquer le plastique — et c'est là que la plupart des démontages laissent une trace définitive. Ce kit réunit les \u003cstrong style=\"color:#0097ac;\"\u003etournevis\u003c\/strong\u003e, les \u003cstrong style=\"color:#0097ac;\"\u003espatules\u003c\/strong\u003e et les \u003cstrong style=\"color:#0097ac;\"\u003emédiators d'ouverture\u003c\/strong\u003e dans une seule pochette.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLes tournevis propriétaires\u003c\/strong\u003e : tri-wing à trois ailes pour la coque, cruciforme fin pour la carte mère.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLes médiators en plastique\u003c\/strong\u003e : ils dégagent les clips sans laisser la marque blanche qu'un tournevis plat grave définitivement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLes spatules métal\u003c\/strong\u003e : pour glisser sous une nappe collée ou décoller un blindage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN'ouvre pas les cartouches ni les coques de consoles de salon 8 et 16 bits : celles-ci demandent un embout de sécurité 3,8 ou 4,5 mm, absent de ce kit.\u003c\/li\u003e\n\u003cli\u003eLa composition exacte varie d'un lot fournisseur à l'autre : le nombre de pièces et les diamètres de tri-wing ne sont pas garantis à l'unité près.\u003c\/li\u003e\n\u003cli\u003eNe contient ni fer à souder, ni pincette de précision, ni multimètre.\u003c\/li\u003e\n\u003cli\u003eOutillage d'entrée de gamme : suffisant pour un démontage occasionnel, pas pour un usage quotidien en atelier.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eCoques de consoles portables à vis tri-wing : Game Boy Advance SP, DS, DS Lite, DSi, 3DS, ainsi que les consoles portables modernes. Les spatules et médiators conviennent à tout boîtier à clips, console de salon comprise. Ne couvre pas les vis de sécurité cylindriques 3,8 et 4,5 mm des cartouches et des consoles 8 et 16 bits.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. La difficulté n'est pas dans les vis mais dans les clips : progresser lentement autour du boîtier, laisser un médiator en place derrière soi pour que le clip déjà libéré ne se referme pas. Comptez vingt à quarante minutes pour un premier démontage.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTournevis tri-wing et cruciformes de précision\u003c\/li\u003e\n\u003cli\u003eMédiators d'ouverture en plastique\u003c\/li\u003e\n\u003cli\u003eSpatules métal fines\u003c\/li\u003e\n\u003cli\u003ePochette de rangement, coloris orange ou bleu selon la variante\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/kits-demontage\" style=\"color:#0097ac;\"\u003eKits de démontage\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Orange","offer_id":54771820757325,"sku":"1005006781143512-Orange","price":18.99,"currency_code":"EUR","in_stock":true},{"title":"Bleu","offer_id":54771820790093,"sku":"1005006781143512-Blue","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/S910ac7fccb444f6ab034c0ded9df86b59.webp?v=1789663049"},{"product_id":"kit-reparation-multi-consoles-tournevis","title":"Kit de réparation multi-consoles — tournevis de précision, spatules et médiators","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eUn seul kit pour une collection entière\u003c\/h2\u003e\n\u003cp\u003eQuand on ne répare qu'une machine, on achète un embout. Quand on a une étagère de consoles — une portable à clapet, une console de salon 16 bits, une machine à disque — chaque boîtier demande une \u003cstrong style=\"color:#0097ac;\"\u003eempreinte différente\u003c\/strong\u003e. Ce kit couvre l'éventail : \u003cstrong style=\"color:#0097ac;\"\u003etri-wing\u003c\/strong\u003e, \u003cstrong style=\"color:#0097ac;\"\u003ecruciformes de précision\u003c\/strong\u003e, \u003cstrong style=\"color:#0097ac;\"\u003eTorx\u003c\/strong\u003e, plus les spatules et les médiators.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePlusieurs familles d'empreintes\u003c\/strong\u003e : tri-wing à trois ailes, cruciformes PH000 et PH00, Torx, plat de précision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLes outils d'ouverture\u003c\/strong\u003e : médiators en plastique et spatules métal, pour les clips et les nappes collées.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eUn seul rangement\u003c\/strong\u003e : l'ensemble tient dans une pochette, ce qui évite les cinq commandes séparées et les outils égarés.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eN'ouvre pas les cartouches ni les coques de consoles de salon 8 et 16 bits : ces vis de sécurité cylindriques 3,8 et 4,5 mm ne figurent pas dans ce kit.\u003c\/li\u003e\n\u003cli\u003eLa composition exacte varie d'un lot fournisseur à l'autre : nous annonçons les familles d'outils, pas un décompte pièce par pièce.\u003c\/li\u003e\n\u003cli\u003eNe contient ni fer à souder, ni multimètre, ni pincette de précision.\u003c\/li\u003e\n\u003cli\u003eOutillage d'entrée de gamme : les pointes les plus fines s'usent si on les emploie tous les jours.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eCoques de consoles portables à vis tri-wing et à vis cruciformes de précision : Game Boy Advance SP, DS, DS Lite, DSi, 3DS, PSP. Coques et lecteurs de consoles de salon à vis Torx ou cruciformes, dont GameCube et machines à disque. Les médiators et spatules conviennent à tout boîtier à clips. Ne couvre pas les vis de sécurité 3,8 et 4,5 mm.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. Un démontage complet demande surtout de la méthode : photographier chaque étape, trier les vis par longueur dans des compartiments séparés, et ne jamais forcer sur un clip qui résiste — il y a presque toujours une vis oubliée sous une étiquette ou un patin.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTournevis de précision : tri-wing, cruciformes, Torx, plat\u003c\/li\u003e\n\u003cli\u003eMédiators d'ouverture en plastique\u003c\/li\u003e\n\u003cli\u003eSpatules métal fines\u003c\/li\u003e\n\u003cli\u003ePochette de rangement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/kits-demontage\" style=\"color:#0097ac;\"\u003eKits de démontage\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/reparation-restauration\" style=\"color:#0097ac;\"\u003eRéparation \u0026amp; restauration\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Kit complet","offer_id":54771820888397,"sku":"1005006332144087-1Set","price":20.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/S6e53d68df5e04da585263070d69d467dD.webp?v=1789663049"},{"product_id":"spatule-ouverture-acier-ultra-fine","title":"Spatule d'ouverture en acier ultra fine — écrans collés et coques à clips","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eUne lame assez fine pour passer là où rien ne passe\u003c\/h2\u003e\n\u003cp\u003eEntre une dalle collée et son châssis, l'espace se compte en \u003cstrong style=\"color:#0097ac;\"\u003edixièmes de millimètre\u003c\/strong\u003e. Un tournevis plat n'y entre pas ; un cutter y entre et coupe la nappe. Cette lame d'acier \u003cstrong style=\"color:#0097ac;\"\u003esouple et incurvée\u003c\/strong\u003e se glisse dans la jointure, répartit l'effort sur toute sa longueur et décolle progressivement au lieu de lever d'un seul point.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eSépare un écran collé\u003c\/strong\u003e : l'épaisseur réduite permet d'entrer dans une jointure qu'aucun outil épais n'atteint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDécolle une nappe ou un blindage\u003c\/strong\u003e : la souplesse de la lame épouse la surface au lieu de la marquer ponctuellement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eOuvre une coque à clips\u003c\/strong\u003e sur les faces cachées, là où une trace éventuelle ne se verra pas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eC'est un outil métallique : sur une face visible, il laisse une marque. Pour une coque apparente, utiliser un médiator en plastique.\u003c\/li\u003e\n\u003cli\u003eNe remplace aucun tournevis : les vis doivent être sorties avant, sans quoi la lame plie pour rien.\u003c\/li\u003e\n\u003cli\u003eNe chauffe pas : sur un adhésif très résistant, il faut d'abord ramollir la colle avec une source de chaleur douce, non fournie.\u003c\/li\u003e\n\u003cli\u003eLame fine et souple : elle se voile définitivement si on s'en sert comme d'un levier rigide.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eTout boîtier à dalle collée ou à clips : consoles portables modernes, écrans de remplacement, coques de manettes, blindages de carte mère. Utile aussi sur téléphones et tablettes, dont elle vient à l'origine. Sans objet sur les consoles 8 et 16 bits, dont les boîtiers s'ouvrent entièrement à la vis.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. La règle : entrer à plat, jamais de chant, et avancer par petits déplacements latéraux plutôt que par un mouvement de levier. Si la lame résiste, c'est qu'une vis reste en place ou que la colle n'est pas assez chaude.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 spatule d'ouverture en acier, lame ultra fine et incurvée.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Default Title","offer_id":54771820986701,"sku":"1005008326710240-Default Title","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/S466eaf08730949a598f9154d20ea95eeg.webp?v=1789663050"},{"product_id":"lames-ouverture-inox-souples","title":"Lames d'ouverture en acier inoxydable — à l'unité, par 3 ou par 6, souples et ultra fines","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003ePlusieurs lames, parce qu'une seule ne suffit jamais\u003c\/h2\u003e\n\u003cp\u003eDécoller un écran demande de \u003cstrong style=\"color:#0097ac;\"\u003elaisser une lame en place\u003c\/strong\u003e pendant qu'on travaille plus loin : sans cela, la colle se recolle derrière l'outil aussi vite qu'il avance. Ce lot réunit \u003cstrong style=\"color:#0097ac;\"\u003eplusieurs profils\u003c\/strong\u003e — droit, incurvé, pointu — en acier inoxydable \u003cstrong style=\"color:#0097ac;\"\u003esouple et ultra fin\u003c\/strong\u003e, disponibles par trois ou par six.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTravailler à plusieurs lames\u003c\/strong\u003e : on en laisse une engagée pour empêcher la colle de reprendre derrière soi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePlusieurs profils\u003c\/strong\u003e : une lame droite pour les longs côtés, une incurvée pour les angles, une pointue pour amorcer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAcier inoxydable\u003c\/strong\u003e : pas de rouille dans un tiroir d'atelier, et une lame qui reprend sa forme après flexion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCe sont des outils métalliques : ils marquent une coque visible. Pour une face apparente, utiliser un médiator en plastique.\u003c\/li\u003e\n\u003cli\u003eNe remplacent aucun tournevis : les vis doivent être sorties avant toute tentative d'ouverture.\u003c\/li\u003e\n\u003cli\u003eNe chauffent pas : un adhésif résistant demande une source de chaleur douce, non fournie.\u003c\/li\u003e\n\u003cli\u003eLa composition du lot varie selon la variante : le détail des profils n'est pas garanti à la lame près.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eTout boîtier à dalle collée ou à clips : consoles portables modernes, écrans de remplacement, coques de manettes, blindages, nappes collées. Convient aussi aux téléphones et tablettes. Sans objet sur les consoles 8 et 16 bits, dont les boîtiers s'ouvrent entièrement à la vis.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. Entrer à plat, jamais de chant, avancer par déplacements latéraux et non par effet de levier. Laisser une lame engagée derrière soi à chaque progression. Si une lame résiste, chercher la vis oubliée avant d'augmenter la force.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelon la variante choisie : 3 ou 6 lames d'ouverture en acier inoxydable, profils assortis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"6 lames — lot assorti","offer_id":54771821019469,"sku":"1005009426340672-Mixed--6pcs","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"6 lames — lames seules","offer_id":54771821052237,"sku":"1005009426340672-Only Blade-6pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"6 lames — emballage d'origine, notice EN","offer_id":54771821085005,"sku":"1005009426340672-English Pack-6pcs","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"3 lames — lot assorti","offer_id":54771821117773,"sku":"1005009426340672-Mixed--3pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"6 lames — emballage d'origine, notice CN","offer_id":54771821150541,"sku":"1005009426340672-Chinese Pack-6pcs","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"3 lames — emballage d'origine, notice EN","offer_id":54771821183309,"sku":"1005009426340672-English Pack-3pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"3 lames — lames seules","offer_id":54771821216077,"sku":"1005009426340672-Only Blade-3pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"1 lame — emballage d'origine, notice EN","offer_id":54771821248845,"sku":"1005009426340672-English Pack","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"3 lames — emballage d'origine, notice CN","offer_id":54771821281613,"sku":"1005009426340672-Chinese Pack-3pcs","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"1 lame — lame seule","offer_id":54771821314381,"sku":"1005009426340672-Only Blade","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"1 lame — emballage d'origine, notice CN","offer_id":54771821347149,"sku":"1005009426340672-Chinese Pack","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/S8e0f5738b8a6454cab229dcf044344e8V.webp?v=1789663050"},{"product_id":"leviers-ouverture-acier-ultra-fin","title":"Leviers d'ouverture en acier ultra fin — à l'unité ou en jeu de 4 ou 7 profils","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eLe bon profil plutôt que le bon outil\u003c\/h2\u003e\n\u003cp\u003eSur un démontage, ce n'est pas la force qui manque mais l'\u003cstrong style=\"color:#0097ac;\"\u003eangle d'attaque\u003c\/strong\u003e. Une nappe collée sous un blindage, une batterie maintenue par un adhésif double face, un connecteur à soulever à plat : chaque situation demande une \u003cstrong style=\"color:#0097ac;\"\u003eforme de lame différente\u003c\/strong\u003e. Ces leviers en acier ultra fin se prennent à l'unité ou en jeu de quatre ou sept profils.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePlusieurs profils\u003c\/strong\u003e : pointe droite, pointe courbe, lame large, crochet — selon ce qu'il faut soulever ou décoller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eÉpaisseur réduite\u003c\/strong\u003e : passe sous une nappe ou un blindage là où un tournevis plat ne rentre pas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eVente à l'unité\u003c\/strong\u003e : on remplace le seul profil qui manque ou qui s'est tordu.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutils métalliques : ils marquent une coque visible. Pour une face apparente, utiliser un médiator en plastique.\u003c\/li\u003e\n\u003cli\u003eNe remplacent aucun tournevis : les vis doivent être sorties avant.\u003c\/li\u003e\n\u003cli\u003eNe conviennent pas au levage d'une batterie lithium gonflée : une lame métallique qui perce une cellule déclenche un incendie.\u003c\/li\u003e\n\u003cli\u003eLa correspondance entre un numéro de style et une forme précise n'est pas garantie d'un lot fournisseur à l'autre.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eConsoles portables modernes, manettes, écrans de remplacement, blindages de carte mère, nappes et connecteurs à pression. Utile aussi sur téléphones et tablettes. Sans objet sur les consoles 8 et 16 bits, dont les boîtiers s'ouvrent entièrement à la vis.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. Sur un connecteur à pression, soulever par les deux côtés en alternance et à plat, jamais par un seul coin : c'est ainsi que les nappes se déchirent. Sur un adhésif, chauffer doucement avant d'insister.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelon la variante choisie : 1 levier d'un profil donné, un jeu de 4 profils, ou un jeu de 7 profils.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/reparation-restauration\" style=\"color:#0097ac;\"\u003eRéparation \u0026amp; restauration\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"1 levier — profil B","offer_id":54771821510989,"sku":"1005008095805032-1pc Style B","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"1 levier — profil C","offer_id":54771821543757,"sku":"1005008095805032-1pc Style C","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Jeu de 7 profils","offer_id":54771821576525,"sku":"1005008095805032-7pcs Different Style","price":22.99,"currency_code":"EUR","in_stock":true},{"title":"1 levier — profil A","offer_id":54771821609293,"sku":"1005008095805032-1pc Style A","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Jeu de 4 profils","offer_id":54771821642061,"sku":"1005008095805032-4pcs Different Style","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/S6f8bd85387094de79653f4a90beb2b9bK.webp?v=1789663051"},{"product_id":"mediators-ouverture-metal-lot-10-20-50","title":"Médiators d'ouverture en métal — lot de 10, 20 ou 50","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eDes médiators qu'on laisse en place, pas qu'on manipule\u003c\/h2\u003e\n\u003cp\u003eLe rôle d'un médiator d'ouverture n'est pas de forcer : c'est de \u003cstrong style=\"color:#0097ac;\"\u003erester coincé dans la jointure\u003c\/strong\u003e pour empêcher la colle de reprendre pendant qu'on travaille plus loin. Sur un grand écran, il en faut \u003cstrong style=\"color:#0097ac;\"\u003esix à huit simultanément\u003c\/strong\u003e. Ce lot en propose 10, 20 ou 50, en métal fin.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eMaintiennent la jointure ouverte\u003c\/strong\u003e : placés au fur et à mesure, ils empêchent l'adhésif de se recoller derrière l'outil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePlus fins qu'un médiator plastique\u003c\/strong\u003e : ils entrent dans une jointure fermée où le plastique bute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eQuantité utile\u003c\/strong\u003e : ces outils se perdent, se tordent et s'oublient dans l'appareil. En avoir vingt change la façon de travailler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCe sont des médiators métalliques\u003c\/strong\u003e : ils marquent le plastique et le métal brossé. Sur une coque visible, il faut un médiator en plastique, pas celui-ci.\u003c\/li\u003e\n\u003cli\u003eNe remplacent aucun tournevis : les vis doivent être sorties avant.\u003c\/li\u003e\n\u003cli\u003eNe chauffent pas : sur un adhésif résistant, il faut d'abord ramollir la colle.\u003c\/li\u003e\n\u003cli\u003eNe conviennent pas au levage d'une batterie lithium : une lame métallique qui perce une cellule déclenche un incendie.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eConsoles portables modernes à dalle collée, écrans de remplacement, coques à clips, téléphones et tablettes. Sans objet sur les consoles 8 et 16 bits, dont les boîtiers s'ouvrent entièrement à la vis et sans adhésif.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure. La méthode : amorcer la jointure avec une lame fine, glisser un médiator, avancer de deux ou trois centimètres, en glisser un autre, et ainsi de suite jusqu'à faire le tour. Ne jamais insérer un médiator plus profond que l'épaisseur de l'adhésif, sous peine de couper une nappe.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelon la variante choisie : 10, 20 ou 50 médiators d'ouverture en métal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/reparation-restauration\" style=\"color:#0097ac;\"\u003eRéparation \u0026amp; restauration\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"50 médiators","offer_id":54771821674829,"sku":"1005007539874563-50PCS","price":17.99,"currency_code":"EUR","in_stock":true},{"title":"20 médiators","offer_id":54771821707597,"sku":"1005007539874563-20PCS","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"10 médiators","offer_id":54771821740365,"sku":"1005007539874563-10PCS","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/Scf6060222e2948f286bf365940b110c2G.webp?v=1789663051"},{"product_id":"pincette-antistatique-precision-13-cm","title":"Pincette de précision antistatique 13 cm — pointes fines pour composants et nappes","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eAttraper ce que les doigts ne tiennent pas\u003c\/h2\u003e\n\u003cp\u003eUne vis de coque de console portable mesure trois millimètres. Une nappe se plie définitivement si on la pince mal. Un condensateur de remplacement se pose à un dixième près pendant que l'autre main tient le fer. Dans ces trois cas, l'outil qui manque n'est pas un tournevis mais une \u003cstrong style=\"color:#0097ac;\"\u003epincette à pointes fines\u003c\/strong\u003e, ici en \u003cstrong style=\"color:#0097ac;\"\u003e13 cm\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003ePointes fines et alignées\u003c\/strong\u003e : elles se rejoignent sans décalage, ce qui permet de saisir une vis de 3 mm sans la faire sauter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLongueur 13 cm\u003c\/strong\u003e : assez longue pour atteindre le fond d'un boîtier, assez courte pour rester précise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eAcier inoxydable\u003c\/strong\u003e : pas de rouille dans un tiroir d'atelier, et un ressort qui ne se déforme pas à l'usage normal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLa mention antistatique est celle du fabricant : nous ne l'avons pas mesurée. Pour une intervention sur composants sensibles, un bracelet antistatique relié à la terre reste le vrai garde-fou.\u003c\/li\u003e\n\u003cli\u003ePointes métalliques : elles rayent une surface plastique visible et conduisent la chaleur si on les approche d'un fer.\u003c\/li\u003e\n\u003cli\u003eNe remplace pas une pince coupante ni une pince à dénuder.\u003c\/li\u003e\n\u003cli\u003ePointes fines : elles se désalignent définitivement si on s'en sert comme d'un levier.\u003c\/li\u003e\n\u003cli\u003eLivré sans console et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003eToute intervention d'atelier : vis de coque, nappes, connecteurs, composants de petite taille, ressorts de gâchette, joints. Utile sur consoles de salon comme sur portables, anciennes ou modernes. Longueur 13 cm, pointes droites.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune compétence particulière. Deux réflexes utiles : ne jamais forcer sur les pointes, qui perdent leur alignement, et poser la pincette pointes en l'air plutôt que sur l'établi, où elles s'émoussent.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 pincette de précision en acier inoxydable, pointes droites, longueur 13 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/outils-atelier\" style=\"color:#0097ac;\"\u003eOutils d'atelier\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"Argent \/ 1 pincette \/ 13 cm","offer_id":54771821805901,"sku":"1005010487276808-Silver-1PC-13cm-China Mainland","price":15.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/Sdb7cf46179574312ba37283b10f0fe9am.webp?v=1789663051"},{"product_id":"embouts-gamebit-3-8-4-5-mm","title":"Embouts GameBit 3,8 et 4,5 mm — tige 50 ou 100 mm, à l'unité ou par cinq jeux","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eEmbouts GameBit : choisir la longueur de tige avant tout le reste\u003c\/h2\u003e\n\u003cp\u003eSur une vis de sécurité, le diamètre ne suffit pas à décider : c'est la \u003cstrong style=\"color:#0097ac;\"\u003elongueur de tige\u003c\/strong\u003e qui fait passer ou non l'outil. Une cartouche plate se dévisse avec 50 mm ; une cartouche \u003cstrong style=\"color:#0097ac;\"\u003eNintendo 64\u003c\/strong\u003e, dont la vis est logée au fond d'un puits, exige les \u003cstrong style=\"color:#0097ac;\"\u003e100 mm\u003c\/strong\u003e. Les deux longueurs sont proposées ici, à l'unité ou par \u003cstrong style=\"color:#0097ac;\"\u003ecinq jeux\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDeux longueurs au choix\u003c\/strong\u003e : 50 mm pour les cartouches plates et les coques, 100 mm pour atteindre une vis encaissée.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLes deux diamètres du standard\u003c\/strong\u003e : 3,8 mm pour les cartouches, 4,5 mm pour les coques, les manettes et les blocs secteur.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eLot de cinq jeux\u003c\/strong\u003e : pour un atelier, un club de rétro gaming ou simplement pour ne plus en chercher un.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLa tige 50 mm n'atteint pas la vis d'une cartouche Nintendo 64 : c'est précisément le cas qui impose le 100 mm.\u003c\/li\u003e\n\u003cli\u003eNe remplace pas un tournevis tri-wing Y : les portables à clapet utilisent une vis à trois ailes.\u003c\/li\u003e\n\u003cli\u003eN'ouvre pas les coques à vis Torx de sécurité.\u003c\/li\u003e\n\u003cli\u003eNe contient aucun cruciforme pour la carte mère.\u003c\/li\u003e\n\u003cli\u003eLivré sans console, sans cartouche et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3,8 mm\u003c\/strong\u003e : cartouches NES, Super Nintendo, Mega Drive \/ Genesis, Game Boy, Game Boy Color, Game Boy Advance. Ajouter la tige 100 mm pour les cartouches Nintendo 64.\u003cbr\u003e\u003cstrong\u003e4,5 mm\u003c\/strong\u003e : coques de NES, Super Nintendo, Mega Drive, Nintendo 64, GameCube, manettes et blocs secteur.\u003cbr\u003eNe couvre ni les vis tri-wing Y, ni les vis cruciformes, ni les vis Torx.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure, aucune découpe. Ces embouts se montent sur un manche ou un porte-embouts. Sur une vis récalcitrante, un manche plein transmet mieux l'appui qu'un porte-embouts magnétique, dont le jeu mécanique absorbe la poussée.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelon la variante choisie : un jeu ou cinq jeux d'embouts 3,8 et 4,5 mm, en tige 50 mm ou 100 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/tournevis-embouts\" style=\"color:#0097ac;\"\u003eTournevis \u0026amp; embouts\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"100 mm \/ 1 jeu","offer_id":54771821936973,"sku":"1005006119321967-100MM-1set","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"100 mm \/ 5 jeux","offer_id":54771821969741,"sku":"1005006119321967-100MM-5set","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"50 mm \/ 1 jeu","offer_id":54771822002509,"sku":"1005006119321967-50MM-1set","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"50 mm \/ 5 jeux","offer_id":54771822035277,"sku":"1005006119321967-50MM-5set","price":18.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/Sfdc02b675966491786493d6de0fdca39Q.webp?v=1789663052"},{"product_id":"tournevis-securite-3-8-4-5-tri-wing-y","title":"Tournevis de sécurité 3,8 \/ 4,5 mm et tri-wing Y 2.0 et 2.5 — à l'unité ou en jeu","description":"\u003ch2 style=\"color:#111213;font-size:1.6em;\"\u003eTournevis de sécurité et tri-wing : prendre exactement l'embout qui manque\u003c\/h2\u003e\n\u003cp\u003eQuand on ne répare qu'une machine, acheter un coffret complet n'a pas de sens. Cette référence se choisit \u003cstrong style=\"color:#0097ac;\"\u003eembout par embout\u003c\/strong\u003e : les vis de sécurité \u003cstrong style=\"color:#0097ac;\"\u003e3,8 et 4,5 mm\u003c\/strong\u003e du matériel de salon, ou les vis \u003cstrong style=\"color:#0097ac;\"\u003etri-wing Y en 2.0 et 2.5\u003c\/strong\u003e des consoles portables — séparément, ou réunies.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça fait\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eCinq configurations\u003c\/strong\u003e : 3,8 + 4,5 mm, tri-wing Y 2.5 seul, Y 2.0 seul, Y 2.0 + 2.5, ou l'ensemble en 3 en 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eDeux diamètres de tri-wing\u003c\/strong\u003e : le 2.0 et le 2.5, là où la plupart des jeux généralistes n'en livrent qu'un.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"color:#0097ac;\"\u003eTête creuse\u003c\/strong\u003e sur les embouts de sécurité, seule prise possible sur une vis à ergot central.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCe que ça ne fait pas\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTige courte : n'atteint pas la vis encaissée au fond du puits d'une cartouche Nintendo 64.\u003c\/li\u003e\n\u003cli\u003eNe couvre pas le tri-wing Y 0.6 ni le Y 1.5, utilisés sur les plus petites machines et sur certaines manettes récentes.\u003c\/li\u003e\n\u003cli\u003eNe contient aucun cruciforme : la carte mère, une fois la coque ouverte, demande un autre tournevis.\u003c\/li\u003e\n\u003cli\u003eAcier d'entrée de gamme : l'empreinte peut s'arrondir si l'on tourne avant d'appuyer.\u003c\/li\u003e\n\u003cli\u003eLivré sans console, sans cartouche et sans jeux.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eCompatibilité\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e3,8 mm\u003c\/strong\u003e : cartouches NES, Super Nintendo, Mega Drive \/ Genesis, Game Boy, Game Boy Color, Game Boy Advance.\u003cbr\u003e\u003cstrong\u003e4,5 mm\u003c\/strong\u003e : coques de consoles de salon, manettes et blocs secteur de la même période.\u003cbr\u003e\u003cstrong\u003eTri-wing Y 2.0 et 2.5\u003c\/strong\u003e : coques de Game Boy, Game Boy Color, Game Boy Advance, Game Boy Advance SP, DS et DS Lite selon la révision.\u003cbr\u003eNon couverts : Y 0.6, Y 1.5, vis cruciformes, vis Torx.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eNiveau requis\u003c\/h3\u003e\n\u003cp\u003eAucune soudure, aucune découpe. Ces outils ouvrent la coque ou la cartouche ; la suite du démontage demande un cruciforme fin et une spatule en plastique. Identifier la vis avant de commander évite de recevoir le mauvais diamètre.\u003c\/p\u003e\n\n\u003ch3 style=\"color:#111213;font-size:1.35em;\"\u003eDans le colis\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelon la variante choisie : les deux embouts de sécurité, un ou deux tri-wing Y, ou l'ensemble en 3 en 1.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp style=\"margin-top:16px;\"\u003eÀ lire avant de commander : \u003ca href=\"https:\/\/fun-esports.com\/collections\/tournevis-embouts\" style=\"color:#0097ac;\"\u003eTournevis \u0026amp; embouts\u003c\/a\u003e · \u003ca href=\"https:\/\/fun-esports.com\/collections\/atelier-modding\" style=\"color:#0097ac;\"\u003eAtelier \u0026amp; modding\u003c\/a\u003e\u003c\/p\u003e","brand":"Fun-Esports","offers":[{"title":"3,8 et 4,5 mm","offer_id":54771822100813,"sku":"1005007266676984-3.8mm  4.5mm","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Tri-wing Y 2.5","offer_id":54771822133581,"sku":"1005007266676984-2.5 Y","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"3 en 1","offer_id":54771822166349,"sku":"1005007266676984-3 in 1","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Tri-wing Y 2.0 et 2.5","offer_id":54771822199117,"sku":"1005007266676984-2.0  2.5","price":14.99,"currency_code":"EUR","in_stock":true},{"title":"Tri-wing Y 2.0","offer_id":54771822231885,"sku":"1005007266676984-2.0","price":14.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/7636\/5133\/files\/H2265ce3468b74eec9a1376fdae53d347d.webp?v=1789663053"}],"url":"https:\/\/fun-esports.com\/en\/collections\/outils-atelier.oembed?page=3","provider":"Fun-Esports","version":"1.0","type":"link"}